{ "schema": "component_image_evidence_v1", "component_id": "component_42", "selection_policy": "Post-functional-group part-level checking uses only all-face highlight images generated under functional_group_evidence//all_face_highlights. Initial extraction images and part_check reused images are excluded.", "target_part_image_plan": { "excluded": true, "reason": "Initial extraction or direct part image plans are not allowed in the post-functional-group part-level checking stage." }, "target_part_check_evidence": { "component_id": "component_42", "instance_name": "轴承与连接臂连接件-1", "display_name": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_42", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_42\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_42/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_6", "Type": "hole_group", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#1", "轴承与连接臂连接件-1:face#2", "轴承与连接臂连接件-1:face#3", "轴承与连接臂连接件-1:face#4" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 3, "diameter_mm": 6, "axis": [ -0, 1, -0 ], "center_points_mm": [ [ -98.449, -25.224, 44.4 ], [ -98.449, -25.224, 64.4 ], [ -108.449, -25.224, 54.4 ], [ -88.449, -25.224, 54.4 ] ], "entry_face_candidate_refs": [ "电机与大臂外壳连接件1-1:face#24", "电机与大臂外壳连接件3-1:face#1", "电机与大臂外壳连接件1-1:face#57", "GB／T276-94深沟球轴承61810-2Z-1:face#210" ], "member_count": 4, "pattern_type": "parallel_circular_hole_pattern", "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution", "pattern_plane_normal": [ -0, 1, -0 ], "pattern_plane_t_mm": -25.224, "pattern_center_mm": [ -98.449, -25.224, 54.4 ], "pattern_radius_mm": 10, "spacing_mm": 14.142 } }, { "Id": "cylindrical_surface_group_19", "Type": "main_axis_cylindrical_surface_group", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#5" ], "Confidence": 0.7, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "bearing_or_hinge_seat_candidate", "internal_cylindrical_surface_candidate", "shell_arc_candidate" ], "VisualObservationNeeds": [ "confirm_internal_or_external_side_from_images", "confirm_if_surface_looks_like_precision_seat_or_cast_shell" ], "RequiredBrepChecks": [ "internal_external_classification", "tool_access_direction_and_surrounding_wall_clearance", "surface_continuity_and_interruption" ], "Geometry": { "radius_mm": 25, "diameter_mm": 50, "axis": [ 0, -1, 0 ], "axis_point_mm": [ -98.449, -23.724, 54.4 ], "total_area_mm2": 1413.717, "member_count": 1 } }, { "Id": "planar_surface_candidate_7", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#6" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1850.398, "normal": [ -0, 1, -0 ], "center_mm": [ -98.449, -23.724, 54.4 ], "bbox_mm": [ -123.449, -23.724, 29.4, -73.449, -23.724, 79.4 ] } }, { "Id": "planar_surface_candidate_9", "Type": "planar_pad_step_or_face_candidate", "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "FaceRefs": [ "轴承与连接臂连接件-1:face#7" ], "Confidence": 0.62, "Source": "brep_plane_face", "PossibleFunctions": [ "mounting_pad_candidate", "step_face_candidate", "datum_or_machined_face_candidate" ], "VisualObservationNeeds": [ "confirm_whether_face_is_visible_as_real_plane_or_projection", "confirm_if_face_contacts_other_parts_or appears as mounting pad" ], "RequiredBrepChecks": [ "adjacency_to_nonmachined_regions", "contact_or_fit_evidence", "local_height_difference_to_surrounding_faces" ], "Geometry": { "area_mm2": 1649.128, "normal": [ -0, 1, -0 ], "center_mm": [ -98.449, -32.724, 54.4 ], "bbox_mm": [ -123.449, -32.724, 29.4, -73.449, -32.724, 79.4 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -98.449, -25.224, 44.4 ], "BBoxMm": [ -101.449, -26.724, 41.4, -95.449, -23.724, 47.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -32.724, 44.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 2, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -98.449, -25.224, 64.4 ], "BBoxMm": [ -101.449, -26.724, 61.4, -95.449, -23.724, 67.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -32.724, 64.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -108.449, -25.224, 54.4 ], "BBoxMm": [ -111.449, -26.724, 51.4, -105.449, -23.724, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -108.449, -32.724, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 4, "FaceKind": "cylinder", "AreaMm2": 56.549, "CenterMm": [ -88.449, -25.224, 54.4 ], "BBoxMm": [ -91.449, -26.724, 51.4, -85.449, -23.724, 57.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -88.449, -32.724, 54.4 ], "Axis": [ -0, 1, -0 ], "RadiusMm": 3, "DiameterMm": 6, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 5, "FaceKind": "cylinder", "AreaMm2": 1413.717, "CenterMm": [ -98.449, -28.224, 54.4 ], "BBoxMm": [ -123.449, -32.724, 29.4, -73.449, -23.724, 79.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -23.724, 54.4 ], "Axis": [ 0, -1, 0 ], "RadiusMm": 25, "DiameterMm": 50, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 6, "FaceKind": "plane", "AreaMm2": 1850.398, "CenterMm": [ -98.449, -23.724, 54.4 ], "BBoxMm": [ -123.449, -23.724, 29.4, -73.449, -23.724, 79.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -23.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 7, "FaceKind": "plane", "AreaMm2": 1649.128, "CenterMm": [ -98.449, -32.724, 54.4 ], "BBoxMm": [ -123.449, -32.724, 29.4, -73.449, -32.724, 79.4 ], "Normal": [ -0, 1, -0 ], "RootPointMm": [ -98.449, -32.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 8, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -88.449, -26.724, 54.4 ], "BBoxMm": [ -93.949, -26.724, 49.637, -82.949, -26.724, 59.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 9, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -84.324, -29.724, 56.782 ], "BBoxMm": [ -85.699, -32.724, 54.4, -82.949, -26.724, 59.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -82.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 10, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -84.324, -29.724, 52.019 ], "BBoxMm": [ -85.699, -32.724, 49.637, -82.949, -26.724, 54.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -85.699, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 11, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -88.449, -29.724, 49.637 ], "BBoxMm": [ -91.199, -32.724, 49.637, -85.699, -26.724, 49.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -91.199, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 12, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -92.574, -29.724, 52.019 ], "BBoxMm": [ -93.949, -32.724, 49.637, -91.199, -26.724, 54.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -93.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 13, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -92.574, -29.724, 56.782 ], "BBoxMm": [ -93.949, -32.724, 54.4, -91.199, -26.724, 59.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -91.199, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 14, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -88.449, -29.724, 59.164 ], "BBoxMm": [ -91.199, -32.724, 59.164, -85.699, -26.724, 59.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -85.699, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 15, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -108.449, -26.724, 54.4 ], "BBoxMm": [ -113.949, -26.724, 49.637, -102.949, -26.724, 59.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 16, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -108.449, -29.724, 59.164 ], "BBoxMm": [ -111.199, -32.724, 59.164, -105.699, -26.724, 59.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -105.699, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 17, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -104.324, -29.724, 56.782 ], "BBoxMm": [ -105.699, -32.724, 54.4, -102.949, -26.724, 59.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -102.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 18, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -104.324, -29.724, 52.019 ], "BBoxMm": [ -105.699, -32.724, 49.637, -102.949, -26.724, 54.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -105.699, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 19, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -108.449, -29.724, 49.637 ], "BBoxMm": [ -111.199, -32.724, 49.637, -105.699, -26.724, 49.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -111.199, -26.724, 49.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 20, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -112.574, -29.724, 52.019 ], "BBoxMm": [ -113.949, -32.724, 49.637, -111.199, -26.724, 54.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -113.949, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 21, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -112.574, -29.724, 56.782 ], "BBoxMm": [ -113.949, -32.724, 54.4, -111.199, -26.724, 59.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -111.199, -26.724, 59.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 22, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -98.449, -26.724, 64.4 ], "BBoxMm": [ -103.949, -26.724, 59.637, -92.949, -26.724, 69.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 23, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 69.164 ], "BBoxMm": [ -101.199, -32.724, 69.164, -95.699, -26.724, 69.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -95.699, -26.724, 69.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 24, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 66.782 ], "BBoxMm": [ -95.699, -32.724, 64.4, -92.949, -26.724, 69.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -92.949, -26.724, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 25, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 62.019 ], "BBoxMm": [ -95.699, -32.724, 59.637, -92.949, -26.724, 64.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -95.699, -26.724, 59.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 26, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 59.637 ], "BBoxMm": [ -101.199, -32.724, 59.637, -95.699, -26.724, 59.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -101.199, -26.724, 59.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 27, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 62.019 ], "BBoxMm": [ -103.949, -32.724, 59.637, -101.199, -26.724, 64.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -103.949, -26.724, 64.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 28, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 66.782 ], "BBoxMm": [ -103.949, -32.724, 64.4, -101.199, -26.724, 69.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -101.199, -26.724, 69.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 29, "FaceKind": "plane", "AreaMm2": 50.317, "CenterMm": [ -98.449, -26.724, 44.4 ], "BBoxMm": [ -103.949, -26.724, 39.637, -92.949, -26.724, 49.164 ], "Normal": [ 0, -1, 0 ], "RootPointMm": [ -98.449, -26.724, 54.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 30, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 39.637 ], "BBoxMm": [ -101.199, -32.724, 39.637, -95.699, -26.724, 39.637 ], "Normal": [ 0, -0, -1 ], "RootPointMm": [ -101.199, -26.724, 39.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 31, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 42.019 ], "BBoxMm": [ -103.949, -32.724, 39.637, -101.199, -26.724, 44.4 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -103.949, -26.724, 44.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 32, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -102.574, -29.724, 46.782 ], "BBoxMm": [ -103.949, -32.724, 44.4, -101.199, -26.724, 49.164 ], "Normal": [ -0.866, 0, 0.5 ], "RootPointMm": [ -101.199, -26.724, 49.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 33, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -98.449, -29.724, 49.164 ], "BBoxMm": [ -101.199, -32.724, 49.164, -95.699, -26.724, 49.164 ], "Normal": [ -0, 0, 1 ], "RootPointMm": [ -95.699, -26.724, 49.164 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 34, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 46.782 ], "BBoxMm": [ -95.699, -32.724, 44.4, -92.949, -26.724, 49.164 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -92.949, -26.724, 44.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "轴承与连接臂连接件-1", "ComponentDisplayName": "轴承与连接臂连接件-1 (轴承与连接臂连接件)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\轴承与连接臂连接件.SLDPRT", "ComponentFileName": "轴承与连接臂连接件.SLDPRT", "ComponentCategory": "shaft", "FaceIndex": 35, "FaceKind": "plane", "AreaMm2": 33, "CenterMm": [ -94.324, -29.724, 42.019 ], "BBoxMm": [ -95.699, -32.724, 39.637, -92.949, -26.724, 44.4 ], "Normal": [ 0.866, -0, -0.5 ], "RootPointMm": [ -95.699, -26.724, 39.637 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" } ], "counts": { "features": 4, "faces": 35, "image_views": 2 }, "image_policy": "All initial extraction images and part_check reused images are excluded from the post-functional-group part-level checking stage. Use available_target_images with image_kind=functional_group_all_face_highlight only." }, "target_context_image_plans": [], "available_target_images": [ { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_42/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_42_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_42", "highlight_component_id": "component_42", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_42\\best_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/component_contexts/component_42/best_oblique.jpg", "image_kind": "assembly_component_context_isolate_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "occluded_context", "view_name": "context_component_42_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "internal_context_group_38_component_42_target_component_42", "highlight_component_id": "component_42", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ -0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_contexts\\component_42\\best_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_42/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_42_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_42", "highlight_component_id": "component_42", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_42\\best_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/component_contexts/component_42/best_oblique.jpg", "image_kind": "assembly_component_context_isolate_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "occluded_context", "view_name": "context_component_42_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "internal_context_group_38_component_42_target_component_42", "highlight_component_id": "component_42", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ -0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_contexts\\component_42\\best_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" } ] }