{
  "schema": "component_image_evidence_v1",
  "component_id": "component_36",
  "selection_policy": "Post-functional-group part-level checking uses only all-face highlight images generated under functional_group_evidence/<group_id>/all_face_highlights. Initial extraction images and part_check reused images are excluded.",
  "target_part_image_plan": {
    "excluded": true,
    "reason": "Initial extraction or direct part image plans are not allowed in the post-functional-group part-level checking stage."
  },
  "target_part_check_evidence": {
    "component_id": "component_36",
    "instance_name": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
    "display_name": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
    "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
    "status": "ok",
    "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.",
    "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_36",
    "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\section_brep_report.json",
    "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_36\\reused_part_check_evidence.json",
    "image_namespace": "part_check_extractions/component_36/reused_image_refs",
    "source_image_namespace": "extractions/primary_y/model_images",
    "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.",
    "feature_graph": {
      "schema": "reused_component_feature_graph_subset_v1",
      "source": "initial_assembly_extraction.FeatureGraph",
      "features": [
        {
          "Id": "hole_group_3",
          "Type": "hole_feature",
          "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
          "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
          "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
          "FaceRefs": [
            "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#1"
          ],
          "Confidence": 0.74,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "fastener_hole_candidate",
            "port_or_pin_hole_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_hole_entry_location_in_model_images",
            "confirm_whether_entry_has_flat_pad_or_spotface",
            "confirm_whether_hole_is_internal_external_or_edge_near"
          ],
          "RequiredBrepChecks": [
            "entry_face_normal_vs_hole_axis_angle",
            "hole_throughness_or_blind_depth",
            "minimum_edge_clearance_to_neighbor_boundaries",
            "spotface_or_counterbore_detection",
            "hole_pattern_grouping_by_center_parameters"
          ],
          "Geometry": {
            "radius_mm": 1.5,
            "diameter_mm": 3,
            "axis": [
              0,
              -1,
              -0
            ],
            "center_points_mm": [
              [
                -117.068,
                -70.748,
                43.65
              ]
            ],
            "entry_face_candidate_refs": [
              "电机与大臂外壳连接件1-1:face#34",
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#410",
              "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#26",
              "电机与大臂外壳连接件3-1:face#23"
            ],
            "member_count": 1,
            "pattern_type": "single_hole_candidate",
            "grouping_basis": "fallback same component, axis direction, and diameter",
            "pattern_plane_normal": [
              0,
              -1,
              -0
            ],
            "pattern_center_mm": [
              -117.068,
              -70.748,
              43.65
            ]
          }
        },
        {
          "Id": "hole_group_13",
          "Type": "hole_feature",
          "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
          "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
          "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
          "FaceRefs": [
            "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#3"
          ],
          "Confidence": 0.74,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "fastener_hole_candidate",
            "port_or_pin_hole_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_hole_entry_location_in_model_images",
            "confirm_whether_entry_has_flat_pad_or_spotface",
            "confirm_whether_hole_is_internal_external_or_edge_near"
          ],
          "RequiredBrepChecks": [
            "entry_face_normal_vs_hole_axis_angle",
            "hole_throughness_or_blind_depth",
            "minimum_edge_clearance_to_neighbor_boundaries",
            "spotface_or_counterbore_detection",
            "hole_pattern_grouping_by_center_parameters"
          ],
          "Geometry": {
            "radius_mm": 2.75,
            "diameter_mm": 5.5,
            "axis": [
              0,
              -1,
              -0
            ],
            "center_points_mm": [
              [
                -117.068,
                -78.173,
                43.65
              ]
            ],
            "entry_face_candidate_refs": [
              "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#12",
              "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1:face#12",
              "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-2:face#12",
              "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/WG_CSG_SHG-20_C_8_WG1044040-1:face#30"
            ],
            "member_count": 1,
            "pattern_type": "single_hole_candidate",
            "grouping_basis": "fallback same component, axis direction, and diameter",
            "pattern_plane_normal": [
              0,
              -1,
              -0
            ],
            "pattern_center_mm": [
              -117.068,
              -78.173,
              43.65
            ]
          }
        }
      ],
      "relations": []
    },
    "faces": [
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 1,
        "FaceKind": "cylinder",
        "AreaMm2": 108.856,
        "CenterMm": [
          -117.068,
          -70.748,
          43.65
        ],
        "BBoxMm": [
          -118.568,
          -76.523,
          42.15,
          -115.568,
          -64.973,
          45.15
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -117.068,
          -79.723,
          43.65
        ],
        "Axis": [
          0,
          -1,
          -0
        ],
        "RadiusMm": 1.5,
        "DiameterMm": 3,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 2,
        "FaceKind": "plane",
        "AreaMm2": 16.712,
        "CenterMm": [
          -117.068,
          -79.723,
          43.65
        ],
        "BBoxMm": [
          -119.718,
          -79.723,
          41,
          -114.418,
          -79.723,
          46.3
        ],
        "Normal": [
          -0,
          1,
          0
        ],
        "RootPointMm": [
          -117.068,
          -79.723,
          43.65
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 3,
        "FaceKind": "cylinder",
        "AreaMm2": 50.108,
        "CenterMm": [
          -117.068,
          -78.173,
          43.65
        ],
        "BBoxMm": [
          -119.818,
          -79.623,
          40.9,
          -114.318,
          -76.723,
          46.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -117.068,
          -79.723,
          43.65
        ],
        "Axis": [
          0,
          -1,
          -0
        ],
        "RadiusMm": 2.75,
        "DiameterMm": 5.5,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 4,
        "FaceKind": "plane",
        "AreaMm2": 14.679,
        "CenterMm": [
          -117.068,
          -76.723,
          43.65
        ],
        "BBoxMm": [
          -119.818,
          -76.723,
          40.9,
          -114.318,
          -76.723,
          46.4
        ],
        "Normal": [
          0,
          -1,
          -0
        ],
        "RootPointMm": [
          -117.068,
          -76.723,
          46.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 5,
        "FaceKind": "other",
        "AreaMm2": 3.104,
        "CenterMm": [
          -117.068,
          -76.623,
          43.65
        ],
        "BBoxMm": [
          -118.768,
          -76.723,
          41.95,
          -115.368,
          -76.523,
          45.35
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "unknown",
        "FunctionalRole": "unknown",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 6,
        "FaceKind": "plane",
        "AreaMm2": 1.866,
        "CenterMm": [
          -115.992,
          -79.073,
          43.029
        ],
        "BBoxMm": [
          -116.351,
          -79.723,
          42.408,
          -115.633,
          -78.423,
          43.65
        ],
        "Normal": [
          0.866,
          0,
          -0.5
        ],
        "RootPointMm": [
          -116.351,
          -78.423,
          42.408
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 7,
        "FaceKind": "plane",
        "AreaMm2": 1.866,
        "CenterMm": [
          -117.068,
          -79.073,
          42.408
        ],
        "BBoxMm": [
          -117.786,
          -79.723,
          42.408,
          -116.351,
          -78.423,
          42.408
        ],
        "Normal": [
          -0,
          0,
          -1
        ],
        "RootPointMm": [
          -117.786,
          -78.423,
          42.408
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "downward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 8,
        "FaceKind": "plane",
        "AreaMm2": 1.866,
        "CenterMm": [
          -118.145,
          -79.073,
          43.029
        ],
        "BBoxMm": [
          -118.503,
          -79.723,
          42.408,
          -117.786,
          -78.423,
          43.65
        ],
        "Normal": [
          -0.866,
          -0,
          -0.5
        ],
        "RootPointMm": [
          -118.503,
          -78.423,
          43.65
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 9,
        "FaceKind": "plane",
        "AreaMm2": 1.866,
        "CenterMm": [
          -118.145,
          -79.073,
          44.272
        ],
        "BBoxMm": [
          -118.503,
          -79.723,
          43.65,
          -117.786,
          -78.423,
          44.893
        ],
        "Normal": [
          -0.866,
          -0,
          0.5
        ],
        "RootPointMm": [
          -117.786,
          -78.423,
          44.893
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 10,
        "FaceKind": "plane",
        "AreaMm2": 1.865,
        "CenterMm": [
          -117.068,
          -79.073,
          44.893
        ],
        "BBoxMm": [
          -117.786,
          -79.723,
          44.893,
          -116.351,
          -78.423,
          44.893
        ],
        "Normal": [
          0,
          -0,
          1
        ],
        "RootPointMm": [
          -116.351,
          -78.423,
          44.893
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 11,
        "FaceKind": "plane",
        "AreaMm2": 1.866,
        "CenterMm": [
          -115.992,
          -79.073,
          44.272
        ],
        "BBoxMm": [
          -116.351,
          -79.723,
          43.65,
          -115.633,
          -78.423,
          44.893
        ],
        "Normal": [
          0.866,
          0,
          0.5
        ],
        "RootPointMm": [
          -115.633,
          -78.423,
          43.65
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 12,
        "FaceKind": "plane",
        "AreaMm2": 5.35,
        "CenterMm": [
          -117.068,
          -78.423,
          43.65
        ],
        "BBoxMm": [
          -118.503,
          -78.423,
          42.408,
          -115.633,
          -78.423,
          44.893
        ],
        "Normal": [
          -0,
          1,
          0
        ],
        "RootPointMm": [
          -116.351,
          -78.423,
          42.408
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 13,
        "FaceKind": "other",
        "AreaMm2": 4.032,
        "CenterMm": [
          -117.068,
          -64.848,
          43.65
        ],
        "BBoxMm": [
          -118.568,
          -64.973,
          42.15,
          -115.568,
          -64.723,
          45.15
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "unknown",
        "FunctionalRole": "unknown",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 14,
        "FaceKind": "plane",
        "AreaMm2": 3.577,
        "CenterMm": [
          -117.068,
          -64.723,
          43.65
        ],
        "BBoxMm": [
          -118.135,
          -64.723,
          42.583,
          -116.001,
          -64.723,
          44.717
        ],
        "Normal": [
          0,
          -1,
          -0
        ],
        "RootPointMm": [
          -117.068,
          -64.723,
          45.15
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3",
        "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3 (GB／T70．1-2000内六角圆柱头螺钉M3×12)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 15,
        "FaceKind": "other",
        "AreaMm2": 2.678,
        "CenterMm": [
          -117.068,
          -79.673,
          43.65
        ],
        "BBoxMm": [
          -119.818,
          -79.723,
          40.9,
          -114.318,
          -79.623,
          46.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "unknown",
        "FunctionalRole": "unknown",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      }
    ],
    "counts": {
      "features": 2,
      "faces": 15,
      "image_views": 0
    },
    "image_policy": "All initial extraction images and part_check reused images are excluded from the post-functional-group part-level checking stage. Use available_target_images with image_kind=functional_group_all_face_highlight only."
  },
  "target_context_image_plans": [],
  "available_target_images": []
}