{ "schema": "component_image_evidence_v1", "component_id": "component_40", "selection_policy": "Post-functional-group part-level checking uses only all-face highlight images generated under functional_group_evidence//all_face_highlights. Initial extraction images and part_check reused images are excluded.", "target_part_image_plan": { "excluded": true, "reason": "Initial extraction or direct part image plans are not allowed in the post-functional-group part-level checking stage." }, "target_part_check_evidence": { "component_id": "component_40", "instance_name": "小臂外壳1-1", "display_name": "小臂外壳1-1 (小臂外壳1)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_40", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_40\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_40/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_5", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#1", "小臂外壳1-1:face#2", "小臂外壳1-1:face#3", "小臂外壳1-1:face#4" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 2.75, "diameter_mm": 5.5, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -98.449, -117.223, 66.4 ], [ -86.449, -117.223, 54.4 ], [ -98.449, -117.223, 42.4 ], [ -110.449, -117.223, 54.4 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#45", "小臂外壳1-1:face#12", "电机和连接臂连接件-1:face#3", "小臂外壳1-1:face#41", "小臂外壳1-1:face#39", "小臂外壳1-1:face#43" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -117.223, "pattern_center_mm": [ -98.449, -117.223, 54.4 ], "pattern_radius_mm": 12, "spacing_mm": 16.971 } }, { "Id": "hole_group_20", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#7", "小臂外壳1-1:face#8" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3.1, "diameter_mm": 6.2, "axis": [ 0.707, -0.707, -0 ], "center_points_mm": [ [ -63.919, -103.246, 119.411 ], [ -132.972, -34.194, 119.39 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#22", "小臂外壳1-1:face#20" ], "member_count": 2, "pattern_type": "same_axis_same_diameter_hole_group", "grouping_basis": "fallback same component, axis direction, and diameter", "pattern_plane_normal": [ 0.707, -0.707, -0 ], "pattern_center_mm": [ -98.446, -68.72, 119.4 ], "spacing_mm": 97.655 } }, { "Id": "hole_group_22", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#9", "小臂外壳1-1:face#10" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ 0.707, 0.707, -0 ], "center_points_mm": [ [ -132.983, -103.252, 119.391 ], [ -63.921, -34.189, 119.41 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#18", "小臂外壳1-1:face#17" ], "member_count": 2, "pattern_type": "same_axis_same_diameter_hole_group", "grouping_basis": "fallback same component, axis direction, and diameter", "pattern_plane_normal": [ 0.707, 0.707, -0 ], "pattern_center_mm": [ -98.452, -68.72, 119.4 ], "spacing_mm": 97.669 } }, { "Id": "hole_group_25", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#16", "小臂外壳1-1:face#19", "小臂外壳1-1:face#21", "小臂外壳1-1:face#23" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 7, "diameter_mm": 14, "axis": [ 0.707, 0.707, -0 ], "center_points_mm": [ [ -60.237, -30.498, 119.422 ], [ -136.66, -106.949, 119.422 ], [ -136.674, -30.512, 119.422 ], [ -60.224, -106.935, 119.422 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#17", "小臂外壳1-1:face#18", "小臂外壳1-1:face#20", "小臂外壳1-1:face#22" ], "member_count": 4, "pattern_type": "radial_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ 0, 0, 1 ], "pattern_plane_t_mm": 119.422, "pattern_center_mm": [ -98.449, -68.724, 119.422 ], "pattern_radius_mm": 54.049, "spacing_mm": 76.437 } }, { "Id": "hole_group_34", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#26", "小臂外壳1-1:face#27", "小臂外壳1-1:face#28", "小臂外壳1-1:face#29" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ 0, -1, 0 ], "center_points_mm": [ [ -98.449, -19.824, 44.4 ], [ -98.449, -19.824, 64.4 ], [ -108.449, -19.824, 54.4 ], [ -88.449, -19.824, 54.4 ] ], "entry_face_candidate_refs": [ "轴承与连接臂连接件-1:face#6", "小臂外壳1-1:face#11", "小臂外壳1-1:face#37", "小臂外壳1-1:face#33", "小臂外壳1-1:face#35", "小臂外壳1-1:face#31" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -19.824, "pattern_center_mm": [ -98.449, -19.824, 54.4 ], "pattern_radius_mm": 10, "spacing_mm": 14.142 } }, { "Id": "hole_group_37", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#30", "小臂外壳1-1:face#32", "小臂外壳1-1:face#34", "小臂外壳1-1:face#36" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 6.5, "diameter_mm": 13, "axis": [ 0, -1, 0 ], "center_points_mm": [ [ -88.782, -15.04, 54.4 ], [ -108.116, -15.04, 54.4 ], [ -98.449, -14.824, 64.4 ], [ -98.449, -14.824, 44.4 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#31", "小臂外壳1-1:face#37", "小臂外壳1-1:face#35", "小臂外壳1-1:face#33" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -14.932, "pattern_center_mm": [ -98.449, -14.932, 54.4 ], "pattern_radius_mm": 9.834, "spacing_mm": 13.91 } }, { "Id": "hole_group_41", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#38", "小臂外壳1-1:face#40", "小臂外壳1-1:face#42", "小臂外壳1-1:face#44" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 5.5, "diameter_mm": 11, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -98.449, -122.223, 42.4 ], [ -86.449, -122.106, 54.4 ], [ -110.449, -122.099, 54.4 ], [ -98.449, -122.223, 66.4 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#39", "小臂外壳1-1:face#41", "小臂外壳1-1:face#43", "小臂外壳1-1:face#45" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -122.163, "pattern_center_mm": [ -98.449, -122.163, 54.4 ], "pattern_radius_mm": 12, "spacing_mm": 16.971 } }, { "Id": "cylindrical_surface_group_1", "Type": "cylindrical_surface_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#6" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 55, "diameter_mm": 110, "axis": [ -0, -0, -1 ], "axis_point_mm": [ -98.449, -68.724, 149.4 ], "total_area_mm2": 15423.12, "member_count": 1 } }, { "Id": "cylindrical_surface_group_5", "Type": "cylindrical_surface_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#25" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 45, "diameter_mm": 90, "axis": [ 0, 0, 1 ], "axis_point_mm": [ -98.449, -68.724, 107.4 ], "total_area_mm2": 5539.332, "member_count": 1 } }, { "Id": "cylindrical_surface_group_22", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#13", "小臂外壳1-1:face#14" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 37, "diameter_mm": 74, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, 5.664, 66.4 ], "total_area_mm2": 948.876, "member_count": 2 } }, { "Id": "planar_surface_candidate_1", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#12" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 4634.436, "normal": [ -0, 1, -0 ], "center_mm": [ -98.449, -113.723, 69.4 ], "bbox_mm": [ -130.072, -113.726, 29.4, -66.826, -113.721, 109.4 ] } }, { "Id": "planar_surface_candidate_2", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#11" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 4616.372, "normal": [ 0, -1, 0 ], "center_mm": [ -98.449, -23.724, 69.4 ], "bbox_mm": [ -130.072, -23.727, 29.4, -66.826, -23.721, 109.4 ] } }, { "Id": "planar_surface_candidate_4", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#24" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 3141.593, "normal": [ 0, 0, 1 ], "center_mm": [ -98.449, -68.724, 129.4 ], "bbox_mm": [ -153.449, -123.724, 129.4, -43.449, -13.724, 129.4 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -98.449, -117.223, 66.4 ], "BBoxMm": [ -101.199, -120.723, 63.65, -95.699, -113.723, 69.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -126.318, 66.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 2, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -86.449, -117.223, 54.4 ], "BBoxMm": [ -89.199, -120.723, 51.65, -83.699, -113.723, 57.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -86.449, -126.318, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -98.449, -117.223, 42.4 ], "BBoxMm": [ -101.199, -120.723, 39.65, -95.699, -113.723, 45.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -126.318, 42.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 4, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -110.449, -117.223, 54.4 ], "BBoxMm": [ -113.199, -120.723, 51.65, -107.699, -113.723, 57.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -110.449, -126.318, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 5, "FaceKind": "plane", "AreaMm2": 1140.821, "CenterMm": [ -70.86, -68.724, 109.4 ], "BBoxMm": [ -98.271, -113.723, 109.4, -43.449, -23.724, 109.4 ], "Normal": [ -0, -0, -1 ], "RootPointMm": [ -98.449, -68.724, 109.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 6, "FaceKind": "cylinder", "AreaMm2": 15423.12, "CenterMm": [ -98.449, -68.724, 79.4 ], "BBoxMm": [ -153.449, -123.724, 29.4, -43.449, -13.724, 129.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.724, 149.4 ], "Axis": [ -0, -0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 7, "FaceKind": "cylinder", "AreaMm2": 156.864, "CenterMm": [ -63.919, -103.246, 119.411 ], "BBoxMm": [ -69.058, -108.392, 116.146, -58.78, -98.1, 122.676 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -161.571, -5.601, 119.4 ], "Axis": [ 0.707, -0.707, -0 ], "RadiusMm": 3.1, "DiameterMm": 6.2, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 8, "FaceKind": "cylinder", "AreaMm2": 156.86, "CenterMm": [ -132.972, -34.194, 119.39 ], "BBoxMm": [ -138.118, -39.333, 116.125, -127.826, -29.055, 122.655 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -161.571, -5.601, 119.4 ], "Axis": [ 0.707, -0.707, -0 ], "RadiusMm": 3.1, "DiameterMm": 6.2, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 9, "FaceKind": "cylinder", "AreaMm2": 151.736, "CenterMm": [ -132.983, -103.252, 119.391 ], "BBoxMm": [ -138.047, -108.322, 116.231, -127.92, -98.182, 122.55 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -154.175, -124.45, 119.4 ], "Axis": [ 0.707, 0.707, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 10, "FaceKind": "cylinder", "AreaMm2": 151.74, "CenterMm": [ -63.921, -34.189, 119.41 ], "BBoxMm": [ -68.991, -39.252, 116.251, -58.851, -29.126, 122.57 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -154.175, -124.45, 119.4 ], "Axis": [ 0.707, 0.707, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 11, "FaceKind": "plane", "AreaMm2": 4616.372, "CenterMm": [ -98.449, -23.724, 69.4 ], "BBoxMm": [ -130.072, -23.727, 29.4, -66.826, -23.721, 109.4 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -23.724, 66.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 12, "FaceKind": "plane", "AreaMm2": 4634.436, "CenterMm": [ -98.449, -113.723, 69.4 ], "BBoxMm": [ -130.072, -113.726, 29.4, -66.826, -113.721, 109.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -113.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 13, "FaceKind": "cylinder", "AreaMm2": 474.438, "CenterMm": [ -98.449, -20.089, 39.661 ], "BBoxMm": [ -130.072, -26.454, 29.4, -66.826, -13.724, 49.922 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, 5.664, 66.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 37, "DiameterMm": 74, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 14, "FaceKind": "cylinder", "AreaMm2": 474.438, "CenterMm": [ -98.449, -117.358, 39.661 ], "BBoxMm": [ -130.072, -123.724, 29.4, -66.826, -110.993, 49.922 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, 5.664, 66.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 37, "DiameterMm": 74, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 15, "FaceKind": "plane", "AreaMm2": 1140.821, "CenterMm": [ -126.038, -68.724, 109.4 ], "BBoxMm": [ -153.449, -113.723, 109.4, -98.627, -23.724, 109.4 ], "Normal": [ -0, -0, -1 ], "RootPointMm": [ -98.449, -68.724, 109.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 16, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -60.237, -30.498, 119.422 ], "BBoxMm": [ -65.922, -36.197, 112.045, -54.553, -24.8, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -60.972, -31.247, 119.4 ], "Axis": [ 0.707, 0.707, -0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 17, "FaceKind": "plane", "AreaMm2": 125.664, "CenterMm": [ -60.972, -31.247, 119.4 ], "BBoxMm": [ -65.922, -36.197, 112.4, -56.022, -26.297, 126.4 ], "Normal": [ 0.707, 0.707, -0 ], "RootPointMm": [ -60.972, -31.247, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 18, "FaceKind": "plane", "AreaMm2": 125.664, "CenterMm": [ -135.925, -106.2, 119.4 ], "BBoxMm": [ -140.875, -111.15, 112.4, -130.976, -101.25, 126.4 ], "Normal": [ -0.707, -0.707, 0 ], "RootPointMm": [ -135.925, -106.2, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 19, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -136.66, -106.949, 119.422 ], "BBoxMm": [ -142.345, -112.647, 112.045, -130.976, -101.25, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -135.925, -106.2, 119.4 ], "Axis": [ -0.707, -0.707, 0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 20, "FaceKind": "plane", "AreaMm2": 123.747, "CenterMm": [ -135.925, -31.247, 119.4 ], "BBoxMm": [ -140.875, -36.197, 112.4, -130.976, -26.297, 126.4 ], "Normal": [ -0.707, 0.707, 0 ], "RootPointMm": [ -135.925, -31.247, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 21, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -136.674, -30.512, 119.422 ], "BBoxMm": [ -142.372, -36.197, 112.045, -130.976, -24.828, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -135.925, -31.247, 119.4 ], "Axis": [ -0.707, 0.707, 0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 22, "FaceKind": "plane", "AreaMm2": 123.747, "CenterMm": [ -60.972, -106.2, 119.4 ], "BBoxMm": [ -65.922, -111.15, 112.4, -56.022, -101.25, 126.4 ], "Normal": [ 0.707, -0.707, -0 ], "RootPointMm": [ -60.972, -106.2, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 23, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -60.224, -106.935, 119.422 ], "BBoxMm": [ -65.922, -112.619, 112.045, -54.525, -101.25, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -60.972, -106.2, 119.4 ], "Axis": [ 0.707, -0.707, -0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 24, "FaceKind": "plane", "AreaMm2": 3141.593, "CenterMm": [ -98.449, -68.724, 129.4 ], "BBoxMm": [ -153.449, -123.724, 129.4, -43.449, -13.724, 129.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.724, 129.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 25, "FaceKind": "cylinder", "AreaMm2": 5539.332, "CenterMm": [ -98.449, -68.724, 118.399 ], "BBoxMm": [ -143.449, -113.726, 107.398, -53.449, -23.721, 129.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.724, 107.4 ], "Axis": [ 0, 0, 1 ], "RadiusMm": 45, "DiameterMm": 90, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 26, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -98.449, -19.824, 44.4 ], "BBoxMm": [ -101.449, -23.724, 41.4, -95.449, -15.924, 47.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -13.724, 44.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 27, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -98.449, -19.824, 64.4 ], "BBoxMm": [ -101.449, -23.724, 61.4, -95.449, -15.924, 67.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -13.724, 64.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 28, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -108.449, -19.824, 54.4 ], "BBoxMm": [ -111.449, -23.724, 51.4, -105.449, -15.924, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -108.449, -13.724, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 29, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -88.449, -19.824, 54.4 ], "BBoxMm": [ -91.449, -23.724, 51.4, -85.449, -15.924, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -88.449, -13.724, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 30, "FaceKind": "cylinder", "AreaMm2": 45.827, "CenterMm": [ -88.782, -15.04, 54.4 ], "BBoxMm": [ -94.949, -16.357, 47.9, -82.615, -13.724, 60.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -88.449, -11.924, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 31, "FaceKind": "plane", "AreaMm2": 99.063, "CenterMm": [ -88.998, -15.924, 54.4 ], "BBoxMm": [ -94.949, -15.924, 47.9, -83.048, -15.924, 60.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -88.449, -15.924, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 32, "FaceKind": "cylinder", "AreaMm2": 45.827, "CenterMm": [ -108.116, -15.04, 54.4 ], "BBoxMm": [ -114.283, -16.357, 47.9, -101.949, -13.724, 60.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -108.449, -11.924, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 33, "FaceKind": "plane", "AreaMm2": 99.063, "CenterMm": [ -107.899, -15.924, 54.4 ], "BBoxMm": [ -113.85, -15.924, 47.9, -101.949, -15.924, 60.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -108.449, -15.924, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 34, "FaceKind": "cylinder", "AreaMm2": 82.001, "CenterMm": [ -98.449, -14.824, 64.4 ], "BBoxMm": [ -104.949, -15.924, 57.9, -91.949, -13.724, 70.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -11.924, 64.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 35, "FaceKind": "plane", "AreaMm2": 104.458, "CenterMm": [ -98.449, -15.924, 64.4 ], "BBoxMm": [ -104.949, -15.924, 57.9, -91.949, -15.924, 70.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -15.924, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 36, "FaceKind": "cylinder", "AreaMm2": 82.001, "CenterMm": [ -98.449, -14.824, 44.4 ], "BBoxMm": [ -104.949, -15.924, 37.9, -91.949, -13.724, 50.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -11.924, 44.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 37, "FaceKind": "plane", "AreaMm2": 104.458, "CenterMm": [ -98.449, -15.924, 44.4 ], "BBoxMm": [ -104.949, -15.924, 37.9, -91.949, -15.924, 50.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -15.924, 44.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 38, "FaceKind": "cylinder", "AreaMm2": 98.924, "CenterMm": [ -98.449, -122.223, 42.4 ], "BBoxMm": [ -103.949, -123.724, 36.9, -92.949, -120.723, 47.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -124.723, 42.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 39, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -98.449, -120.723, 42.4 ], "BBoxMm": [ -103.949, -120.723, 36.9, -92.949, -120.723, 47.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -120.723, 42.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 40, "FaceKind": "cylinder", "AreaMm2": 52.77, "CenterMm": [ -86.449, -122.106, 54.4 ], "BBoxMm": [ -91.949, -123.68, 48.9, -80.949, -120.531, 59.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -86.449, -124.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 41, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -86.449, -120.723, 54.4 ], "BBoxMm": [ -91.949, -120.723, 48.9, -80.949, -120.723, 59.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -86.449, -120.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 42, "FaceKind": "cylinder", "AreaMm2": 52.769, "CenterMm": [ -110.449, -122.099, 54.4 ], "BBoxMm": [ -115.949, -123.674, 48.9, -104.949, -120.525, 59.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -110.449, -124.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 43, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -110.449, -120.723, 54.4 ], "BBoxMm": [ -115.949, -120.723, 48.9, -104.949, -120.723, 59.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -110.449, -120.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 44, "FaceKind": "cylinder", "AreaMm2": 98.924, "CenterMm": [ -98.449, -122.223, 66.4 ], "BBoxMm": [ -103.949, -123.724, 60.9, -92.949, -120.723, 71.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -124.723, 66.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 45, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -98.449, -120.723, 66.4 ], "BBoxMm": [ -103.949, -120.723, 60.9, -92.949, -120.723, 71.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -120.723, 66.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" } ], "counts": { "features": 13, "faces": 45, "image_views": 1 }, "image_policy": "All initial extraction images and part_check reused images are excluded from the post-functional-group part-level checking stage. Use available_target_images with image_kind=functional_group_all_face_highlight only." }, "target_context_image_plans": [], "available_target_images": [ { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_40/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_40_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_40", "highlight_component_id": "component_40", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_40\\best_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_40/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_40_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_40", "highlight_component_id": "component_40", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_40\\best_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" } ] }