{ "schema": "component_part_check_extractions_manifest_v1", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\section_brep_report.json", "extraction_policy": "No second B-rep extraction is performed here. Component part-check evidence is reused and filtered from the initial assembly SectionBrepExtractor report.", "image_path_policy": "Part-check evidence keeps a separate logical manifest under part_check_extractions/, but image files are reused from the initial extraction output instead of being regenerated.", "brep_policy": "Reuse assembly-derived component B-rep faces/features/images for part-level checks; do not rerun SectionBrepExtractor per component and do not replace transformed assembly contact/mate facts.", "component_count": 5, "components": [ { "component_id": "component_41", "instance_name": "小臂外壳1-1", "display_name": "小臂外壳1-1 (小臂外壳1)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_41", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_41\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_41/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_1", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#1", "小臂外壳1-1:face#2", "小臂外壳1-1:face#3", "小臂外壳1-1:face#4" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 2.75, "diameter_mm": 5.5, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -98.449, -117.223, 66.4 ], [ -86.449, -117.223, 54.4 ], [ -98.449, -117.223, 42.4 ], [ -110.449, -117.223, 54.4 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#45", "小臂外壳1-1:face#12", "电机和连接臂连接件-1:face#3", "小臂外壳1-1:face#41", "小臂外壳1-1:face#39", "小臂外壳1-1:face#43" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -117.223, "pattern_center_mm": [ -98.449, -117.223, 54.4 ], "pattern_radius_mm": 12, "spacing_mm": 16.971 } }, { "Id": "hole_group_6", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#7", "小臂外壳1-1:face#8" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3.1, "diameter_mm": 6.2, "axis": [ 0.707, -0.707, -0 ], "center_points_mm": [ [ -63.919, -103.246, 119.411 ], [ -132.972, -34.194, 119.39 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#22", "小臂外壳1-1:face#20" ], "member_count": 2, "pattern_type": "same_axis_same_diameter_hole_group", "grouping_basis": "fallback same component, axis direction, and diameter", "pattern_plane_normal": [ 0.707, -0.707, -0 ], "pattern_center_mm": [ -98.446, -68.72, 119.4 ], "spacing_mm": 97.655 } }, { "Id": "hole_group_7", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#9", "小臂外壳1-1:face#10" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ 0.707, 0.707, -0 ], "center_points_mm": [ [ -132.983, -103.252, 119.391 ], [ -63.921, -34.189, 119.41 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#18", "小臂外壳1-1:face#17" ], "member_count": 2, "pattern_type": "same_axis_same_diameter_hole_group", "grouping_basis": "fallback same component, axis direction, and diameter", "pattern_plane_normal": [ 0.707, 0.707, -0 ], "pattern_center_mm": [ -98.452, -68.72, 119.4 ], "spacing_mm": 97.669 } }, { "Id": "hole_group_9", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#16", "小臂外壳1-1:face#19", "小臂外壳1-1:face#21", "小臂外壳1-1:face#23" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 7, "diameter_mm": 14, "axis": [ 0.707, 0.707, -0 ], "center_points_mm": [ [ -60.237, -30.498, 119.422 ], [ -136.66, -106.949, 119.422 ], [ -136.674, -30.512, 119.422 ], [ -60.224, -106.935, 119.422 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#17", "小臂外壳1-1:face#18", "小臂外壳1-1:face#20", "小臂外壳1-1:face#22" ], "member_count": 4, "pattern_type": "radial_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ 0, 0, 1 ], "pattern_plane_t_mm": 119.422, "pattern_center_mm": [ -98.449, -68.724, 119.422 ], "pattern_radius_mm": 54.049, "spacing_mm": 76.437 } }, { "Id": "hole_group_12", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#26", "小臂外壳1-1:face#27", "小臂外壳1-1:face#28", "小臂外壳1-1:face#29" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ 0, -1, 0 ], "center_points_mm": [ [ -98.449, -19.824, 44.4 ], [ -98.449, -19.824, 64.4 ], [ -108.449, -19.824, 54.4 ], [ -88.449, -19.824, 54.4 ] ], "entry_face_candidate_refs": [ "轴承与连接臂连接件-1:face#6", "小臂外壳1-1:face#11", "小臂外壳1-1:face#37", "小臂外壳1-1:face#33", "小臂外壳1-1:face#35", "小臂外壳1-1:face#31" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -19.824, "pattern_center_mm": [ -98.449, -19.824, 54.4 ], "pattern_radius_mm": 10, "spacing_mm": 14.142 } }, { "Id": "hole_group_13", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#30", "小臂外壳1-1:face#32", "小臂外壳1-1:face#34", "小臂外壳1-1:face#36" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 6.5, "diameter_mm": 13, "axis": [ 0, -1, 0 ], "center_points_mm": [ [ -88.782, -15.04, 54.4 ], [ -108.116, -15.04, 54.4 ], [ -98.449, -14.824, 64.4 ], [ -98.449, -14.824, 44.4 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#31", "小臂外壳1-1:face#37", "小臂外壳1-1:face#35", "小臂外壳1-1:face#33" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -14.932, "pattern_center_mm": [ -98.449, -14.932, 54.4 ], "pattern_radius_mm": 9.834, "spacing_mm": 13.91 } }, { "Id": "hole_group_15", "Type": "hole_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#38", "小臂外壳1-1:face#40", "小臂外壳1-1:face#42", "小臂外壳1-1:face#44" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 5.5, "diameter_mm": 11, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -98.449, -122.223, 42.4 ], [ -86.449, -122.106, 54.4 ], [ -110.449, -122.099, 54.4 ], [ -98.449, -122.223, 66.4 ] ], "entry_face_candidate_refs": [ "小臂外壳1-1:face#39", "小臂外壳1-1:face#41", "小臂外壳1-1:face#43", "小臂外壳1-1:face#45" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -122.163, "pattern_center_mm": [ -98.449, -122.163, 54.4 ], "pattern_radius_mm": 12, "spacing_mm": 16.971 } }, { "Id": "cylindrical_surface_group_1", "Type": "cylindrical_surface_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#6" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 55, "diameter_mm": 110, "axis": [ -0, -0, -1 ], "axis_point_mm": [ -98.449, -68.724, 149.4 ], "total_area_mm2": 15423.12, "member_count": 1 } }, { "Id": "cylindrical_surface_group_5", "Type": "cylindrical_surface_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#25" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 45, "diameter_mm": 90, "axis": [ 0, 0, 1 ], "axis_point_mm": [ -98.449, -68.724, 107.4 ], "total_area_mm2": 5539.332, "member_count": 1 } }, { "Id": "cylindrical_surface_group_13", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#13", "小臂外壳1-1:face#14" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 37, "diameter_mm": 74, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, 5.664, 66.4 ], "total_area_mm2": 948.876, "member_count": 2 } }, { "Id": "planar_surface_candidate_1", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#12" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 4634.436, "normal": [ -0, 1, -0 ], "center_mm": [ -98.449, -113.723, 69.4 ], "bbox_mm": [ -130.072, -113.726, 29.4, -66.826, -113.721, 109.4 ] } }, { "Id": "planar_surface_candidate_2", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#11" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 4616.372, "normal": [ 0, -1, 0 ], "center_mm": [ -98.449, -23.724, 69.4 ], "bbox_mm": [ -130.072, -23.727, 29.4, -66.826, -23.721, 109.4 ] } }, { "Id": "planar_surface_candidate_4", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "FaceRefs": [ "小臂外壳1-1:face#24" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 3141.593, "normal": [ 0, 0, 1 ], "center_mm": [ -98.449, -68.724, 129.4 ], "bbox_mm": [ -153.449, -123.724, 129.4, -43.449, -13.724, 129.4 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -98.449, -117.223, 66.4 ], "BBoxMm": [ -101.199, -120.723, 63.65, -95.699, -113.723, 69.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -126.318, 66.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 2, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -86.449, -117.223, 54.4 ], "BBoxMm": [ -89.199, -120.723, 51.65, -83.699, -113.723, 57.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -86.449, -126.318, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -98.449, -117.223, 42.4 ], "BBoxMm": [ -101.199, -120.723, 39.65, -95.699, -113.723, 45.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -126.318, 42.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 4, "FaceKind": "cylinder", "AreaMm2": 120.951, "CenterMm": [ -110.449, -117.223, 54.4 ], "BBoxMm": [ -113.199, -120.723, 51.65, -107.699, -113.723, 57.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -110.449, -126.318, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 5, "FaceKind": "plane", "AreaMm2": 1140.821, "CenterMm": [ -70.86, -68.724, 109.4 ], "BBoxMm": [ -98.271, -113.723, 109.4, -43.449, -23.724, 109.4 ], "Normal": [ -0, -0, -1 ], "RootPointMm": [ -98.449, -68.724, 109.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 6, "FaceKind": "cylinder", "AreaMm2": 15423.12, "CenterMm": [ -98.449, -68.724, 79.4 ], "BBoxMm": [ -153.449, -123.724, 29.4, -43.449, -13.724, 129.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.724, 149.4 ], "Axis": [ -0, -0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 7, "FaceKind": "cylinder", "AreaMm2": 156.864, "CenterMm": [ -63.919, -103.246, 119.411 ], "BBoxMm": [ -69.058, -108.392, 116.146, -58.78, -98.1, 122.676 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -161.571, -5.601, 119.4 ], "Axis": [ 0.707, -0.707, -0 ], "RadiusMm": 3.1, "DiameterMm": 6.2, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 8, "FaceKind": "cylinder", "AreaMm2": 156.86, "CenterMm": [ -132.972, -34.194, 119.39 ], "BBoxMm": [ -138.118, -39.333, 116.125, -127.826, -29.055, 122.655 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -161.571, -5.601, 119.4 ], "Axis": [ 0.707, -0.707, -0 ], "RadiusMm": 3.1, "DiameterMm": 6.2, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 9, "FaceKind": "cylinder", "AreaMm2": 151.736, "CenterMm": [ -132.983, -103.252, 119.391 ], "BBoxMm": [ -138.047, -108.322, 116.231, -127.92, -98.182, 122.55 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -154.175, -124.45, 119.4 ], "Axis": [ 0.707, 0.707, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 10, "FaceKind": "cylinder", "AreaMm2": 151.74, "CenterMm": [ -63.921, -34.189, 119.41 ], "BBoxMm": [ -68.991, -39.252, 116.251, -58.851, -29.126, 122.57 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -154.175, -124.45, 119.4 ], "Axis": [ 0.707, 0.707, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 11, "FaceKind": "plane", "AreaMm2": 4616.372, "CenterMm": [ -98.449, -23.724, 69.4 ], "BBoxMm": [ -130.072, -23.727, 29.4, -66.826, -23.721, 109.4 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -23.724, 66.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 12, "FaceKind": "plane", "AreaMm2": 4634.436, "CenterMm": [ -98.449, -113.723, 69.4 ], "BBoxMm": [ -130.072, -113.726, 29.4, -66.826, -113.721, 109.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -113.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 13, "FaceKind": "cylinder", "AreaMm2": 474.438, "CenterMm": [ -98.449, -20.089, 39.661 ], "BBoxMm": [ -130.072, -26.454, 29.4, -66.826, -13.724, 49.922 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, 5.664, 66.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 37, "DiameterMm": 74, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 14, "FaceKind": "cylinder", "AreaMm2": 474.438, "CenterMm": [ -98.449, -117.358, 39.661 ], "BBoxMm": [ -130.072, -123.724, 29.4, -66.826, -110.993, 49.922 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, 5.664, 66.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 37, "DiameterMm": 74, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 15, "FaceKind": "plane", "AreaMm2": 1140.821, "CenterMm": [ -126.038, -68.724, 109.4 ], "BBoxMm": [ -153.449, -113.723, 109.4, -98.627, -23.724, 109.4 ], "Normal": [ -0, -0, -1 ], "RootPointMm": [ -98.449, -68.724, 109.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 16, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -60.237, -30.498, 119.422 ], "BBoxMm": [ -65.922, -36.197, 112.045, -54.553, -24.8, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -60.972, -31.247, 119.4 ], "Axis": [ 0.707, 0.707, -0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 17, "FaceKind": "plane", "AreaMm2": 125.664, "CenterMm": [ -60.972, -31.247, 119.4 ], "BBoxMm": [ -65.922, -36.197, 112.4, -56.022, -26.297, 126.4 ], "Normal": [ 0.707, 0.707, -0 ], "RootPointMm": [ -60.972, -31.247, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 18, "FaceKind": "plane", "AreaMm2": 125.664, "CenterMm": [ -135.925, -106.2, 119.4 ], "BBoxMm": [ -140.875, -111.15, 112.4, -130.976, -101.25, 126.4 ], "Normal": [ -0.707, -0.707, 0 ], "RootPointMm": [ -135.925, -106.2, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 19, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -136.66, -106.949, 119.422 ], "BBoxMm": [ -142.345, -112.647, 112.045, -130.976, -101.25, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -135.925, -106.2, 119.4 ], "Axis": [ -0.707, -0.707, 0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 20, "FaceKind": "plane", "AreaMm2": 123.747, "CenterMm": [ -135.925, -31.247, 119.4 ], "BBoxMm": [ -140.875, -36.197, 112.4, -130.976, -26.297, 126.4 ], "Normal": [ -0.707, 0.707, 0 ], "RootPointMm": [ -135.925, -31.247, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 21, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -136.674, -30.512, 119.422 ], "BBoxMm": [ -142.372, -36.197, 112.045, -130.976, -24.828, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -135.925, -31.247, 119.4 ], "Axis": [ -0.707, 0.707, 0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 22, "FaceKind": "plane", "AreaMm2": 123.747, "CenterMm": [ -60.972, -106.2, 119.4 ], "BBoxMm": [ -65.922, -111.15, 112.4, -56.022, -101.25, 126.4 ], "Normal": [ 0.707, -0.707, -0 ], "RootPointMm": [ -60.972, -106.2, 119.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 23, "FaceKind": "cylinder", "AreaMm2": 78.136, "CenterMm": [ -60.224, -106.935, 119.422 ], "BBoxMm": [ -65.922, -112.619, 112.045, -54.525, -101.25, 126.799 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -60.972, -106.2, 119.4 ], "Axis": [ 0.707, -0.707, -0 ], "RadiusMm": 7, "DiameterMm": 14, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 24, "FaceKind": "plane", "AreaMm2": 3141.593, "CenterMm": [ -98.449, -68.724, 129.4 ], "BBoxMm": [ -153.449, -123.724, 129.4, -43.449, -13.724, 129.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.724, 129.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 25, "FaceKind": "cylinder", "AreaMm2": 5539.332, "CenterMm": [ -98.449, -68.724, 118.399 ], "BBoxMm": [ -143.449, -113.726, 107.398, -53.449, -23.721, 129.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.724, 107.4 ], "Axis": [ 0, 0, 1 ], "RadiusMm": 45, "DiameterMm": 90, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 26, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -98.449, -19.824, 44.4 ], "BBoxMm": [ -101.449, -23.724, 41.4, -95.449, -15.924, 47.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -13.724, 44.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 27, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -98.449, -19.824, 64.4 ], "BBoxMm": [ -101.449, -23.724, 61.4, -95.449, -15.924, 67.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -13.724, 64.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 28, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -108.449, -19.824, 54.4 ], "BBoxMm": [ -111.449, -23.724, 51.4, -105.449, -15.924, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -108.449, -13.724, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 29, "FaceKind": "cylinder", "AreaMm2": 147.027, "CenterMm": [ -88.449, -19.824, 54.4 ], "BBoxMm": [ -91.449, -23.724, 51.4, -85.449, -15.924, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -88.449, -13.724, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 30, "FaceKind": "cylinder", "AreaMm2": 45.827, "CenterMm": [ -88.782, -15.04, 54.4 ], "BBoxMm": [ -94.949, -16.357, 47.9, -82.615, -13.724, 60.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -88.449, -11.924, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 31, "FaceKind": "plane", "AreaMm2": 99.063, "CenterMm": [ -88.998, -15.924, 54.4 ], "BBoxMm": [ -94.949, -15.924, 47.9, -83.048, -15.924, 60.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -88.449, -15.924, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 32, "FaceKind": "cylinder", "AreaMm2": 45.827, "CenterMm": [ -108.116, -15.04, 54.4 ], "BBoxMm": [ -114.283, -16.357, 47.9, -101.949, -13.724, 60.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -108.449, -11.924, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 33, "FaceKind": "plane", "AreaMm2": 99.063, "CenterMm": [ -107.899, -15.924, 54.4 ], "BBoxMm": [ -113.85, -15.924, 47.9, -101.949, -15.924, 60.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -108.449, -15.924, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 34, "FaceKind": "cylinder", "AreaMm2": 82.001, "CenterMm": [ -98.449, -14.824, 64.4 ], "BBoxMm": [ -104.949, -15.924, 57.9, -91.949, -13.724, 70.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -11.924, 64.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 35, "FaceKind": "plane", "AreaMm2": 104.458, "CenterMm": [ -98.449, -15.924, 64.4 ], "BBoxMm": [ -104.949, -15.924, 57.9, -91.949, -15.924, 70.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -15.924, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 36, "FaceKind": "cylinder", "AreaMm2": 82.001, "CenterMm": [ -98.449, -14.824, 44.4 ], "BBoxMm": [ -104.949, -15.924, 37.9, -91.949, -13.724, 50.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -11.924, 44.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 6.5, "DiameterMm": 13, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 37, "FaceKind": "plane", "AreaMm2": 104.458, "CenterMm": [ -98.449, -15.924, 44.4 ], "BBoxMm": [ -104.949, -15.924, 37.9, -91.949, -15.924, 50.9 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -15.924, 44.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 38, "FaceKind": "cylinder", "AreaMm2": 98.924, "CenterMm": [ -98.449, -122.223, 42.4 ], "BBoxMm": [ -103.949, -123.724, 36.9, -92.949, -120.723, 47.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -124.723, 42.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 39, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -98.449, -120.723, 42.4 ], "BBoxMm": [ -103.949, -120.723, 36.9, -92.949, -120.723, 47.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -120.723, 42.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 40, "FaceKind": "cylinder", "AreaMm2": 52.77, "CenterMm": [ -86.449, -122.106, 54.4 ], "BBoxMm": [ -91.949, -123.68, 48.9, -80.949, -120.531, 59.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -86.449, -124.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 41, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -86.449, -120.723, 54.4 ], "BBoxMm": [ -91.949, -120.723, 48.9, -80.949, -120.723, 59.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -86.449, -120.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 42, "FaceKind": "cylinder", "AreaMm2": 52.769, "CenterMm": [ -110.449, -122.099, 54.4 ], "BBoxMm": [ -115.949, -123.674, 48.9, -104.949, -120.525, 59.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -110.449, -124.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 43, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -110.449, -120.723, 54.4 ], "BBoxMm": [ -115.949, -120.723, 48.9, -104.949, -120.723, 59.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -110.449, -120.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 44, "FaceKind": "cylinder", "AreaMm2": 98.924, "CenterMm": [ -98.449, -122.223, 66.4 ], "BBoxMm": [ -103.949, -123.724, 60.9, -92.949, -120.723, 71.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -124.723, 66.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 5.5, "DiameterMm": 11, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂外壳1-1", "ComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\小臂外壳1.SLDPRT", "ComponentFileName": "小臂外壳1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 45, "FaceKind": "plane", "AreaMm2": 71.275, "CenterMm": [ -98.449, -120.723, 66.4 ], "BBoxMm": [ -103.949, -120.723, 60.9, -92.949, -120.723, 71.9 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -120.723, 66.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" } ], "image_views": [ { "ImageKind": "assembly_component_highlight_view", "RequestedView": "best_oblique", "ViewName": "highlight_component_41_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "assembly_context_highlight_component_41", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 0, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_highlights\\component_41\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with whole component selected using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=False; hidden=0; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:22:51.7935461+08:00", "CompletedAt": "2026-07-09T14:22:54.2382197+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11", "HighlightComponentId": "component_39", "HighlightComponentInstanceName": "轴承与连接臂连接件-1", "HighlightComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_39", "HighlightInterfaceComponentAInstanceName": "轴承与连接臂连接件-1", "HighlightInterfaceComponentADisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "轴承与连接臂连接件-1:face#6", "小臂外壳1-1:face#11" ], "HighlightViewDirectionMm": [ 3.1579677144893343E-16, 1, 0 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:16.2979674+08:00", "CompletedAt": "2026-07-09T14:23:22.016914+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#10" ], "HighlightViewDirectionMm": [ -0.6710598191625188, -0.5882426631256203, 0.45127518033284914 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:57.4562329+08:00", "CompletedAt": "2026-07-09T14:24:17.7016701+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#11" ], "HighlightViewDirectionMm": [ -0.667596648542178, 0.5907243431122633, 0.45316604606902805 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:24:17.7087452+08:00", "CompletedAt": "2026-07-09T14:24:38.1819442+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#12" ], "HighlightViewDirectionMm": [ 0.6710624286032231, 0.5882470291242166, 0.45126560875351135 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:24:38.1875561+08:00", "CompletedAt": "2026-07-09T14:24:58.2996958+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#13" ], "HighlightViewDirectionMm": [ 0.6676033186879543, -0.5907133314376827, 0.45317057377837777 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:24:58.3058393+08:00", "CompletedAt": "2026-07-09T14:25:18.6989401+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#8", "小臂外壳1-1:face#6" ], "HighlightViewDirectionMm": [ -0.9752905205093229, -0.010019730178344293, -0.22069890260671257 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:25:18.7043007+08:00", "CompletedAt": "2026-07-09T14:25:39.9418722+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#11", "小臂外壳1-1:face#6" ], "HighlightViewDirectionMm": [ 0.975290520509323, -0.010019730178344281, -0.2206989026067123 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:25:39.947741+08:00", "CompletedAt": "2026-07-09T14:26:00.0266825+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12", "HighlightComponentId": "component_40", "HighlightComponentInstanceName": "电机和连接臂连接件-1", "HighlightComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_40", "HighlightInterfaceComponentAInstanceName": "电机和连接臂连接件-1", "HighlightInterfaceComponentADisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "电机和连接臂连接件-1:face#3", "小臂外壳1-1:face#12" ], "HighlightViewDirectionMm": [ 3.1580378931091815E-16, -1, 0 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:27:42.4714057+08:00", "CompletedAt": "2026-07-09T14:28:03.2739635+08:00" } ], "counts": { "features": 13, "faces": 45, "image_views": 9 } }, { "component_id": "component_1", "instance_name": "电机与大臂外壳连接件1-1", "display_name": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_1", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_1\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_1/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_3", "Type": "hole_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#2", "电机与大臂外壳连接件1-1:face#3", "电机与大臂外壳连接件1-1:face#27", "电机与大臂外壳连接件1-1:face#28" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ -1, 0, 0 ], "center_points_mm": [ [ -98.449, -115.223, 4.4 ], [ -51.949, -68.723, 4.4 ], [ -144.949, -68.723, 4.4 ], [ -98.449, -22.223, 4.4 ] ], "entry_face_candidate_refs": [ "电机和连接臂连接件-1:face#3", "小臂外壳1-1:face#12", "电机与大臂外壳连接件1-1:face#58", "电机与大臂外壳连接件1-1:face#25", "电机与大臂外壳连接件1-1:face#43", "电机与大臂外壳连接件3-1:face#38", "电机与大臂外壳连接件1-1:face#20", "电机与大臂外壳连接件3-1:face#36" ], "member_count": 4, "pattern_type": "radial_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ 0, 0, 1 ], "pattern_plane_t_mm": 4.4, "pattern_center_mm": [ -98.449, -68.723, 4.4 ], "pattern_radius_mm": 46.5, "spacing_mm": 65.761 } }, { "Id": "hole_group_8", "Type": "hole_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#15", "电机与大臂外壳连接件1-1:face#17" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 4, "diameter_mm": 8, "axis": [ -0, -0, 1 ], "center_points_mm": [ [ -138.449, -68.723, 44.4 ], [ -58.449, -68.723, 44.4 ] ], "entry_face_candidate_refs": [ "轴承与连接臂连接件-1:face#30", "轴承与连接臂连接件-1:face#33", "轴承与连接臂连接件-1:face#19", "轴承与连接臂连接件-1:face#11" ], "member_count": 2, "pattern_type": "coplanar_parallel_hole_pair", "grouping_basis": "same diameter, parallel axes, shared axial parameter plane, and center-parameter distribution", "pattern_plane_normal": [ -0, -0, 1 ], "pattern_plane_t_mm": 44.4, "pattern_center_mm": [ -98.449, -68.723, 44.4 ], "spacing_mm": 80 } }, { "Id": "hole_group_14", "Type": "hole_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#35", "电机与大臂外壳连接件1-1:face#37", "电机与大臂外壳连接件1-1:face#39", "电机与大臂外壳连接件1-1:face#41" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 1.75, "diameter_mm": 3.5, "axis": [ -0, -1, -0 ], "center_points_mm": [ [ -73.855, -74.723, 35.529 ], [ -94.403, -74.723, 23.666 ], [ -117.32, -74.723, 29.807 ], [ -129.184, -74.723, 50.354 ] ], "entry_face_candidate_refs": [ "电机与大臂外壳连接件1-1:face#53", "电机与大臂外壳连接件1-1:face#52", "电机与大臂外壳连接件1-1:face#45", "电机与大臂外壳连接件1-1:face#46" ], "member_count": 4, "pattern_type": "coplanar_parallel_hole_pattern", "grouping_basis": "same diameter, parallel axes, shared axial parameter plane, and center-parameter distribution", "pattern_plane_normal": [ -0, -1, -0 ], "pattern_plane_t_mm": 74.723, "pattern_center_mm": [ -103.69, -74.723, 34.839 ], "spacing_mm": 23.726 } }, { "Id": "cylindrical_surface_group_3", "Type": "cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#8", "电机与大臂外壳连接件1-1:face#11" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 55, "diameter_mm": 110, "axis": [ -0, -0, -1 ], "axis_point_mm": [ -98.449, -68.723, 54.4 ], "total_area_mm2": 7890.17, "member_count": 2 } }, { "Id": "cylindrical_surface_group_4", "Type": "cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#14" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 50, "diameter_mm": 100, "axis": [ -0, -0, 1 ], "axis_point_mm": [ -98.449, -68.723, -5.6 ], "total_area_mm2": 6170.076, "member_count": 1 } }, { "Id": "cylindrical_surface_group_6", "Type": "cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#1" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 40, "diameter_mm": 80, "axis": [ -0, -0, 1 ], "axis_point_mm": [ -98.449, -68.723, -5.6 ], "total_area_mm2": 4711.558, "member_count": 1 } }, { "Id": "cylindrical_surface_group_8", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#31" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 35, "diameter_mm": 70, "axis": [ -0, -1, -0 ], "axis_point_mm": [ -98.449, -76.723, 54.4 ], "total_area_mm2": 3339.392, "member_count": 1 } }, { "Id": "cylindrical_surface_group_11", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#4", "电机与大臂外壳连接件1-1:face#7" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 30, "diameter_mm": 60, "axis": [ -0, 1, -0 ], "axis_point_mm": [ -98.449, -123.723, 54.4 ], "total_area_mm2": 1696.46, "member_count": 2 } }, { "Id": "cylindrical_surface_group_14", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#30" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 32.5, "diameter_mm": 65, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, -25.723, 54.4 ], "total_area_mm2": 816.814, "member_count": 1 } }, { "Id": "cylindrical_surface_group_16", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#33" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 25, "diameter_mm": 50, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, -71.723, 54.4 ], "total_area_mm2": 392.699, "member_count": 1 } }, { "Id": "planar_surface_candidate_3", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#10" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 3343.356, "normal": [ 0, 0, 1 ], "center_mm": [ -98.449, -68.723, 14.4 ], "bbox_mm": [ -138.449, -108.723, 14.4, -58.449, -28.723, 14.4 ] } }, { "Id": "planar_surface_candidate_5", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#13" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 2827.433, "normal": [ 0, 0, -1 ], "center_mm": [ -98.449, -68.723, -5.6 ], "bbox_mm": [ -148.449, -118.723, -5.6, -48.449, -18.723, -5.6 ] } }, { "Id": "planar_surface_candidate_8", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#5" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1389.698, "normal": [ 0, 0, 1 ], "center_mm": [ -58.449, -68.436, 54.4 ], "bbox_mm": [ -73.449, -111.15, 54.4, -43.449, -25.723, 54.4 ] } }, { "Id": "planar_surface_candidate_9", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件1-1:face#6" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1389.698, "normal": [ 0, 0, 1 ], "center_mm": [ -138.449, -68.436, 54.4 ], "bbox_mm": [ -153.449, -111.15, 54.4, -123.449, -25.723, 54.4 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 4711.558, "CenterMm": [ -98.449, -68.723, 4.4 ], "BBoxMm": [ -138.449, -108.723, -5.6, -58.449, -28.723, 14.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, -5.6 ], "Axis": [ -0, -0, 1 ], "RadiusMm": 40, "DiameterMm": 80, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 2, "FaceKind": "cylinder", "AreaMm2": 131.095, "CenterMm": [ -98.449, -115.223, 4.4 ], "BBoxMm": [ -101.449, -118.723, 1.4, -95.449, -111.723, 7.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -14.3, 4.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 131.098, "CenterMm": [ -51.949, -68.723, 4.4 ], "BBoxMm": [ -55.449, -71.723, 1.4, -48.449, -65.723, 7.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -13.716, -68.723, 4.4 ], "Axis": [ -1, 0, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 4, "FaceKind": "cylinder", "AreaMm2": 510.823, "CenterMm": [ -98.449, -69.013, 39.4 ], "BBoxMm": [ -128.449, -71.723, 24.4, -68.449, -66.303, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -123.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 30, "DiameterMm": 60, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 5, "FaceKind": "plane", "AreaMm2": 1389.698, "CenterMm": [ -58.449, -68.436, 54.4 ], "BBoxMm": [ -73.449, -111.15, 54.4, -43.449, -25.723, 54.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 6, "FaceKind": "plane", "AreaMm2": 1389.698, "CenterMm": [ -138.449, -68.436, 54.4 ], "BBoxMm": [ -153.449, -111.15, 54.4, -123.449, -25.723, 54.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 7, "FaceKind": "cylinder", "AreaMm2": 1185.637, "CenterMm": [ -98.449, -40.013, 39.4 ], "BBoxMm": [ -128.449, -46.303, 24.4, -68.449, -33.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -123.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 30, "DiameterMm": 60, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 8, "FaceKind": "cylinder", "AreaMm2": 3945.085, "CenterMm": [ -142.64, -69.178, 34.4 ], "BBoxMm": [ -153.449, -112.634, 14.4, -131.831, -25.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, 54.4 ], "Axis": [ -0, -0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 9, "FaceKind": "plane", "AreaMm2": 504.456, "CenterMm": [ -58.191, -68.723, 14.4 ], "BBoxMm": [ -72.934, -111.723, 14.4, -43.449, -25.723, 14.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.723, 14.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 10, "FaceKind": "plane", "AreaMm2": 3343.356, "CenterMm": [ -98.449, -68.723, 14.4 ], "BBoxMm": [ -138.449, -108.723, 14.4, -58.449, -28.723, 14.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.723, 14.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 11, "FaceKind": "cylinder", "AreaMm2": 3945.085, "CenterMm": [ -54.258, -69.178, 34.4 ], "BBoxMm": [ -65.066, -112.634, 14.4, -43.449, -25.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, 54.4 ], "Axis": [ -0, -0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 12, "FaceKind": "plane", "AreaMm2": 504.456, "CenterMm": [ -138.706, -68.723, 14.4 ], "BBoxMm": [ -153.449, -111.723, 14.4, -123.964, -25.723, 14.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.723, 14.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 13, "FaceKind": "plane", "AreaMm2": 2827.433, "CenterMm": [ -98.449, -68.723, -5.6 ], "BBoxMm": [ -148.449, -118.723, -5.6, -48.449, -18.723, -5.6 ], "Normal": [ 0, 0, -1 ], "RootPointMm": [ -98.449, -68.723, -5.6 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 14, "FaceKind": "cylinder", "AreaMm2": 6170.076, "CenterMm": [ -98.449, -68.723, 4.4 ], "BBoxMm": [ -148.449, -118.723, -5.6, -48.449, -18.723, 14.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, -5.6 ], "Axis": [ -0, -0, 1 ], "RadiusMm": 50, "DiameterMm": 100, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 15, "FaceKind": "cylinder", "AreaMm2": 502.655, "CenterMm": [ -138.449, -68.723, 44.4 ], "BBoxMm": [ -142.449, -72.723, 34.4, -134.449, -64.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -138.449, -68.723, 34.4 ], "Axis": [ -0, -0, 1 ], "RadiusMm": 4, "DiameterMm": 8, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 16, "FaceKind": "plane", "AreaMm2": 50.265, "CenterMm": [ -138.449, -68.723, 34.4 ], "BBoxMm": [ -142.449, -72.723, 34.4, -134.449, -64.723, 34.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -138.449, -68.723, 34.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 17, "FaceKind": "cylinder", "AreaMm2": 502.655, "CenterMm": [ -58.449, -68.723, 44.4 ], "BBoxMm": [ -62.449, -72.723, 34.4, -54.449, -64.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -58.449, -68.723, 34.4 ], "Axis": [ -0, -0, 1 ], "RadiusMm": 4, "DiameterMm": 8, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 18, "FaceKind": "plane", "AreaMm2": 50.265, "CenterMm": [ -58.449, -68.723, 34.4 ], "BBoxMm": [ -62.449, -72.723, 34.4, -54.449, -64.723, 34.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -58.449, -68.723, 34.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 19, "FaceKind": "plane", "AreaMm2": 986.283, "CenterMm": [ -98.449, -66.303, 34.4 ], "BBoxMm": [ -128.449, -66.303, 14.4, -68.449, -66.303, 54.4 ], "Normal": [ -0, -1, 0 ], "RootPointMm": [ -68.449, -66.303, 59.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 20, "FaceKind": "plane", "AreaMm2": 800, "CenterMm": [ -68.449, -56.303, 34.4 ], "BBoxMm": [ -68.449, -66.303, 14.4, -68.449, -46.303, 54.4 ], "Normal": [ 1, 0, 0 ], "RootPointMm": [ -68.449, -66.303, 59.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 21, "FaceKind": "plane", "AreaMm2": 986.283, "CenterMm": [ -98.449, -46.303, 34.4 ], "BBoxMm": [ -128.449, -46.303, 14.4, -68.449, -46.303, 54.4 ], "Normal": [ 0, 1, -0 ], "RootPointMm": [ -68.449, -46.303, 59.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 22, "FaceKind": "plane", "AreaMm2": 800, "CenterMm": [ -128.449, -56.303, 34.4 ], "BBoxMm": [ -128.449, -66.303, 14.4, -128.449, -46.303, 54.4 ], "Normal": [ -1, 0, 0 ], "RootPointMm": [ -128.449, -66.303, 59.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 23, "FaceKind": "plane", "AreaMm2": 241.684, "CenterMm": [ -98.449, -22.223, 14.4 ], "BBoxMm": [ -123.964, -25.723, 14.4, -72.934, -18.723, 14.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.723, 14.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 24, "FaceKind": "plane", "AreaMm2": 1084.275, "CenterMm": [ -98.449, -25.723, 34.4 ], "BBoxMm": [ -132.742, -25.723, 14.4, -64.156, -25.723, 54.4 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -149.974, -25.723, -90.685 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 25, "FaceKind": "plane", "AreaMm2": 825.816, "CenterMm": [ -98.449, -111.723, 30.9 ], "BBoxMm": [ -132.742, -111.723, 14.4, -64.156, -111.723, 47.4 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -135.237, -111.723, -62.182 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 26, "FaceKind": "plane", "AreaMm2": 241.684, "CenterMm": [ -98.449, -115.223, 14.4 ], "BBoxMm": [ -123.964, -118.723, 14.4, -72.934, -111.723, 14.4 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -98.449, -68.723, 14.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 27, "FaceKind": "cylinder", "AreaMm2": 131.095, "CenterMm": [ -144.949, -68.723, 4.4 ], "BBoxMm": [ -148.449, -71.723, 1.4, -141.449, -65.723, 7.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -13.716, -68.723, 4.4 ], "Axis": [ -1, 0, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "side_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 28, "FaceKind": "cylinder", "AreaMm2": 131.098, "CenterMm": [ -98.449, -22.223, 4.4 ], "BBoxMm": [ -101.449, -25.723, 1.4, -95.449, -18.723, 7.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -14.3, 4.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 29, "FaceKind": "plane", "AreaMm2": 245.437, "CenterMm": [ -98.449, -33.723, 38.15 ], "BBoxMm": [ -130.949, -33.723, 21.9, -65.949, -33.723, 54.4 ], "Normal": [ 0, 1, 0 ], "RootPointMm": [ -98.449, -33.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 30, "FaceKind": "cylinder", "AreaMm2": 816.814, "CenterMm": [ -98.449, -29.723, 38.15 ], "BBoxMm": [ -130.949, -33.723, 21.9, -65.949, -25.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -25.723, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 32.5, "DiameterMm": 65, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 31, "FaceKind": "cylinder", "AreaMm2": 3339.392, "CenterMm": [ -98.449, -94.678, 36.9 ], "BBoxMm": [ -133.449, -112.634, 19.4, -63.449, -76.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -76.723, 54.4 ], "Axis": [ -0, -1, -0 ], "RadiusMm": 35, "DiameterMm": 70, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 32, "FaceKind": "plane", "AreaMm2": 903.993, "CenterMm": [ -98.449, -76.723, 36.9 ], "BBoxMm": [ -133.449, -76.723, 19.4, -63.449, -76.723, 54.4 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -76.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 33, "FaceKind": "cylinder", "AreaMm2": 392.699, "CenterMm": [ -98.449, -74.223, 41.9 ], "BBoxMm": [ -123.449, -76.723, 29.4, -73.449, -71.723, 54.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -71.723, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 25, "DiameterMm": 50, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 34, "FaceKind": "plane", "AreaMm2": 431.969, "CenterMm": [ -98.449, -71.723, 39.4 ], "BBoxMm": [ -128.449, -71.723, 24.4, -68.449, -71.723, 54.4 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -71.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 35, "FaceKind": "cylinder", "AreaMm2": 43.982, "CenterMm": [ -73.855, -74.723, 35.529 ], "BBoxMm": [ -75.605, -76.723, 33.779, -72.105, -72.723, 37.279 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -73.855, -72.723, 35.529 ], "Axis": [ -0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 36, "FaceKind": "plane", "AreaMm2": 9.621, "CenterMm": [ -73.855, -72.723, 35.529 ], "BBoxMm": [ -75.605, -72.723, 33.779, -72.105, -72.723, 37.279 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -73.855, -72.723, 35.529 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 37, "FaceKind": "cylinder", "AreaMm2": 43.982, "CenterMm": [ -94.403, -74.723, 23.666 ], "BBoxMm": [ -96.153, -76.723, 21.916, -92.653, -72.723, 25.416 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -94.403, -72.723, 23.666 ], "Axis": [ -0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 38, "FaceKind": "plane", "AreaMm2": 9.621, "CenterMm": [ -94.403, -72.723, 23.666 ], "BBoxMm": [ -96.153, -72.723, 21.916, -92.653, -72.723, 25.416 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -94.403, -72.723, 23.666 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 39, "FaceKind": "cylinder", "AreaMm2": 43.982, "CenterMm": [ -117.32, -74.723, 29.807 ], "BBoxMm": [ -119.07, -76.723, 28.057, -115.57, -72.723, 31.557 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -117.32, -72.723, 29.807 ], "Axis": [ -0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 40, "FaceKind": "plane", "AreaMm2": 9.621, "CenterMm": [ -117.32, -72.723, 29.807 ], "BBoxMm": [ -119.07, -72.723, 28.057, -115.57, -72.723, 31.557 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -117.32, -72.723, 29.807 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 41, "FaceKind": "cylinder", "AreaMm2": 43.982, "CenterMm": [ -129.184, -74.723, 50.354 ], "BBoxMm": [ -130.934, -76.723, 48.604, -127.434, -72.723, 52.104 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -129.184, -72.723, 50.354 ], "Axis": [ -0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 42, "FaceKind": "plane", "AreaMm2": 9.621, "CenterMm": [ -129.184, -72.723, 50.354 ], "BBoxMm": [ -130.934, -72.723, 48.604, -127.434, -72.723, 52.104 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -129.184, -72.723, 50.354 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 43, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -55.449, -68.723, 4.4 ], "BBoxMm": [ -55.449, -74.223, -0.363, -55.449, -63.223, 9.164 ], "Normal": [ -1, 0, 0 ], "RootPointMm": [ -55.449, -68.723, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 44, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -141.449, -68.723, 4.4 ], "BBoxMm": [ -141.449, -74.223, -0.363, -141.449, -63.223, 9.164 ], "Normal": [ -1, 0, 0 ], "RootPointMm": [ -141.449, -68.723, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 45, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -139.759, -72.848, 6.782 ], "BBoxMm": [ -141.449, -74.223, 4.4, -138.069, -71.473, 9.164 ], "Normal": [ 0, 0.866, -0.5 ], "RootPointMm": [ -156, -74.223, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 46, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -139.759, -72.848, 2.019 ], "BBoxMm": [ -141.449, -74.223, -0.363, -138.069, -71.473, 4.4 ], "Normal": [ 0, 0.866, 0.5 ], "RootPointMm": [ -156, -71.473, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 47, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -139.902, -68.723, -0.363 ], "BBoxMm": [ -141.449, -71.473, -0.363, -138.354, -65.973, -0.363 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -156, -65.973, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 48, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -139.759, -64.598, 2.019 ], "BBoxMm": [ -141.449, -65.973, -0.363, -138.069, -63.223, 4.4 ], "Normal": [ -0, -0.866, 0.5 ], "RootPointMm": [ -156, -63.223, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 49, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -139.759, -64.598, 6.782 ], "BBoxMm": [ -141.449, -65.973, 4.4, -138.069, -63.223, 9.164 ], "Normal": [ -0, -0.866, -0.5 ], "RootPointMm": [ -156, -65.973, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 50, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -139.902, -68.723, 9.164 ], "BBoxMm": [ -141.449, -71.473, 9.164, -138.354, -65.973, 9.164 ], "Normal": [ -0, -0, -1 ], "RootPointMm": [ -156, -71.473, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 51, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -56.996, -68.723, 9.164 ], "BBoxMm": [ -58.543, -71.473, 9.164, -55.449, -65.973, 9.164 ], "Normal": [ -0, -0, -1 ], "RootPointMm": [ -156, -71.473, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 52, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -57.139, -72.848, 2.019 ], "BBoxMm": [ -58.829, -74.223, -0.363, -55.449, -71.473, 4.4 ], "Normal": [ 0, 0.866, 0.5 ], "RootPointMm": [ -156, -71.473, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 53, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -57.139, -72.848, 6.782 ], "BBoxMm": [ -58.829, -74.223, 4.4, -55.449, -71.473, 9.164 ], "Normal": [ 0, 0.866, -0.5 ], "RootPointMm": [ -156, -74.223, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 54, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -57.139, -64.598, 6.782 ], "BBoxMm": [ -58.829, -65.973, 4.4, -55.449, -63.223, 9.164 ], "Normal": [ -0, -0.866, -0.5 ], "RootPointMm": [ -156, -65.973, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 55, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -57.139, -64.598, 2.019 ], "BBoxMm": [ -58.829, -65.973, -0.363, -55.449, -63.223, 4.4 ], "Normal": [ -0, -0.866, 0.5 ], "RootPointMm": [ -156, -63.223, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 56, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -56.996, -68.723, -0.363 ], "BBoxMm": [ -58.543, -71.473, -0.363, -55.449, -65.973, -0.363 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -156, -65.973, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 57, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -98.449, -25.723, 4.4 ], "BBoxMm": [ -103.949, -25.723, -0.363, -92.949, -25.723, 9.164 ], "Normal": [ 0, 1, 0 ], "RootPointMm": [ -98.449, -25.723, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 58, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -98.449, -111.723, 4.4 ], "BBoxMm": [ -103.949, -111.723, -0.363, -92.949, -111.723, 9.164 ], "Normal": [ 0, 1, 0 ], "RootPointMm": [ -98.449, -111.723, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 59, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -94.324, -110.033, 6.782 ], "BBoxMm": [ -95.699, -111.723, 4.4, -92.949, -108.343, 9.164 ], "Normal": [ -0.866, 0, -0.5 ], "RootPointMm": [ -92.949, -126.275, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 60, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -98.449, -110.176, 9.164 ], "BBoxMm": [ -101.199, -111.723, 9.164, -95.699, -108.629, 9.164 ], "Normal": [ 0, 0, -1 ], "RootPointMm": [ -95.699, -126.275, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 61, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -102.574, -110.033, 6.782 ], "BBoxMm": [ -103.949, -111.723, 4.4, -101.199, -108.343, 9.164 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -101.199, -126.275, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 62, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -102.574, -110.033, 2.019 ], "BBoxMm": [ -103.949, -111.723, -0.363, -101.199, -108.343, 4.4 ], "Normal": [ 0.866, -0, 0.5 ], "RootPointMm": [ -103.949, -126.275, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 63, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -98.449, -110.176, -0.363 ], "BBoxMm": [ -101.199, -111.723, -0.363, -95.699, -108.629, -0.363 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -101.199, -126.275, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 64, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -94.324, -110.033, 2.019 ], "BBoxMm": [ -95.699, -111.723, -0.363, -92.949, -108.343, 4.4 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -95.699, -126.275, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 65, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -94.324, -27.413, 2.019 ], "BBoxMm": [ -95.699, -29.103, -0.363, -92.949, -25.723, 4.4 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -95.699, -126.275, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 66, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -98.449, -27.271, -0.363 ], "BBoxMm": [ -101.199, -28.818, -0.363, -95.699, -25.723, -0.363 ], "Normal": [ 0, 0, 1 ], "RootPointMm": [ -101.199, -126.275, -0.363 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 67, "FaceKind": "plane", "AreaMm2": 16.673, "CenterMm": [ -98.449, -27.271, 9.164 ], "BBoxMm": [ -101.199, -28.818, 9.164, -95.699, -25.723, 9.164 ], "Normal": [ 0, 0, -1 ], "RootPointMm": [ -95.699, -126.275, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 68, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -94.324, -27.413, 6.782 ], "BBoxMm": [ -95.699, -29.103, 4.4, -92.949, -25.723, 9.164 ], "Normal": [ -0.866, 0, -0.5 ], "RootPointMm": [ -92.949, -126.275, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 69, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -102.574, -27.413, 2.019 ], "BBoxMm": [ -103.949, -29.103, -0.363, -101.199, -25.723, 4.4 ], "Normal": [ 0.866, -0, 0.5 ], "RootPointMm": [ -103.949, -126.275, 4.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 70, "FaceKind": "plane", "AreaMm2": 17.717, "CenterMm": [ -102.574, -27.413, 6.782 ], "BBoxMm": [ -103.949, -29.103, 4.4, -101.199, -25.723, 9.164 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -101.199, -126.275, 9.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 71, "FaceKind": "plane", "AreaMm2": 133.712, "CenterMm": [ -115.146, -97.459, 19.02 ], "BBoxMm": [ -115.146, -104.695, 14.4, -115.146, -90.223, 23.64 ], "Normal": [ -1, -0, -0 ], "RootPointMm": [ -115.146, -90.223, -22.6 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 72, "FaceKind": "plane", "AreaMm2": 212.905, "CenterMm": [ -98.452, -90.223, 19.02 ], "BBoxMm": [ -115.146, -90.223, 14.4, -81.757, -90.223, 23.64 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -115.146, -90.223, -22.6 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 73, "FaceKind": "plane", "AreaMm2": 133.669, "CenterMm": [ -81.757, -97.459, 19.019 ], "BBoxMm": [ -81.757, -104.695, 14.4, -81.757, -90.223, 23.637 ], "Normal": [ 1, 0, 0 ], "RootPointMm": [ -81.757, -90.223, -22.6 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件1-1", "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 74, "FaceKind": "plane", "AreaMm2": 212.905, "CenterMm": [ -98.452, -104.695, 19.02 ], "BBoxMm": [ -115.146, -104.695, 14.4, -81.757, -104.695, 23.64 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -115.146, -104.695, -22.6 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" } ], "image_views": [ { "ImageKind": "assembly_component_highlight_view", "RequestedView": "best_oblique", "ViewName": "highlight_component_1_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "assembly_context_highlight_component_1", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 0, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_highlights\\component_1\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with whole component selected using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=False; hidden=0; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:22:54.2398216+08:00", "CompletedAt": "2026-07-09T14:22:56.5170627+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#5", "电机与大臂外壳连接件3-1:face#7" ], "HighlightViewDirectionMm": [ 0.9812869642873387, 0.007388513613457522, -0.19240920868379202 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:22.071109+08:00", "CompletedAt": "2026-07-09T14:23:37.5676164+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#31", "电机与大臂外壳连接件3-1:face#9" ], "HighlightViewDirectionMm": [ 5.260177309520753E-16, -0.9606926861707835, -0.27761405356711405 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:37.5752871+08:00", "CompletedAt": "2026-07-09T14:23:57.4506603+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#8", "小臂外壳1-1:face#6" ], "HighlightViewDirectionMm": [ -0.9752905205093229, -0.010019730178344293, -0.22069890260671257 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_8__小臂外壳1_1_face_6\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:25:18.7043007+08:00", "CompletedAt": "2026-07-09T14:25:39.9418722+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#11", "小臂外壳1-1:face#6" ], "HighlightViewDirectionMm": [ 0.975290520509323, -0.010019730178344281, -0.2206989026067123 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_11__小臂外壳1_1_face_6\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:25:39.947741+08:00", "CompletedAt": "2026-07-09T14:26:00.0266825+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#7", "电机与大臂外壳连接件3-1:face#5" ], "HighlightViewDirectionMm": [ 6.026524059186483E-16, 0.9480708554640793, -0.3180591973510732 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:26:00.0367322+08:00", "CompletedAt": "2026-07-09T14:26:20.5947798+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#6", "电机与大臂外壳连接件3-1:face#6" ], "HighlightViewDirectionMm": [ -0.9812869642873387, 0.0073885136134575246, -0.1924092086837921 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:26:20.6017513+08:00", "CompletedAt": "2026-07-09T14:26:41.322723+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#30", "电机与大臂外壳连接件3-1:face#16" ], "HighlightViewDirectionMm": [ 3.57815535708632E-16, 0.9820073449378016, -0.18884272421305892 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:26:41.3287843+08:00", "CompletedAt": "2026-07-09T14:27:01.2935705+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#4", "电机与大臂外壳连接件3-1:face#5" ], "HighlightViewDirectionMm": [ 1.3083996457654244E-15, 0.723305376286585, -0.6905282996626001 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:27:01.2995915+08:00", "CompletedAt": "2026-07-09T14:27:22.3007394+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#33", "电机与大臂外壳连接件3-1:face#14" ], "HighlightViewDirectionMm": [ 1.5280577190243191E-15, -0.5912937374502798, -0.8064562703904532 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:27:22.3061798+08:00", "CompletedAt": "2026-07-09T14:27:42.4656783+08:00" } ], "counts": { "features": 14, "faces": 74, "image_views": 10 } }, { "component_id": "component_42", "instance_name": "电机与大臂外壳连接件3-1", "display_name": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_42", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_42\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_42/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_4", "Type": "hole_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#3", "电机与大臂外壳连接件3-1:face#4" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 4, "diameter_mm": 8, "axis": [ -0, 0, -1 ], "center_points_mm": [ [ -138.449, -68.723, 59.4 ], [ -58.449, -68.723, 59.4 ] ], "entry_face_candidate_refs": [ "轴承与连接臂连接件-1:face#16", "轴承与连接臂连接件-1:face#14", "轴承与连接臂连接件-1:face#26", "电机与大臂外壳连接件1-1:face#6", "电机与大臂外壳连接件1-1:face#5" ], "member_count": 2, "pattern_type": "coplanar_parallel_hole_pair", "grouping_basis": "same diameter, parallel axes, shared axial parameter plane, and center-parameter distribution", "pattern_plane_normal": [ -0, 0, -1 ], "pattern_plane_t_mm": -59.4, "pattern_center_mm": [ -98.449, -68.723, 59.4 ], "spacing_mm": 80 } }, { "Id": "hole_group_10", "Type": "hole_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#18", "电机与大臂外壳连接件3-1:face#20" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 9, "diameter_mm": 18, "axis": [ 0, -0, 1 ], "center_points_mm": [ [ -58.949, -68.723, 77.723 ], [ -137.949, -68.723, 77.723 ] ], "entry_face_candidate_refs": [ "轴承与连接臂连接件-1:face#23", "电机与大臂外壳连接件3-1:face#19", "电机与大臂外壳连接件3-1:face#21", "轴承与连接臂连接件-1:face#26" ], "member_count": 2, "pattern_type": "coplanar_parallel_hole_pair", "grouping_basis": "same diameter, parallel axes, shared axial parameter plane, and center-parameter distribution", "pattern_plane_normal": [ 0, -0, 1 ], "pattern_plane_t_mm": 77.723, "pattern_center_mm": [ -98.449, -68.723, 77.723 ], "spacing_mm": 79 } }, { "Id": "hole_group_11", "Type": "hole_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#24", "电机与大臂外壳连接件3-1:face#26", "电机与大臂外壳连接件3-1:face#28", "电机与大臂外壳连接件3-1:face#30" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 1.75, "diameter_mm": 3.5, "axis": [ 0, -1, -0 ], "center_points_mm": [ [ -123.043, -74.223, 73.272 ], [ -102.495, -74.223, 85.135 ], [ -79.577, -74.223, 78.994 ], [ -67.714, -74.223, 58.447 ] ], "entry_face_candidate_refs": [ "电机与大臂外壳连接件1-1:face#45", "电机与大臂外壳连接件1-1:face#46", "电机与大臂外壳连接件1-1:face#53", "电机与大臂外壳连接件1-1:face#52" ], "member_count": 4, "pattern_type": "coplanar_parallel_hole_pattern", "grouping_basis": "same diameter, parallel axes, shared axial parameter plane, and center-parameter distribution", "pattern_plane_normal": [ 0, -1, -0 ], "pattern_plane_t_mm": 74.223, "pattern_center_mm": [ -93.207, -74.223, 73.962 ], "spacing_mm": 23.726 } }, { "Id": "cylindrical_surface_group_2", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#22" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 48, "diameter_mm": 96, "axis": [ 0, -1, -0 ], "axis_point_mm": [ -98.449, -1.723, 54.4 ], "total_area_mm2": 10086.275, "member_count": 1 } }, { "Id": "cylindrical_surface_group_7", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#5" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 30, "diameter_mm": 60, "axis": [ 0, -1, -0 ], "axis_point_mm": [ -98.449, -25.723, 54.4 ], "total_area_mm2": 3581.416, "member_count": 1 } }, { "Id": "cylindrical_surface_group_9", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#9" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 35, "diameter_mm": 70, "axis": [ -0, 1, 0 ], "axis_point_mm": [ -98.449, -68.723, 54.4 ], "total_area_mm2": 2915.681, "member_count": 1 } }, { "Id": "cylindrical_surface_group_10", "Type": "cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#10", "电机与大臂外壳连接件3-1:face#11", "电机与大臂外壳连接件3-1:face#12", "电机与大臂外壳连接件3-1:face#13" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "outer_shell_candidate", "boss_or_side_cylindrical_surface_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 55, "diameter_mm": 110, "axis": [ -0, 0, -1 ], "axis_point_mm": [ -98.449, -68.723, 164.4 ], "total_area_mm2": 1872.772, "member_count": 4 } }, { "Id": "cylindrical_surface_group_15", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#16" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 32.5, "diameter_mm": 65, "axis": [ -0, 1, 0 ], "axis_point_mm": [ -98.449, -33.723, 54.4 ], "total_area_mm2": 816.814, "member_count": 1 } }, { "Id": "cylindrical_surface_group_17", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#14" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 25, "diameter_mm": 50, "axis": [ 0, -1, -0 ], "axis_point_mm": [ -98.449, -71.723, 54.4 ], "total_area_mm2": 392.699, "member_count": 1 } }, { "Id": "planar_surface_candidate_10", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "FaceRefs": [ "电机与大臂外壳连接件3-1:face#1" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1326.155, "normal": [ 0, -1, -0 ], "center_mm": [ -98.449, -25.723, 78.4 ], "bbox_mm": [ -132.742, -25.723, 54.4, -64.156, -25.723, 102.4 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 1, "FaceKind": "plane", "AreaMm2": 1326.155, "CenterMm": [ -98.449, -25.723, 78.4 ], "BBoxMm": [ -132.742, -25.723, 54.4, -64.156, -25.723, 102.4 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -133.449, -25.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 2, "FaceKind": "plane", "AreaMm2": 1067.697, "CenterMm": [ -98.449, -111.723, 81.9 ], "BBoxMm": [ -132.742, -111.723, 61.4, -64.156, -111.723, 102.4 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -133.449, -111.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 251.327, "CenterMm": [ -138.449, -68.723, 59.4 ], "BBoxMm": [ -142.449, -72.723, 54.4, -134.449, -64.723, 64.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -138.449, -68.723, 99.4 ], "Axis": [ -0, 0, -1 ], "RadiusMm": 4, "DiameterMm": 8, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 4, "FaceKind": "cylinder", "AreaMm2": 251.327, "CenterMm": [ -58.449, -68.723, 59.4 ], "BBoxMm": [ -62.449, -72.723, 54.4, -54.449, -64.723, 64.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -58.449, -68.723, 99.4 ], "Axis": [ -0, 0, -1 ], "RadiusMm": 4, "DiameterMm": 8, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 5, "FaceKind": "cylinder", "AreaMm2": 3581.416, "CenterMm": [ -98.449, -52.723, 69.4 ], "BBoxMm": [ -128.449, -71.723, 54.4, -68.449, -33.723, 84.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -25.723, 54.4 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 30, "DiameterMm": 60, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 6, "FaceKind": "plane", "AreaMm2": 1135.711, "CenterMm": [ -134.949, -68.436, 54.4 ], "BBoxMm": [ -146.449, -111.15, 54.4, -123.449, -25.723, 54.4 ], "Normal": [ 0, -0, 1 ], "RootPointMm": [ -133.449, -68.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 7, "FaceKind": "plane", "AreaMm2": 1135.711, "CenterMm": [ -61.949, -68.436, 54.4 ], "BBoxMm": [ -73.449, -111.15, 54.4, -50.449, -25.723, 54.4 ], "Normal": [ 0, 0, -1 ], "RootPointMm": [ -63.449, -68.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 8, "FaceKind": "plane", "AreaMm2": 426.051, "CenterMm": [ -98.449, -71.723, 69.4 ], "BBoxMm": [ -128.449, -71.723, 54.4, -68.449, -71.723, 84.4 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -98.449, -71.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 9, "FaceKind": "cylinder", "AreaMm2": 2915.681, "CenterMm": [ -98.449, -94.678, 71.9 ], "BBoxMm": [ -133.449, -112.634, 54.4, -63.449, -76.723, 89.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, 54.4 ], "Axis": [ -0, 1, 0 ], "RadiusMm": 35, "DiameterMm": 70, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 10, "FaceKind": "cylinder", "AreaMm2": 466.069, "CenterMm": [ -138.291, -103.649, 71.193 ], "BBoxMm": [ -146.449, -114.331, 54.4, -130.134, -92.967, 87.986 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, 164.4 ], "Axis": [ -0, 0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 11, "FaceKind": "cylinder", "AreaMm2": 470.317, "CenterMm": [ -137.92, -33.798, 71.193 ], "BBoxMm": [ -146.449, -45.222, 54.4, -129.391, -22.373, 87.986 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, 164.4 ], "Axis": [ -0, 0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 12, "FaceKind": "cylinder", "AreaMm2": 470.321, "CenterMm": [ -58.606, -33.798, 71.193 ], "BBoxMm": [ -66.764, -44.48, 54.4, -50.449, -23.115, 87.986 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, 164.4 ], "Axis": [ -0, 0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 13, "FaceKind": "cylinder", "AreaMm2": 466.065, "CenterMm": [ -58.978, -103.649, 71.193 ], "BBoxMm": [ -67.507, -115.074, 54.4, -50.449, -92.224, 87.986 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -68.723, 164.4 ], "Axis": [ -0, 0, -1 ], "RadiusMm": 55, "DiameterMm": 110, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 14, "FaceKind": "cylinder", "AreaMm2": 392.699, "CenterMm": [ -98.449, -74.223, 66.9 ], "BBoxMm": [ -123.449, -76.723, 54.4, -73.449, -71.723, 79.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -71.723, 54.4 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 25, "DiameterMm": 50, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 15, "FaceKind": "plane", "AreaMm2": 903.993, "CenterMm": [ -98.449, -76.723, 71.9 ], "BBoxMm": [ -133.449, -76.723, 54.4, -63.449, -76.723, 89.4 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -98.449, -76.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 16, "FaceKind": "cylinder", "AreaMm2": 816.814, "CenterMm": [ -98.449, -29.723, 70.65 ], "BBoxMm": [ -130.949, -33.723, 54.4, -65.949, -25.723, 86.9 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -33.723, 54.4 ], "Axis": [ -0, 1, 0 ], "RadiusMm": 32.5, "DiameterMm": 65, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_cylindrical_fit_surface", "ProcessConfidence": "medium_high", "ProcessBasis": "coaxial cylindrical fit candidate", "MachiningScope": "full_contact_face" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 17, "FaceKind": "plane", "AreaMm2": 245.437, "CenterMm": [ -98.449, -33.723, 70.65 ], "BBoxMm": [ -130.949, -33.723, 54.4, -65.949, -33.723, 86.9 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -98.449, -33.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 18, "FaceKind": "cylinder", "AreaMm2": 805.434, "CenterMm": [ -58.949, -68.723, 77.723 ], "BBoxMm": [ -67.449, -77.723, 60.812, -50.449, -59.723, 94.634 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -58.449, -68.723, 64.4 ], "Axis": [ 0, -0, 1 ], "RadiusMm": 9, "DiameterMm": 18, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 19, "FaceKind": "plane", "AreaMm2": 188.142, "CenterMm": [ -59.475, -68.723, 64.4 ], "BBoxMm": [ -67.449, -77.723, 64.4, -51.502, -59.723, 64.4 ], "Normal": [ 0, -0, 1 ], "RootPointMm": [ -58.449, -68.723, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 20, "FaceKind": "cylinder", "AreaMm2": 805.434, "CenterMm": [ -137.949, -68.723, 77.723 ], "BBoxMm": [ -146.449, -77.723, 60.812, -129.449, -59.723, 94.634 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -138.449, -68.723, 64.4 ], "Axis": [ 0, -0, 1 ], "RadiusMm": 9, "DiameterMm": 18, "OrientationRole": "vertical_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 21, "FaceKind": "plane", "AreaMm2": 188.142, "CenterMm": [ -137.422, -68.723, 64.4 ], "BBoxMm": [ -145.396, -77.723, 64.4, -129.449, -59.723, 64.4 ], "Normal": [ 0, -0, 1 ], "RootPointMm": [ -138.449, -68.723, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 22, "FaceKind": "cylinder", "AreaMm2": 10086.275, "CenterMm": [ -98.449, -68.723, 78.4 ], "BBoxMm": [ -146.449, -115.074, 54.4, -50.449, -22.373, 102.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -1.723, 54.4 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 48, "DiameterMm": 96, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 23, "FaceKind": "plane", "AreaMm2": 8.142, "CenterMm": [ -123.078, -71.723, 73.272 ], "BBoxMm": [ -124.793, -71.723, 71.523, -121.363, -71.723, 75.022 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -123.043, -71.723, 73.272 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 24, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -123.043, -74.223, 73.272 ], "BBoxMm": [ -124.793, -76.723, 71.522, -121.293, -71.723, 75.022 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -123.043, -71.723, 73.272 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 25, "FaceKind": "plane", "AreaMm2": 8.142, "CenterMm": [ -102.495, -71.723, 85.406 ], "BBoxMm": [ -104.245, -71.723, 83.926, -100.745, -71.723, 86.885 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -102.495, -71.723, 85.135 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 26, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -102.495, -74.223, 85.135 ], "BBoxMm": [ -104.245, -76.723, 83.385, -100.745, -71.723, 86.885 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -102.495, -71.723, 85.135 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 27, "FaceKind": "plane", "AreaMm2": 8.142, "CenterMm": [ -79.577, -71.723, 79.03 ], "BBoxMm": [ -81.327, -71.723, 77.315, -77.827, -71.723, 80.744 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -79.577, -71.723, 78.994 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 28, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -79.577, -74.223, 78.994 ], "BBoxMm": [ -81.327, -76.723, 77.244, -77.827, -71.723, 80.744 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -79.577, -71.723, 78.994 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 29, "FaceKind": "plane", "AreaMm2": 8.142, "CenterMm": [ -67.443, -71.723, 58.447 ], "BBoxMm": [ -68.923, -71.723, 56.697, -65.964, -71.723, 60.197 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -67.714, -71.723, 58.447 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 30, "FaceKind": "cylinder", "AreaMm2": 54.978, "CenterMm": [ -67.714, -74.223, 58.447 ], "BBoxMm": [ -69.464, -76.723, 56.697, -65.964, -71.723, 60.197 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -67.714, -71.723, 58.447 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 1.75, "DiameterMm": 3.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 31, "FaceKind": "plane", "AreaMm2": 241.031, "CenterMm": [ -127.302, -90.223, 75.545 ], "BBoxMm": [ -133.449, -90.223, 54.4, -121.156, -90.223, 96.69 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -133.449, -90.223, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 32, "FaceKind": "plane", "AreaMm2": 503.22, "CenterMm": [ -133.449, -97.883, 70.825 ], "BBoxMm": [ -133.449, -105.543, 54.4, -133.449, -90.223, 87.249 ], "Normal": [ -1, -0, 0 ], "RootPointMm": [ -133.449, -90.223, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 33, "FaceKind": "plane", "AreaMm2": 241.031, "CenterMm": [ -127.302, -105.543, 75.545 ], "BBoxMm": [ -133.449, -105.543, 54.4, -121.156, -105.543, 96.69 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -133.449, -105.543, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 34, "FaceKind": "plane", "AreaMm2": 239.829, "CenterMm": [ -121.156, -97.883, 88.862 ], "BBoxMm": [ -121.156, -105.543, 81.035, -121.156, -90.223, 96.69 ], "Normal": [ 1, 0, -0 ], "RootPointMm": [ -121.156, -90.223, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 35, "FaceKind": "plane", "AreaMm2": 241.031, "CenterMm": [ -69.595, -90.223, 75.545 ], "BBoxMm": [ -75.741, -90.223, 54.4, -63.449, -90.223, 96.69 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -63.449, -90.223, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 36, "FaceKind": "plane", "AreaMm2": 239.829, "CenterMm": [ -75.741, -97.883, 88.862 ], "BBoxMm": [ -75.741, -105.543, 81.035, -75.741, -90.223, 96.69 ], "Normal": [ -1, -0, 0 ], "RootPointMm": [ -75.741, -90.223, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 37, "FaceKind": "plane", "AreaMm2": 241.031, "CenterMm": [ -69.595, -105.543, 75.545 ], "BBoxMm": [ -75.741, -105.543, 54.4, -63.449, -105.543, 96.69 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -63.449, -105.543, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机与大臂外壳连接件3-1", "ComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件3.SLDPRT", "ComponentFileName": "电机与大臂外壳连接件3.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 38, "FaceKind": "plane", "AreaMm2": 503.22, "CenterMm": [ -63.449, -97.883, 70.825 ], "BBoxMm": [ -63.449, -105.543, 54.4, -63.449, -90.223, 87.249 ], "Normal": [ 1, 0, -0 ], "RootPointMm": [ -63.449, -90.223, 164.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" } ], "image_views": [ { "ImageKind": "assembly_component_highlight_view", "RequestedView": "best_oblique", "ViewName": "highlight_component_42_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "assembly_context_highlight_component_42", "HighlightComponentId": "component_42", "HighlightComponentInstanceName": "电机与大臂外壳连接件3-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_highlights\\component_42\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with whole component selected using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=37; preserved_context=3; model not saved", "Error": "", "StartedAt": "2026-07-09T14:22:56.5170891+08:00", "CompletedAt": "2026-07-09T14:23:01.4946665+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#5", "电机与大臂外壳连接件3-1:face#7" ], "HighlightViewDirectionMm": [ 0.9812869642873387, 0.007388513613457522, -0.19240920868379202 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_5__电机与大臂外壳连接件3_1_face_7\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:22.071109+08:00", "CompletedAt": "2026-07-09T14:23:37.5676164+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#31", "电机与大臂外壳连接件3-1:face#9" ], "HighlightViewDirectionMm": [ 5.260177309520753E-16, -0.9606926861707835, -0.27761405356711405 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_31__电机与大臂外壳连接件3_1_face_9\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:37.5752871+08:00", "CompletedAt": "2026-07-09T14:23:57.4506603+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#10" ], "HighlightViewDirectionMm": [ -0.6710598191625188, -0.5882426631256203, 0.45127518033284914 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_10\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:57.4562329+08:00", "CompletedAt": "2026-07-09T14:24:17.7016701+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#11" ], "HighlightViewDirectionMm": [ -0.667596648542178, 0.5907243431122633, 0.45316604606902805 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_11\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:24:17.7087452+08:00", "CompletedAt": "2026-07-09T14:24:38.1819442+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#12" ], "HighlightViewDirectionMm": [ 0.6710624286032231, 0.5882470291242166, 0.45126560875351135 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_12\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:24:38.1875561+08:00", "CompletedAt": "2026-07-09T14:24:58.2996958+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13", "HighlightComponentId": "component_41", "HighlightComponentInstanceName": "小臂外壳1-1", "HighlightComponentDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_41", "HighlightInterfaceComponentAInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentADisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "小臂外壳1-1:face#6", "电机与大臂外壳连接件3-1:face#13" ], "HighlightViewDirectionMm": [ 0.6676033186879543, -0.5907133314376827, 0.45317057377837777 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_小臂外壳1_1_face_6__电机与大臂外壳连接件3_1_face_13\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:24:58.3058393+08:00", "CompletedAt": "2026-07-09T14:25:18.6989401+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#7", "电机与大臂外壳连接件3-1:face#5" ], "HighlightViewDirectionMm": [ 6.026524059186483E-16, 0.9480708554640793, -0.3180591973510732 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_7__电机与大臂外壳连接件3_1_face_5\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:26:00.0367322+08:00", "CompletedAt": "2026-07-09T14:26:20.5947798+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#6", "电机与大臂外壳连接件3-1:face#6" ], "HighlightViewDirectionMm": [ -0.9812869642873387, 0.0073885136134575246, -0.1924092086837921 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_6__电机与大臂外壳连接件3_1_face_6\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:26:20.6017513+08:00", "CompletedAt": "2026-07-09T14:26:41.322723+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#30", "电机与大臂外壳连接件3-1:face#16" ], "HighlightViewDirectionMm": [ 3.57815535708632E-16, 0.9820073449378016, -0.18884272421305892 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_30__电机与大臂外壳连接件3_1_face_16\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:26:41.3287843+08:00", "CompletedAt": "2026-07-09T14:27:01.2935705+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#4", "电机与大臂外壳连接件3-1:face#5" ], "HighlightViewDirectionMm": [ 1.3083996457654244E-15, 0.723305376286585, -0.6905282996626001 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_4__电机与大臂外壳连接件3_1_face_5\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:27:01.2995915+08:00", "CompletedAt": "2026-07-09T14:27:22.3007394+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14", "HighlightComponentId": "component_1", "HighlightComponentInstanceName": "电机与大臂外壳连接件1-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14", "HighlightInterfaceContactKind": "cylindrical_coaxial_fit_candidate", "HighlightInterfaceMateRole": "cylindrical_fit", "HighlightInterfaceComponentAId": "component_1", "HighlightInterfaceComponentAInstanceName": "电机与大臂外壳连接件1-1", "HighlightInterfaceComponentADisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)", "HighlightInterfaceComponentBId": "component_42", "HighlightInterfaceComponentBInstanceName": "电机与大臂外壳连接件3-1", "HighlightInterfaceComponentBDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFaceRefs": [ "电机与大臂外壳连接件1-1:face#33", "电机与大臂外壳连接件3-1:face#14" ], "HighlightViewDirectionMm": [ 1.5280577190243191E-15, -0.5912937374502798, -0.8064562703904532 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机与大臂外壳连接件1_1_face_33__电机与大臂外壳连接件3_1_face_14\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:27:22.3061798+08:00", "CompletedAt": "2026-07-09T14:27:42.4656783+08:00" }, { "ImageKind": "assembly_component_context_isolate_view", "RequestedView": "best_oblique", "ViewName": "context_component_42_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "internal_context_group_1_component_38_target_component_42", "HighlightComponentId": "component_42", "HighlightComponentInstanceName": "电机与大臂外壳连接件3-1", "HighlightComponentDisplayName": "电机与大臂外壳连接件3-1 (电机与大臂外壳连接件3)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_contexts\\component_42\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved after temporary hide/show context isolation using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; effective_direction=[0.577,0.577,-0.577]; model not saved", "Error": "", "StartedAt": "2026-07-09T14:28:15.3278577+08:00", "CompletedAt": "2026-07-09T14:28:17.5615018+08:00" } ], "counts": { "features": 10, "faces": 38, "image_views": 13 } }, { "component_id": "component_40", "instance_name": "电机和连接臂连接件-1", "display_name": "电机和连接臂连接件-1 (电机和连接臂连接件)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_40", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_40\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_40/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_5", "Type": "hole_group", "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "FaceRefs": [ "电机和连接臂连接件-1:face#4", "电机和连接臂连接件-1:face#5", "电机和连接臂连接件-1:face#6", "电机和连接臂连接件-1:face#7" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 2.75, "diameter_mm": 5.5, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -110.449, -112.223, 54.4 ], [ -98.449, -112.223, 66.4 ], [ -86.449, -112.223, 54.4 ], [ -98.449, -112.223, 42.4 ] ], "entry_face_candidate_refs": [ "电机与大臂外壳连接件1-1:face#25", "电机与大臂外壳连接件3-1:face#2", "电机与大臂外壳连接件1-1:face#58", "电机和连接臂连接件-1:face#2", "小臂外壳1-1:face#12" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -112.223, "pattern_center_mm": [ -98.449, -112.223, 54.4 ], "pattern_radius_mm": 12, "spacing_mm": 16.971 } }, { "Id": "cylindrical_surface_group_18", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "FaceRefs": [ "电机和连接臂连接件-1:face#1" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 20, "diameter_mm": 40, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, -110.723, 54.4 ], "total_area_mm2": 376.991, "member_count": 1 } } ], "relations": [] }, "faces": [ { "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 376.991, "CenterMm": [ -98.449, -112.223, 54.4 ], "BBoxMm": [ -118.449, -113.723, 34.4, -78.449, -110.723, 74.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -110.723, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 20, "DiameterMm": 40, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 2, "FaceKind": "plane", "AreaMm2": 1161.604, "CenterMm": [ -98.449, -110.723, 54.4 ], "BBoxMm": [ -118.449, -110.723, 34.4, -78.449, -110.723, 74.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -110.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 3, "FaceKind": "plane", "AreaMm2": 1161.604, "CenterMm": [ -98.449, -113.723, 54.4 ], "BBoxMm": [ -118.449, -113.723, 34.4, -78.449, -113.723, 74.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -113.723, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 4, "FaceKind": "cylinder", "AreaMm2": 51.836, "CenterMm": [ -110.449, -112.223, 54.4 ], "BBoxMm": [ -113.199, -113.723, 51.65, -107.699, -110.723, 57.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -110.449, -113.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 5, "FaceKind": "cylinder", "AreaMm2": 51.836, "CenterMm": [ -98.449, -112.223, 66.4 ], "BBoxMm": [ -101.199, -113.723, 63.65, -95.699, -110.723, 69.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -113.723, 66.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 6, "FaceKind": "cylinder", "AreaMm2": 51.836, "CenterMm": [ -86.449, -112.223, 54.4 ], "BBoxMm": [ -89.199, -113.723, 51.65, -83.699, -110.723, 57.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -86.449, -113.723, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "电机和连接臂连接件-1", "ComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机和连接臂连接件.SLDPRT", "ComponentFileName": "电机和连接臂连接件.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 7, "FaceKind": "cylinder", "AreaMm2": 51.836, "CenterMm": [ -98.449, -112.223, 42.4 ], "BBoxMm": [ -101.199, -113.723, 39.65, -95.699, -110.723, 45.15 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -113.723, 42.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" } ], "image_views": [ { "ImageKind": "assembly_component_highlight_view", "RequestedView": "best_oblique", "ViewName": "highlight_component_40_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "assembly_context_highlight_component_40", "HighlightComponentId": "component_40", "HighlightComponentInstanceName": "电机和连接臂连接件-1", "HighlightComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ -0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 1, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_highlights\\component_40\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with whole component selected using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=39; preserved_context=2; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:01.4947028+08:00", "CompletedAt": "2026-07-09T14:23:06.5523855+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12", "HighlightComponentId": "component_40", "HighlightComponentInstanceName": "电机和连接臂连接件-1", "HighlightComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_40", "HighlightInterfaceComponentAInstanceName": "电机和连接臂连接件-1", "HighlightInterfaceComponentADisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "电机和连接臂连接件-1:face#3", "小臂外壳1-1:face#12" ], "HighlightViewDirectionMm": [ 3.1580378931091815E-16, -1, 0 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_电机和连接臂连接件_1_face_3__小臂外壳1_1_face_12\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:27:42.4714057+08:00", "CompletedAt": "2026-07-09T14:28:03.2739635+08:00" }, { "ImageKind": "assembly_component_context_isolate_view", "RequestedView": "best_oblique", "ViewName": "context_component_40_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "internal_context_group_3_component_40_target_component_40", "HighlightComponentId": "component_40", "HighlightComponentInstanceName": "电机和连接臂连接件-1", "HighlightComponentDisplayName": "电机和连接臂连接件-1 (电机和连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ -0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 1, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_contexts\\component_40\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved after temporary hide/show context isolation using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; effective_direction=[-0.577,0.577,-0.577]; model not saved", "Error": "", "StartedAt": "2026-07-09T14:28:35.2142728+08:00", "CompletedAt": "2026-07-09T14:28:37.5360943+08:00" } ], "counts": { "features": 2, "faces": 7, "image_views": 3 } }, { "component_id": "component_39", "instance_name": "轴承与连接臂连接件-1", "display_name": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_39", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\part_check_extractions\\component_39\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_39/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_2", "Type": "hole_group", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#1", "轴承与连接臂连接件-1:face#2", "轴承与连接臂连接件-1:face#3", "轴承与连接臂连接件-1:face#4" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -98.449, -25.224, 44.4 ], [ -98.449, -25.224, 64.4 ], [ -108.449, -25.224, 54.4 ], [ -88.449, -25.224, 54.4 ] ], "entry_face_candidate_refs": [ "电机与大臂外壳连接件1-1:face#24", "电机与大臂外壳连接件3-1:face#1", "电机与大臂外壳连接件1-1:face#57", "轴承与连接臂连接件-1:face#29", "轴承与连接臂连接件-1:face#22", "轴承与连接臂连接件-1:face#15", "轴承与连接臂连接件-1:face#8" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -25.224, "pattern_center_mm": [ -98.449, -25.224, 54.4 ], "pattern_radius_mm": 10, "spacing_mm": 14.142 } }, { "Id": "cylindrical_surface_group_12", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#5" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 25, "diameter_mm": 50, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, -23.724, 54.4 ], "total_area_mm2": 1413.717, "member_count": 1 } }, { "Id": "planar_surface_candidate_6", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#6" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1850.398, "normal": [ -0, 1, -0 ], "center_mm": [ -98.449, -23.724, 54.4 ], "bbox_mm": [ -123.449, -23.724, 29.4, -73.449, -23.724, 79.4 ] } }, { "Id": "planar_surface_candidate_7", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#7" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1649.128, "normal": [ -0, 1, -0 ], "center_mm": [ -98.449, -32.724, 54.4 ], "bbox_mm": [ -123.449, -32.724, 29.4, -73.449, -32.724, 79.4 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -98.449, -25.224, 44.4 ], "BBoxMm": [ -101.449, -26.724, 41.4, -95.449, -23.724, 47.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -32.724, 44.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 2, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -98.449, -25.224, 64.4 ], "BBoxMm": [ -101.449, -26.724, 61.4, -95.449, -23.724, 67.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -32.724, 64.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -108.449, -25.224, 54.4 ], "BBoxMm": [ -111.449, -26.724, 51.4, -105.449, -23.724, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -108.449, -32.724, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 4, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -88.449, -25.224, 54.4 ], "BBoxMm": [ -91.449, -26.724, 51.4, -85.449, -23.724, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -88.449, -32.724, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 5, "FaceKind": "cylinder", "AreaMm2": 1413.717, "CenterMm": [ -98.449, -28.224, 54.4 ], "BBoxMm": [ -123.449, -32.724, 29.4, -73.449, -23.724, 79.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -23.724, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 25, "DiameterMm": 50, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 6, "FaceKind": "plane", "AreaMm2": 1850.398, "CenterMm": [ -98.449, -23.724, 54.4 ], "BBoxMm": [ -123.449, -23.724, 29.4, -73.449, -23.724, 79.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -23.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 7, "FaceKind": "plane", "AreaMm2": 1649.128, "CenterMm": [ -98.449, -32.724, 54.4 ], "BBoxMm": [ -123.449, -32.724, 29.4, -73.449, -32.724, 79.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -32.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 8, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -88.449, -26.724, 54.4 ], "BBoxMm": [ -93.949, -26.724, 49.637, -82.949, -26.724, 59.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 9, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -84.324, -29.724, 56.782 ], "BBoxMm": [ -85.699, -32.724, 54.4, -82.949, -26.724, 59.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -82.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 10, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -84.324, -29.724, 52.019 ], "BBoxMm": [ -85.699, -32.724, 49.637, -82.949, -26.724, 54.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -85.699, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 11, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -88.449, -29.724, 49.637 ], "BBoxMm": [ -91.199, -32.724, 49.637, -85.699, -26.724, 49.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -91.199, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 12, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -92.574, -29.724, 52.019 ], "BBoxMm": [ -93.949, -32.724, 49.637, -91.199, -26.724, 54.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -93.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 13, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -92.574, -29.724, 56.782 ], "BBoxMm": [ -93.949, -32.724, 54.4, -91.199, -26.724, 59.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -91.199, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 14, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -88.449, -29.724, 59.164 ], "BBoxMm": [ -91.199, -32.724, 59.164, -85.699, -26.724, 59.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -85.699, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 15, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -108.449, -26.724, 54.4 ], "BBoxMm": [ -113.949, -26.724, 49.637, -102.949, -26.724, 59.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 16, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -108.449, -29.724, 59.164 ], "BBoxMm": [ -111.199, -32.724, 59.164, -105.699, -26.724, 59.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -105.699, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 17, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -104.324, -29.724, 56.782 ], "BBoxMm": [ -105.699, -32.724, 54.4, -102.949, -26.724, 59.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -102.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 18, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -104.324, -29.724, 52.019 ], "BBoxMm": [ -105.699, -32.724, 49.637, -102.949, -26.724, 54.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -105.699, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 19, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -108.449, -29.724, 49.637 ], "BBoxMm": [ -111.199, -32.724, 49.637, -105.699, -26.724, 49.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -111.199, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 20, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -112.574, -29.724, 52.019 ], "BBoxMm": [ -113.949, -32.724, 49.637, -111.199, -26.724, 54.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -113.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 21, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -112.574, -29.724, 56.782 ], "BBoxMm": [ -113.949, -32.724, 54.4, -111.199, -26.724, 59.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -111.199, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 22, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -98.449, -26.724, 64.4 ], "BBoxMm": [ -103.949, -26.724, 59.637, -92.949, -26.724, 69.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 23, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 69.164 ], "BBoxMm": [ -101.199, -32.724, 69.164, -95.699, -26.724, 69.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -95.699, -26.724, 69.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 24, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 66.782 ], "BBoxMm": [ -95.699, -32.724, 64.4, -92.949, -26.724, 69.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -92.949, -26.724, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 25, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 62.019 ], "BBoxMm": [ -95.699, -32.724, 59.637, -92.949, -26.724, 64.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -95.699, -26.724, 59.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 26, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 59.637 ], "BBoxMm": [ -101.199, -32.724, 59.637, -95.699, -26.724, 59.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -101.199, -26.724, 59.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 27, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 62.019 ], "BBoxMm": [ -103.949, -32.724, 59.637, -101.199, -26.724, 64.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -103.949, -26.724, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 28, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 66.782 ], "BBoxMm": [ -103.949, -32.724, 64.4, -101.199, -26.724, 69.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -101.199, -26.724, 69.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 29, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -98.449, -26.724, 44.4 ], "BBoxMm": [ -103.949, -26.724, 39.637, -92.949, -26.724, 49.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 30, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 39.637 ], "BBoxMm": [ -101.199, -32.724, 39.637, -95.699, -26.724, 39.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -101.199, -26.724, 39.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 31, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 42.019 ], "BBoxMm": [ -103.949, -32.724, 39.637, -101.199, -26.724, 44.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -103.949, -26.724, 44.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 32, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 46.782 ], "BBoxMm": [ -103.949, -32.724, 44.4, -101.199, -26.724, 49.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -101.199, -26.724, 49.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 33, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 49.164 ], "BBoxMm": [ -101.199, -32.724, 49.164, -95.699, -26.724, 49.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -95.699, -26.724, 49.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 34, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 46.782 ], "BBoxMm": [ -95.699, -32.724, 44.4, -92.949, -26.724, 49.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -92.949, -26.724, 44.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 35, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 42.019 ], "BBoxMm": [ -95.699, -32.724, 39.637, -92.949, -26.724, 44.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -95.699, -26.724, 39.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" } ], "image_views": [ { "ImageKind": "assembly_component_highlight_view", "RequestedView": "best_oblique", "ViewName": "highlight_component_39_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "assembly_context_highlight_component_39", "HighlightComponentId": "component_39", "HighlightComponentInstanceName": "轴承与连接臂连接件-1", "HighlightComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 1, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_highlights\\component_39\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with whole component selected using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=1; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:06.5524124+08:00", "CompletedAt": "2026-07-09T14:23:10.9875082+08:00" }, { "ImageKind": "assembly_interface_face_pair_highlight_view", "RequestedView": "best_oblique", "ViewName": "interface_highlight_contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "interface_highlight_contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11", "HighlightComponentId": "component_39", "HighlightComponentInstanceName": "轴承与连接臂连接件-1", "HighlightComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11", "HighlightInterfaceContactKind": "planar_face_contact_candidate", "HighlightInterfaceMateRole": "planar_mating_face", "HighlightInterfaceComponentAId": "component_39", "HighlightInterfaceComponentAInstanceName": "轴承与连接臂连接件-1", "HighlightInterfaceComponentADisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "HighlightInterfaceComponentBId": "component_41", "HighlightInterfaceComponentBInstanceName": "小臂外壳1-1", "HighlightInterfaceComponentBDisplayName": "小臂外壳1-1 (小臂外壳1)", "HighlightFaceRefs": [ "轴承与连接臂连接件-1:face#6", "小臂外壳1-1:face#11" ], "HighlightViewDirectionMm": [ 3.1579677144893343E-16, 1, 0 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 2, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\interface_highlights\\contact_轴承与连接臂连接件_1_face_6__小臂外壳1_1_face_11\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved with assembly interface face pair selected; selected_faces=2; custom_oblique_view_applied=True; native_highlight_drawn=True; visibility_context_applied=True; hidden=40; preserved_context=0; model not saved", "Error": "", "StartedAt": "2026-07-09T14:23:16.2979674+08:00", "CompletedAt": "2026-07-09T14:23:22.016914+08:00" }, { "ImageKind": "assembly_component_context_isolate_view", "RequestedView": "best_oblique", "ViewName": "context_component_39_best_oblique", "SolidWorksNamedView": "custom_oblique", "SolidWorksViewId": 0, "SectionPlaneKey": "", "SectionPlaneName": "", "SectionOffsetMm": 0, "SectionTarget": "", "SectionReason": "", "HighlightPlanId": "internal_context_group_4_component_39_target_component_39", "HighlightComponentId": "component_39", "HighlightComponentInstanceName": "轴承与连接臂连接件-1", "HighlightComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "HighlightFeatureId": "", "HighlightFeatureType": "", "HighlightInterfaceId": "", "HighlightInterfaceContactKind": "", "HighlightInterfaceMateRole": "", "HighlightInterfaceComponentAId": "", "HighlightInterfaceComponentAInstanceName": "", "HighlightInterfaceComponentADisplayName": "", "HighlightInterfaceComponentBId": "", "HighlightInterfaceComponentBInstanceName": "", "HighlightInterfaceComponentBDisplayName": "", "HighlightFaceRefs": [], "HighlightViewDirectionMm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "HighlightBlockingFaceRefs": [], "ContextShownComponentCount": 1, "Ok": true, "OutputPath": "D:\\CSharpProjects\\agent4\\runtime\\brep_semantic_bridge\\小臂肘关节\\extractions\\primary_y\\model_images\\component_contexts\\component_39\\best_oblique.jpg", "SaveErrors": 0, "SaveWarnings": 0, "Message": "saved after temporary hide/show context isolation using SolidWorks native selection highlight; custom_oblique_view_applied=True; native_highlight_drawn=True; effective_direction=[0.577,-0.577,-0.577]; model not saved", "Error": "", "StartedAt": "2026-07-09T14:28:55.7286957+08:00", "CompletedAt": "2026-07-09T14:28:58.0717602+08:00" } ], "counts": { "features": 4, "faces": 35, "image_views": 3 } } ] }