{
  "schema": "component_target_brep_v1",
  "component_id": "component_42",
  "selection_policy": "Only features and faces owned by this exact component instance are included.",
  "features": [
    {
      "Id": "hole_group_6",
      "Type": "hole_group",
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "FaceRefs": [
        "轴承与连接臂连接件-1:face#1",
        "轴承与连接臂连接件-1:face#2",
        "轴承与连接臂连接件-1:face#3",
        "轴承与连接臂连接件-1:face#4"
      ],
      "Confidence": 0.74,
      "Source": "brep_cylinder_grouping",
      "PossibleFunctions": [
        "fastener_hole_candidate",
        "port_or_pin_hole_candidate"
      ],
      "VisualObservationNeeds": [
        "confirm_hole_entry_location_in_model_images",
        "confirm_whether_entry_has_flat_pad_or_spotface",
        "confirm_whether_hole_is_internal_external_or_edge_near"
      ],
      "RequiredBrepChecks": [
        "entry_face_normal_vs_hole_axis_angle",
        "hole_throughness_or_blind_depth",
        "minimum_edge_clearance_to_neighbor_boundaries",
        "spotface_or_counterbore_detection",
        "hole_pattern_grouping_by_center_parameters"
      ],
      "Geometry": {
        "radius_mm": 3,
        "diameter_mm": 6,
        "axis": [
          -0,
          1,
          -0
        ],
        "center_points_mm": [
          [
            -98.449,
            -25.224,
            44.4
          ],
          [
            -98.449,
            -25.224,
            64.4
          ],
          [
            -108.449,
            -25.224,
            54.4
          ],
          [
            -88.449,
            -25.224,
            54.4
          ]
        ],
        "entry_face_candidate_refs": [
          "电机与大臂外壳连接件1-1:face#24",
          "电机与大臂外壳连接件3-1:face#1",
          "电机与大臂外壳连接件1-1:face#57",
          "GB／T276-94深沟球轴承61810-2Z-1:face#210"
        ],
        "member_count": 4,
        "pattern_type": "parallel_circular_hole_pattern",
        "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution",
        "pattern_plane_normal": [
          -0,
          1,
          -0
        ],
        "pattern_plane_t_mm": -25.224,
        "pattern_center_mm": [
          -98.449,
          -25.224,
          54.4
        ],
        "pattern_radius_mm": 10,
        "spacing_mm": 14.142
      }
    },
    {
      "Id": "cylindrical_surface_group_19",
      "Type": "main_axis_cylindrical_surface_group",
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "FaceRefs": [
        "轴承与连接臂连接件-1:face#5"
      ],
      "Confidence": 0.7,
      "Source": "brep_cylinder_grouping",
      "PossibleFunctions": [
        "bearing_or_hinge_seat_candidate",
        "internal_cylindrical_surface_candidate",
        "shell_arc_candidate"
      ],
      "VisualObservationNeeds": [
        "confirm_internal_or_external_side_from_images",
        "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
      ],
      "RequiredBrepChecks": [
        "internal_external_classification",
        "tool_access_direction_and_surrounding_wall_clearance",
        "surface_continuity_and_interruption"
      ],
      "Geometry": {
        "radius_mm": 25,
        "diameter_mm": 50,
        "axis": [
          0,
          -1,
          0
        ],
        "axis_point_mm": [
          -98.449,
          -23.724,
          54.4
        ],
        "total_area_mm2": 1413.717,
        "member_count": 1
      }
    },
    {
      "Id": "planar_surface_candidate_7",
      "Type": "planar_pad_step_or_face_candidate",
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "FaceRefs": [
        "轴承与连接臂连接件-1:face#6"
      ],
      "Confidence": 0.62,
      "Source": "brep_plane_face",
      "PossibleFunctions": [
        "mounting_pad_candidate",
        "step_face_candidate",
        "datum_or_machined_face_candidate"
      ],
      "VisualObservationNeeds": [
        "confirm_whether_face_is_visible_as_real_plane_or_projection",
        "confirm_if_face_contacts_other_parts_or appears as mounting pad"
      ],
      "RequiredBrepChecks": [
        "adjacency_to_nonmachined_regions",
        "contact_or_fit_evidence",
        "local_height_difference_to_surrounding_faces"
      ],
      "Geometry": {
        "area_mm2": 1850.398,
        "normal": [
          -0,
          1,
          -0
        ],
        "center_mm": [
          -98.449,
          -23.724,
          54.4
        ],
        "bbox_mm": [
          -123.449,
          -23.724,
          29.4,
          -73.449,
          -23.724,
          79.4
        ]
      }
    },
    {
      "Id": "planar_surface_candidate_9",
      "Type": "planar_pad_step_or_face_candidate",
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "FaceRefs": [
        "轴承与连接臂连接件-1:face#7"
      ],
      "Confidence": 0.62,
      "Source": "brep_plane_face",
      "PossibleFunctions": [
        "mounting_pad_candidate",
        "step_face_candidate",
        "datum_or_machined_face_candidate"
      ],
      "VisualObservationNeeds": [
        "confirm_whether_face_is_visible_as_real_plane_or_projection",
        "confirm_if_face_contacts_other_parts_or appears as mounting pad"
      ],
      "RequiredBrepChecks": [
        "adjacency_to_nonmachined_regions",
        "contact_or_fit_evidence",
        "local_height_difference_to_surrounding_faces"
      ],
      "Geometry": {
        "area_mm2": 1649.128,
        "normal": [
          -0,
          1,
          -0
        ],
        "center_mm": [
          -98.449,
          -32.724,
          54.4
        ],
        "bbox_mm": [
          -123.449,
          -32.724,
          29.4,
          -73.449,
          -32.724,
          79.4
        ]
      }
    }
  ],
  "faces": [
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 1,
      "FaceKind": "cylinder",
      "AreaMm2": 56.549,
      "CenterMm": [
        -98.449,
        -25.224,
        44.4
      ],
      "BBoxMm": [
        -101.449,
        -26.724,
        41.4,
        -95.449,
        -23.724,
        47.4
      ],
      "Normal": [],
      "RootPointMm": [],
      "AxisPointMm": [
        -98.449,
        -32.724,
        44.4
      ],
      "Axis": [
        -0,
        1,
        -0
      ],
      "RadiusMm": 3,
      "DiameterMm": 6,
      "OrientationRole": "shaft_axis_cylindrical_face",
      "FunctionalRole": "cylindrical_feature",
      "SurfaceProcessRole": "machined_feature_candidate",
      "ProcessConfidence": "low",
      "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
      "MachiningScope": "feature_surface"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 2,
      "FaceKind": "cylinder",
      "AreaMm2": 56.549,
      "CenterMm": [
        -98.449,
        -25.224,
        64.4
      ],
      "BBoxMm": [
        -101.449,
        -26.724,
        61.4,
        -95.449,
        -23.724,
        67.4
      ],
      "Normal": [],
      "RootPointMm": [],
      "AxisPointMm": [
        -98.449,
        -32.724,
        64.4
      ],
      "Axis": [
        -0,
        1,
        -0
      ],
      "RadiusMm": 3,
      "DiameterMm": 6,
      "OrientationRole": "shaft_axis_cylindrical_face",
      "FunctionalRole": "cylindrical_feature",
      "SurfaceProcessRole": "machined_feature_candidate",
      "ProcessConfidence": "low",
      "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
      "MachiningScope": "feature_surface"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 3,
      "FaceKind": "cylinder",
      "AreaMm2": 56.549,
      "CenterMm": [
        -108.449,
        -25.224,
        54.4
      ],
      "BBoxMm": [
        -111.449,
        -26.724,
        51.4,
        -105.449,
        -23.724,
        57.4
      ],
      "Normal": [],
      "RootPointMm": [],
      "AxisPointMm": [
        -108.449,
        -32.724,
        54.4
      ],
      "Axis": [
        -0,
        1,
        -0
      ],
      "RadiusMm": 3,
      "DiameterMm": 6,
      "OrientationRole": "shaft_axis_cylindrical_face",
      "FunctionalRole": "cylindrical_feature",
      "SurfaceProcessRole": "machined_feature_candidate",
      "ProcessConfidence": "low",
      "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
      "MachiningScope": "feature_surface"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 4,
      "FaceKind": "cylinder",
      "AreaMm2": 56.549,
      "CenterMm": [
        -88.449,
        -25.224,
        54.4
      ],
      "BBoxMm": [
        -91.449,
        -26.724,
        51.4,
        -85.449,
        -23.724,
        57.4
      ],
      "Normal": [],
      "RootPointMm": [],
      "AxisPointMm": [
        -88.449,
        -32.724,
        54.4
      ],
      "Axis": [
        -0,
        1,
        -0
      ],
      "RadiusMm": 3,
      "DiameterMm": 6,
      "OrientationRole": "shaft_axis_cylindrical_face",
      "FunctionalRole": "cylindrical_feature",
      "SurfaceProcessRole": "machined_feature_candidate",
      "ProcessConfidence": "low",
      "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
      "MachiningScope": "feature_surface"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 5,
      "FaceKind": "cylinder",
      "AreaMm2": 1413.717,
      "CenterMm": [
        -98.449,
        -28.224,
        54.4
      ],
      "BBoxMm": [
        -123.449,
        -32.724,
        29.4,
        -73.449,
        -23.724,
        79.4
      ],
      "Normal": [],
      "RootPointMm": [],
      "AxisPointMm": [
        -98.449,
        -23.724,
        54.4
      ],
      "Axis": [
        0,
        -1,
        0
      ],
      "RadiusMm": 25,
      "DiameterMm": 50,
      "OrientationRole": "shaft_axis_cylindrical_face",
      "FunctionalRole": "cylindrical_feature",
      "SurfaceProcessRole": "machined_feature_candidate",
      "ProcessConfidence": "low",
      "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
      "MachiningScope": "feature_surface"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 6,
      "FaceKind": "plane",
      "AreaMm2": 1850.398,
      "CenterMm": [
        -98.449,
        -23.724,
        54.4
      ],
      "BBoxMm": [
        -123.449,
        -23.724,
        29.4,
        -73.449,
        -23.724,
        79.4
      ],
      "Normal": [
        -0,
        1,
        -0
      ],
      "RootPointMm": [
        -98.449,
        -23.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "axial_end_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 7,
      "FaceKind": "plane",
      "AreaMm2": 1649.128,
      "CenterMm": [
        -98.449,
        -32.724,
        54.4
      ],
      "BBoxMm": [
        -123.449,
        -32.724,
        29.4,
        -73.449,
        -32.724,
        79.4
      ],
      "Normal": [
        -0,
        1,
        -0
      ],
      "RootPointMm": [
        -98.449,
        -32.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "axial_end_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 8,
      "FaceKind": "plane",
      "AreaMm2": 50.317,
      "CenterMm": [
        -88.449,
        -26.724,
        54.4
      ],
      "BBoxMm": [
        -93.949,
        -26.724,
        49.637,
        -82.949,
        -26.724,
        59.164
      ],
      "Normal": [
        0,
        -1,
        0
      ],
      "RootPointMm": [
        -98.449,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "axial_end_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 9,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -84.324,
        -29.724,
        56.782
      ],
      "BBoxMm": [
        -85.699,
        -32.724,
        54.4,
        -82.949,
        -26.724,
        59.164
      ],
      "Normal": [
        0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -82.949,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 10,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -84.324,
        -29.724,
        52.019
      ],
      "BBoxMm": [
        -85.699,
        -32.724,
        49.637,
        -82.949,
        -26.724,
        54.4
      ],
      "Normal": [
        0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -85.699,
        -26.724,
        49.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 11,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -88.449,
        -29.724,
        49.637
      ],
      "BBoxMm": [
        -91.199,
        -32.724,
        49.637,
        -85.699,
        -26.724,
        49.637
      ],
      "Normal": [
        0,
        -0,
        -1
      ],
      "RootPointMm": [
        -91.199,
        -26.724,
        49.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "downward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 12,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -92.574,
        -29.724,
        52.019
      ],
      "BBoxMm": [
        -93.949,
        -32.724,
        49.637,
        -91.199,
        -26.724,
        54.4
      ],
      "Normal": [
        -0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -93.949,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 13,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -92.574,
        -29.724,
        56.782
      ],
      "BBoxMm": [
        -93.949,
        -32.724,
        54.4,
        -91.199,
        -26.724,
        59.164
      ],
      "Normal": [
        -0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -91.199,
        -26.724,
        59.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 14,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -88.449,
        -29.724,
        59.164
      ],
      "BBoxMm": [
        -91.199,
        -32.724,
        59.164,
        -85.699,
        -26.724,
        59.164
      ],
      "Normal": [
        -0,
        0,
        1
      ],
      "RootPointMm": [
        -85.699,
        -26.724,
        59.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "upward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 15,
      "FaceKind": "plane",
      "AreaMm2": 50.317,
      "CenterMm": [
        -108.449,
        -26.724,
        54.4
      ],
      "BBoxMm": [
        -113.949,
        -26.724,
        49.637,
        -102.949,
        -26.724,
        59.164
      ],
      "Normal": [
        0,
        -1,
        0
      ],
      "RootPointMm": [
        -98.449,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "axial_end_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 16,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -108.449,
        -29.724,
        59.164
      ],
      "BBoxMm": [
        -111.199,
        -32.724,
        59.164,
        -105.699,
        -26.724,
        59.164
      ],
      "Normal": [
        -0,
        0,
        1
      ],
      "RootPointMm": [
        -105.699,
        -26.724,
        59.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "upward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 17,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -104.324,
        -29.724,
        56.782
      ],
      "BBoxMm": [
        -105.699,
        -32.724,
        54.4,
        -102.949,
        -26.724,
        59.164
      ],
      "Normal": [
        0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -102.949,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 18,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -104.324,
        -29.724,
        52.019
      ],
      "BBoxMm": [
        -105.699,
        -32.724,
        49.637,
        -102.949,
        -26.724,
        54.4
      ],
      "Normal": [
        0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -105.699,
        -26.724,
        49.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 19,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -108.449,
        -29.724,
        49.637
      ],
      "BBoxMm": [
        -111.199,
        -32.724,
        49.637,
        -105.699,
        -26.724,
        49.637
      ],
      "Normal": [
        0,
        -0,
        -1
      ],
      "RootPointMm": [
        -111.199,
        -26.724,
        49.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "downward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 20,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -112.574,
        -29.724,
        52.019
      ],
      "BBoxMm": [
        -113.949,
        -32.724,
        49.637,
        -111.199,
        -26.724,
        54.4
      ],
      "Normal": [
        -0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -113.949,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 21,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -112.574,
        -29.724,
        56.782
      ],
      "BBoxMm": [
        -113.949,
        -32.724,
        54.4,
        -111.199,
        -26.724,
        59.164
      ],
      "Normal": [
        -0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -111.199,
        -26.724,
        59.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 22,
      "FaceKind": "plane",
      "AreaMm2": 50.317,
      "CenterMm": [
        -98.449,
        -26.724,
        64.4
      ],
      "BBoxMm": [
        -103.949,
        -26.724,
        59.637,
        -92.949,
        -26.724,
        69.164
      ],
      "Normal": [
        0,
        -1,
        0
      ],
      "RootPointMm": [
        -98.449,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "axial_end_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 23,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -98.449,
        -29.724,
        69.164
      ],
      "BBoxMm": [
        -101.199,
        -32.724,
        69.164,
        -95.699,
        -26.724,
        69.164
      ],
      "Normal": [
        -0,
        0,
        1
      ],
      "RootPointMm": [
        -95.699,
        -26.724,
        69.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "upward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 24,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -94.324,
        -29.724,
        66.782
      ],
      "BBoxMm": [
        -95.699,
        -32.724,
        64.4,
        -92.949,
        -26.724,
        69.164
      ],
      "Normal": [
        0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -92.949,
        -26.724,
        64.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 25,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -94.324,
        -29.724,
        62.019
      ],
      "BBoxMm": [
        -95.699,
        -32.724,
        59.637,
        -92.949,
        -26.724,
        64.4
      ],
      "Normal": [
        0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -95.699,
        -26.724,
        59.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 26,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -98.449,
        -29.724,
        59.637
      ],
      "BBoxMm": [
        -101.199,
        -32.724,
        59.637,
        -95.699,
        -26.724,
        59.637
      ],
      "Normal": [
        0,
        -0,
        -1
      ],
      "RootPointMm": [
        -101.199,
        -26.724,
        59.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "downward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 27,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -102.574,
        -29.724,
        62.019
      ],
      "BBoxMm": [
        -103.949,
        -32.724,
        59.637,
        -101.199,
        -26.724,
        64.4
      ],
      "Normal": [
        -0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -103.949,
        -26.724,
        64.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 28,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -102.574,
        -29.724,
        66.782
      ],
      "BBoxMm": [
        -103.949,
        -32.724,
        64.4,
        -101.199,
        -26.724,
        69.164
      ],
      "Normal": [
        -0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -101.199,
        -26.724,
        69.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 29,
      "FaceKind": "plane",
      "AreaMm2": 50.317,
      "CenterMm": [
        -98.449,
        -26.724,
        44.4
      ],
      "BBoxMm": [
        -103.949,
        -26.724,
        39.637,
        -92.949,
        -26.724,
        49.164
      ],
      "Normal": [
        0,
        -1,
        0
      ],
      "RootPointMm": [
        -98.449,
        -26.724,
        54.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "axial_end_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 30,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -98.449,
        -29.724,
        39.637
      ],
      "BBoxMm": [
        -101.199,
        -32.724,
        39.637,
        -95.699,
        -26.724,
        39.637
      ],
      "Normal": [
        0,
        -0,
        -1
      ],
      "RootPointMm": [
        -101.199,
        -26.724,
        39.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "downward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 31,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -102.574,
        -29.724,
        42.019
      ],
      "BBoxMm": [
        -103.949,
        -32.724,
        39.637,
        -101.199,
        -26.724,
        44.4
      ],
      "Normal": [
        -0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -103.949,
        -26.724,
        44.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 32,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -102.574,
        -29.724,
        46.782
      ],
      "BBoxMm": [
        -103.949,
        -32.724,
        44.4,
        -101.199,
        -26.724,
        49.164
      ],
      "Normal": [
        -0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -101.199,
        -26.724,
        49.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 33,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -98.449,
        -29.724,
        49.164
      ],
      "BBoxMm": [
        -101.199,
        -32.724,
        49.164,
        -95.699,
        -26.724,
        49.164
      ],
      "Normal": [
        -0,
        0,
        1
      ],
      "RootPointMm": [
        -95.699,
        -26.724,
        49.164
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "upward_facing_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 34,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -94.324,
        -29.724,
        46.782
      ],
      "BBoxMm": [
        -95.699,
        -32.724,
        44.4,
        -92.949,
        -26.724,
        49.164
      ],
      "Normal": [
        0.866,
        0,
        0.5
      ],
      "RootPointMm": [
        -92.949,
        -26.724,
        44.4
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    },
    {
      "ComponentName": "轴承与连接臂连接件-1",
      "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)",
      "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT",
      "ComponentFileName": "轴承与连接臂连接件.SLDPRT",
      "ComponentCategory": "shaft",
      "FaceIndex": 35,
      "FaceKind": "plane",
      "AreaMm2": 33,
      "CenterMm": [
        -94.324,
        -29.724,
        42.019
      ],
      "BBoxMm": [
        -95.699,
        -32.724,
        39.637,
        -92.949,
        -26.724,
        44.4
      ],
      "Normal": [
        0.866,
        -0,
        -0.5
      ],
      "RootPointMm": [
        -95.699,
        -26.724,
        39.637
      ],
      "AxisPointMm": [],
      "Axis": [],
      "RadiusMm": 0,
      "DiameterMm": 0,
      "OrientationRole": "side_face",
      "FunctionalRole": "planar_feature",
      "SurfaceProcessRole": "unknown_process_surface",
      "ProcessConfidence": "low",
      "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
      "MachiningScope": "unknown"
    }
  ]
}