{ "schema": "component_image_evidence_v1", "component_id": "component_2", "selection_policy": "Post-functional-group part-level checking uses only all-face highlight images generated under functional_group_evidence//all_face_highlights. Initial extraction images and part_check reused images are excluded.", "target_part_image_plan": { "excluded": true, "reason": "Initial extraction or direct part image plans are not allowed in the post-functional-group part-level checking stage." }, "target_part_check_evidence": { "component_id": "component_2", "instance_name": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "display_name": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_2", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_2\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_2/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_4", "Type": "hole_group", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#1", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#2", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#3" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 1.65, "diameter_mm": 3.3, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -117.068, -74.223, 43.65 ], [ -79.829, -74.223, 43.65 ], [ -98.449, -74.223, 75.9 ] ], "entry_face_candidate_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#382", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#387", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#377", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#352", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#392", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#397" ], "member_count": 3, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -74.223, "pattern_center_mm": [ -98.449, -74.223, 54.4 ], "pattern_radius_mm": 21.5, "spacing_mm": 37.239 } }, { "Id": "hole_group_19", "Type": "hole_group", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#7", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#8", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#9", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#10", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#11", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#12", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#13", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#14", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#15", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#16", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#17", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#18", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#19", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#20", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#21", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#22" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 1.75, "diameter_mm": 3.5, "axis": [ 0, -1, 0 ], "center_points_mm": [ [ -125.296, -79.223, 38.9 ], [ -71.602, -79.223, 69.9 ], [ -117.32, -79.223, 29.807 ], [ -106.472, -79.223, 24.457 ], [ -94.403, -79.223, 23.666 ], [ -82.949, -79.223, 27.554 ], [ -73.855, -79.223, 35.529 ], [ -68.505, -79.223, 46.377 ], [ -67.714, -79.223, 58.447 ], [ -79.577, -79.223, 78.994 ], [ -90.425, -79.223, 84.344 ], [ -102.495, -79.223, 85.135 ], [ -113.949, -79.223, 81.247 ], [ -123.043, -79.223, 73.272 ], [ -128.393, -79.223, 62.424 ], [ -129.184, -79.223, 50.354 ] ], "entry_face_candidate_refs": [ "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/WG_CSG_SHG-20_C_8_WG1044040-1:face#62", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#2", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#25", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1:face#2", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-2:face#2" ], "member_count": 16, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -79.223, "pattern_center_mm": [ -98.449, -79.223, 54.4 ], "pattern_radius_mm": 31, "spacing_mm": 12.095 } }, { "Id": "hole_group_32", "Type": "hole_feature", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#23" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 17.5, "diameter_mm": 35, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -98.449, -75.723, 54.4 ] ], "entry_face_candidate_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#4", "电机与大臂外壳连接件1-1:face#32", "电机与大臂外壳连接件3-1:face#15", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#4" ], "member_count": 1, "pattern_type": "single_hole_candidate", "grouping_basis": "fallback same component, axis direction, and diameter", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_center_mm": [ -98.449, -75.723, 54.4 ] } }, { "Id": "hole_group_36", "Type": "hole_group", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#28", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#30", "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#32" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ 0, -1, 0 ], "center_points_mm": [ [ -98.449, -78.223, 75.9 ], [ -79.829, -78.223, 43.65 ], [ -117.068, -78.223, 43.65 ] ], "entry_face_candidate_refs": [ "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1:face#12", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#12", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-2:face#12", "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/WG_CSG_SHG-20_C_8_WG1044040-1:face#30" ], "member_count": 3, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -78.223, "pattern_center_mm": [ -98.449, -78.223, 54.4 ], "pattern_radius_mm": 21.5, "spacing_mm": 37.239 } }, { "Id": "cylindrical_surface_group_21", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 35, "diameter_mm": 70, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, -76.723, 54.4 ], "total_area_mm2": 1099.557, "member_count": 1 } }, { "Id": "cylindrical_surface_group_25", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 25, "diameter_mm": 50, "axis": [ -0, 1, -0 ], "axis_point_mm": [ -98.449, -79.723, 54.4 ], "total_area_mm2": 785.398, "member_count": 1 } }, { "Id": "cylindrical_surface_group_31", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#33" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 26.5, "diameter_mm": 53, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, -79.723, 54.4 ], "total_area_mm2": 333.009, "member_count": 1 } }, { "Id": "planar_surface_candidate_8", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#4" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1731.018, "normal": [ -0, 1, -0 ], "center_mm": [ -98.449, -76.723, 54.4 ], "bbox_mm": [ -146.26, -76.723, 6.59, -50.638, -76.723, 102.211 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 51.836, "CenterMm": [ -117.068, -74.223, 43.65 ], "BBoxMm": [ -119.322, -76.723, 41.397, -114.814, -71.723, 45.904 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -117.068, -79.723, 43.65 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 1.65, "DiameterMm": 3.3, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 2, "FaceKind": "cylinder", "AreaMm2": 51.836, "CenterMm": [ -79.829, -74.223, 43.65 ], "BBoxMm": [ -82.083, -76.723, 41.397, -77.575, -71.723, 45.904 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -79.829, -79.723, 43.65 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 1.65, "DiameterMm": 3.3, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 51.836, "CenterMm": [ -98.449, -74.223, 75.9 ], "BBoxMm": [ -100.703, -76.723, 73.647, -96.195, -71.723, 78.154 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -79.723, 75.9 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 1.65, "DiameterMm": 3.3, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 4, "FaceKind": "plane", "AreaMm2": 1731.018, "CenterMm": [ -98.449, -76.723, 54.4 ], "BBoxMm": [ -146.26, -76.723, 6.59, -50.638, -76.723, 102.211 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -76.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 5, "FaceKind": "plane", "AreaMm2": 1488.33, "CenterMm": [ -98.449, -81.723, 54.4 ], "BBoxMm": [ -146.26, -81.723, 6.59, -50.638, -81.723, 102.211 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -81.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 6, "FaceKind": "cylinder", "AreaMm2": 1099.557, "CenterMm": [ -98.449, -79.223, 54.4 ], "BBoxMm": [ -146.26, -81.723, 6.59, -50.638, -76.723, 102.211 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -76.723, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 35, "DiameterMm": 70, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 7, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -125.296, -79.223, 38.9 ], "BBoxMm": [ -127.686, -81.723, 36.51, -122.905, -76.723, 41.291 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -125.296, -76.723, 38.9 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 8, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -71.602, -79.223, 69.9 ], "BBoxMm": [ -73.993, -81.723, 67.51, -69.211, -76.723, 72.291 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -71.602, -76.723, 69.9 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 9, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -117.32, -79.223, 29.807 ], "BBoxMm": [ -119.711, -81.723, 27.416, -114.93, -76.723, 32.197 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -117.32, -76.723, 29.807 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 10, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -106.472, -79.223, 24.457 ], "BBoxMm": [ -108.863, -81.723, 22.066, -104.082, -76.723, 26.847 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -106.472, -76.723, 24.457 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 11, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -94.403, -79.223, 23.666 ], "BBoxMm": [ -96.793, -81.723, 21.275, -92.012, -76.723, 26.056 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -94.403, -76.723, 23.666 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 12, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -82.949, -79.223, 27.554 ], "BBoxMm": [ -85.339, -81.723, 25.163, -80.558, -76.723, 29.944 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -82.949, -76.723, 27.554 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 13, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -73.855, -79.223, 35.529 ], "BBoxMm": [ -76.245, -81.723, 33.138, -71.464, -76.723, 37.919 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -73.855, -76.723, 35.529 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 14, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -68.505, -79.223, 46.377 ], "BBoxMm": [ -70.896, -81.723, 43.987, -66.115, -76.723, 48.768 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -68.505, -76.723, 46.377 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 15, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -67.714, -79.223, 58.447 ], "BBoxMm": [ -70.105, -81.723, 56.056, -65.323, -76.723, 60.837 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -67.714, -76.723, 58.447 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 16, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -79.577, -79.223, 78.994 ], "BBoxMm": [ -81.968, -81.723, 76.604, -77.187, -76.723, 81.385 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -79.577, -76.723, 78.994 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 17, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -90.425, -79.223, 84.344 ], "BBoxMm": [ -92.816, -81.723, 81.954, -88.035, -76.723, 86.735 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -90.425, -76.723, 84.344 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 18, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -102.495, -79.223, 85.135 ], "BBoxMm": [ -104.886, -81.723, 82.745, -100.105, -76.723, 87.526 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -102.495, -76.723, 85.135 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 19, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -113.949, -79.223, 81.247 ], "BBoxMm": [ -116.339, -81.723, 78.857, -111.558, -76.723, 83.638 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -113.949, -76.723, 81.247 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 20, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -123.043, -79.223, 73.272 ], "BBoxMm": [ -125.433, -81.723, 70.882, -120.652, -76.723, 75.663 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -123.043, -76.723, 73.272 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 21, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -128.393, -79.223, 62.424 ], "BBoxMm": [ -130.783, -81.723, 60.033, -126.002, -76.723, 64.814 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -128.393, -76.723, 62.424 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 22, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -129.184, -79.223, 50.354 ], "BBoxMm": [ -131.574, -81.723, 47.964, -126.793, -76.723, 52.745 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -129.184, -76.723, 50.354 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 23, "FaceKind": "cylinder", "AreaMm2": 879.646, "CenterMm": [ -98.449, -75.723, 54.4 ], "BBoxMm": [ -122.354, -79.723, 30.495, -74.543, -71.723, 78.306 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -79.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 17.5, "DiameterMm": 35, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 24, "FaceKind": "cylinder", "AreaMm2": 785.398, "CenterMm": [ -98.449, -74.223, 54.4 ], "BBoxMm": [ -132.599, -76.723, 20.25, -64.298, -71.723, 88.551 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -79.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 25, "DiameterMm": 50, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 25, "FaceKind": "plane", "AreaMm2": 1159.248, "CenterMm": [ -98.449, -79.723, 54.4 ], "BBoxMm": [ -134.648, -79.723, 18.201, -62.249, -79.723, 90.6 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -79.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 26, "FaceKind": "plane", "AreaMm2": 975.724, "CenterMm": [ -98.449, -71.723, 54.4 ], "BBoxMm": [ -132.599, -71.723, 20.25, -64.298, -71.723, 88.551 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -71.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 27, "FaceKind": "plane", "AreaMm2": 19.721, "CenterMm": [ -98.449, -76.723, 75.9 ], "BBoxMm": [ -102.547, -76.723, 71.802, -94.351, -76.723, 79.999 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -76.723, 75.9 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 28, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -98.449, -78.223, 75.9 ], "BBoxMm": [ -102.547, -79.723, 71.802, -94.351, -76.723, 79.999 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -76.723, 75.9 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 29, "FaceKind": "plane", "AreaMm2": 19.721, "CenterMm": [ -79.829, -76.723, 43.65 ], "BBoxMm": [ -83.927, -76.723, 39.552, -75.731, -76.723, 47.749 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -79.829, -76.723, 43.65 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 30, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -79.829, -78.223, 43.65 ], "BBoxMm": [ -83.927, -79.723, 39.552, -75.731, -76.723, 47.749 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -79.829, -76.723, 43.65 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 31, "FaceKind": "plane", "AreaMm2": 19.721, "CenterMm": [ -117.068, -76.723, 43.65 ], "BBoxMm": [ -121.166, -76.723, 39.552, -112.97, -76.723, 47.749 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -117.068, -76.723, 43.65 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 32, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -117.068, -78.223, 43.65 ], "BBoxMm": [ -121.166, -79.723, 39.552, -112.97, -76.723, 47.749 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -117.068, -76.723, 43.65 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/小臂电机减速器连接法兰-1", "ComponentDisplayName": "小臂关节装配2-1/小臂电机减速器连接法兰-1 (小臂电机减速器连接法兰)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂关节电机\\小臂电机减速器连接法兰.SLDPRT", "ComponentFileName": "小臂电机减速器连接法兰.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 33, "FaceKind": "cylinder", "AreaMm2": 333.009, "CenterMm": [ -98.449, -80.723, 54.4 ], "BBoxMm": [ -134.648, -81.723, 18.201, -62.249, -79.723, 90.6 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -79.723, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 26.5, "DiameterMm": 53, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" } ], "counts": { "features": 8, "faces": 33, "image_views": 4 }, "image_policy": "All initial extraction images and part_check reused images are excluded from the post-functional-group part-level checking stage. Use available_target_images with image_kind=functional_group_all_face_highlight only." }, "target_context_image_plans": [], "available_target_images": [ { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6", "电机与大臂外壳连接件1-1:face#31" ], "physical_interface_id": "physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件1_1_face_31" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -86.9505, 45.65 ], "interface_bbox_mm": [ -146.26, -112.634, 6.59, -50.638, -76.723, 102.211 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24", "电机与大臂外壳连接件1-1:face#33" ], "physical_interface_id": "physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件1_1_face_33" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -74.223, 48.15 ], "interface_bbox_mm": [ -132.599, -76.723, 20.25, -64.298, -71.723, 88.551 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6", "电机与大臂外壳连接件3-1:face#9" ], "physical_interface_id": "physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件3_1_face_9" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -86.9505, 63.150000000000006 ], "interface_bbox_mm": [ -146.26, -112.634, 6.59, -50.638, -76.723, 102.211 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24", "电机与大臂外壳连接件3-1:face#14" ], "physical_interface_id": "physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件3_1_face_14" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -74.223, 60.650000000000006 ], "interface_bbox_mm": [ -132.599, -76.723, 20.25, -64.298, -71.723, 88.551 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6", "电机与大臂外壳连接件1-1:face#31" ], "physical_interface_id": "physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件1_1_face_31" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -86.9505, 45.65 ], "interface_bbox_mm": [ -146.26, -112.634, 6.59, -50.638, -76.723, 102.211 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24", "电机与大臂外壳连接件1-1:face#33" ], "physical_interface_id": "physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件1_1_face_33" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -74.223, 48.15 ], "interface_bbox_mm": [ -132.599, -76.723, 20.25, -64.298, -71.723, 88.551 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6", "电机与大臂外壳连接件3-1:face#9" ], "physical_interface_id": "physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件3_1_face_9" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -86.9505, 63.150000000000006 ], "interface_bbox_mm": [ -146.26, -112.634, 6.59, -50.638, -76.723, 102.211 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24", "电机与大臂外壳连接件3-1:face#14" ], "physical_interface_id": "physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件3_1_face_14" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -74.223, 60.650000000000006 ], "interface_bbox_mm": [ -132.599, -76.723, 20.25, -64.298, -71.723, 88.551 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" } ] }