{ "schema": "component_image_evidence_v1", "component_id": "component_3", "selection_policy": "Post-functional-group part-level checking uses only all-face highlight images generated under functional_group_evidence//all_face_highlights. Initial extraction images and part_check reused images are excluded.", "target_part_image_plan": { "excluded": true, "reason": "Initial extraction or direct part image plans are not allowed in the post-functional-group part-level checking stage." }, "target_part_check_evidence": { "component_id": "component_3", "instance_name": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "display_name": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "status": "ok", "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.", "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_3", "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\section_brep_report.json", "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_3\\reused_part_check_evidence.json", "image_namespace": "part_check_extractions/component_3/reused_image_refs", "source_image_namespace": "extractions/primary_y/model_images", "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.", "feature_graph": { "schema": "reused_component_feature_graph_subset_v1", "source": "initial_assembly_extraction.FeatureGraph", "features": [ { "Id": "hole_group_1", "Type": "hole_feature", "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1:face#1" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 1.5, "diameter_mm": 3, "axis": [ 0, -1, -0 ], "center_points_mm": [ [ -98.449, -70.748, 75.9 ] ], "entry_face_candidate_refs": [ "电机与大臂外壳连接件3-1:face#8", "电机与大臂外壳连接件3-1:face#25", "电机与大臂外壳连接件3-1:face#27", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#410" ], "member_count": 1, "pattern_type": "single_hole_candidate", "grouping_basis": "fallback same component, axis direction, and diameter", "pattern_plane_normal": [ 0, -1, -0 ], "pattern_center_mm": [ -98.449, -70.748, 75.9 ] } }, { "Id": "hole_group_11", "Type": "hole_feature", "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "FaceRefs": [ "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1:face#3" ], "Confidence": 0.74, "Source": "brep_cylinder_grouping", "PossibleFunctions": [ "fastener_hole_candidate", "port_or_pin_hole_candidate" ], "VisualObservationNeeds": [ "confirm_hole_entry_location_in_model_images", "confirm_whether_entry_has_flat_pad_or_spotface", "confirm_whether_hole_is_internal_external_or_edge_near" ], "RequiredBrepChecks": [ "entry_face_normal_vs_hole_axis_angle", "hole_throughness_or_blind_depth", "minimum_edge_clearance_to_neighbor_boundaries", "spotface_or_counterbore_detection", "hole_pattern_grouping_by_center_parameters" ], "Geometry": { "radius_mm": 2.75, "diameter_mm": 5.5, "axis": [ 0, -1, -0 ], "center_points_mm": [ [ -98.449, -78.173, 75.9 ] ], "entry_face_candidate_refs": [ "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1:face#12", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#12", "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-2:face#12", "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/WG_CSG_SHG-20_C_8_WG1044040-1:face#30" ], "member_count": 1, "pattern_type": "single_hole_candidate", "grouping_basis": "fallback same component, axis direction, and diameter", "pattern_plane_normal": [ 0, -1, -0 ], "pattern_center_mm": [ -98.449, -78.173, 75.9 ] } } ], "relations": [] }, "faces": [ { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 1, "FaceKind": "cylinder", "AreaMm2": 108.856, "CenterMm": [ -98.449, -70.748, 75.9 ], "BBoxMm": [ -99.949, -76.523, 74.4, -96.949, -64.973, 77.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -79.723, 75.9 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 1.5, "DiameterMm": 3, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 2, "FaceKind": "plane", "AreaMm2": 16.712, "CenterMm": [ -98.449, -79.723, 75.9 ], "BBoxMm": [ -101.099, -79.723, 73.25, -95.799, -79.723, 78.55 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -98.449, -79.723, 75.9 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 3, "FaceKind": "cylinder", "AreaMm2": 50.108, "CenterMm": [ -98.449, -78.173, 75.9 ], "BBoxMm": [ -101.199, -79.623, 73.15, -95.699, -76.723, 78.65 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [ -98.449, -79.723, 75.9 ], "Axis": [ 0, -1, -0 ], "RadiusMm": 2.75, "DiameterMm": 5.5, "OrientationRole": "shaft_axis_cylindrical_face", "FunctionalRole": "cylindrical_feature", "SurfaceProcessRole": "machined_feature_candidate", "ProcessConfidence": "low", "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed", "MachiningScope": "feature_surface" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 4, "FaceKind": "plane", "AreaMm2": 14.679, "CenterMm": [ -98.449, -76.723, 75.9 ], "BBoxMm": [ -101.199, -76.723, 73.15, -95.699, -76.723, 78.65 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -98.449, -76.723, 78.65 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "machined_surface_candidate", "ProcessConfidence": "medium", "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation", "MachiningScope": "contact_patch_unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 5, "FaceKind": "other", "AreaMm2": 3.104, "CenterMm": [ -98.449, -76.623, 75.9 ], "BBoxMm": [ -100.149, -76.723, 74.2, -96.749, -76.523, 77.6 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "unknown", "FunctionalRole": "unknown", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 6, "FaceKind": "plane", "AreaMm2": 1.866, "CenterMm": [ -97.373, -79.073, 75.279 ], "BBoxMm": [ -97.731, -79.723, 74.658, -97.014, -78.423, 75.9 ], "Normal": [ 0.866, 0, -0.5 ], "RootPointMm": [ -97.731, -78.423, 74.658 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 7, "FaceKind": "plane", "AreaMm2": 1.866, "CenterMm": [ -98.449, -79.073, 74.658 ], "BBoxMm": [ -99.166, -79.723, 74.658, -97.731, -78.423, 74.658 ], "Normal": [ -0, 0, -1 ], "RootPointMm": [ -99.166, -78.423, 74.658 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "downward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 8, "FaceKind": "plane", "AreaMm2": 1.866, "CenterMm": [ -99.525, -79.073, 75.279 ], "BBoxMm": [ -99.884, -79.723, 74.658, -99.166, -78.423, 75.9 ], "Normal": [ -0.866, -0, -0.5 ], "RootPointMm": [ -99.884, -78.423, 75.9 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 9, "FaceKind": "plane", "AreaMm2": 1.866, "CenterMm": [ -99.525, -79.073, 76.522 ], "BBoxMm": [ -99.884, -79.723, 75.9, -99.166, -78.423, 77.143 ], "Normal": [ -0.866, -0, 0.5 ], "RootPointMm": [ -99.166, -78.423, 77.143 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 10, "FaceKind": "plane", "AreaMm2": 1.865, "CenterMm": [ -98.449, -79.073, 77.143 ], "BBoxMm": [ -99.166, -79.723, 77.143, -97.731, -78.423, 77.143 ], "Normal": [ 0, -0, 1 ], "RootPointMm": [ -97.731, -78.423, 77.143 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "upward_facing_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 11, "FaceKind": "plane", "AreaMm2": 1.866, "CenterMm": [ -97.373, -79.073, 76.522 ], "BBoxMm": [ -97.731, -79.723, 75.9, -97.014, -78.423, 77.143 ], "Normal": [ 0.866, 0, 0.5 ], "RootPointMm": [ -97.014, -78.423, 75.9 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "side_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 12, "FaceKind": "plane", "AreaMm2": 5.35, "CenterMm": [ -98.449, -78.423, 75.9 ], "BBoxMm": [ -99.884, -78.423, 74.658, -97.014, -78.423, 77.143 ], "Normal": [ -0, 1, 0 ], "RootPointMm": [ -97.731, -78.423, 74.658 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 13, "FaceKind": "other", "AreaMm2": 4.032, "CenterMm": [ -98.449, -64.848, 75.9 ], "BBoxMm": [ -99.949, -64.973, 74.4, -96.949, -64.723, 77.4 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "unknown", "FunctionalRole": "unknown", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 14, "FaceKind": "plane", "AreaMm2": 3.577, "CenterMm": [ -98.449, -64.723, 75.9 ], "BBoxMm": [ -99.516, -64.723, 74.833, -97.382, -64.723, 76.967 ], "Normal": [ 0, -1, -0 ], "RootPointMm": [ -98.449, -64.723, 77.4 ], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "axial_end_face", "FunctionalRole": "planar_feature", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" }, { "ComponentName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1", "ComponentDisplayName": "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-1 (GB／T70．1-2000内六角圆柱头螺钉M3×12)", "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\螺栓连接件\\GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentFileName": "GB／T70．1-2000内六角圆柱头螺钉M3×12.SLDPRT", "ComponentCategory": "unknown", "FaceIndex": 15, "FaceKind": "other", "AreaMm2": 2.678, "CenterMm": [ -98.449, -79.673, 75.9 ], "BBoxMm": [ -101.199, -79.723, 73.15, -95.699, -79.623, 78.65 ], "Normal": [], "RootPointMm": [], "AxisPointMm": [], "Axis": [], "RadiusMm": 0, "DiameterMm": 0, "OrientationRole": "unknown", "FunctionalRole": "unknown", "SurfaceProcessRole": "unknown_process_surface", "ProcessConfidence": "low", "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence", "MachiningScope": "unknown" } ], "counts": { "features": 2, "faces": 15, "image_views": 9 }, "image_policy": "All initial extraction images and part_check reused images are excluded from the post-functional-group part-level checking stage. Use available_target_images with image_kind=functional_group_all_face_highlight only." }, "target_context_image_plans": [], "available_target_images": [ { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_37/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_37_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_37", "highlight_component_id": "component_37", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_37\\best_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_38/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_38_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_38", "highlight_component_id": "component_38", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_38\\best_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#408", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#424", "电机与大臂外壳连接件3-1:face#5" ], "physical_interface_id": "physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_408__电机与大臂外壳连接件3_1_face_5", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_424__电机与大臂外壳连接件3_1_face_5" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -90.949, -58.198, 61.900000000000006 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -33.723, 84.4 ], "interface_analysis_priority": 48.3, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 2, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#412", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#425", "电机与大臂外壳连接件3-1:face#5" ], "physical_interface_id": "physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_412__电机与大臂外壳连接件3_1_face_5", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_425__电机与大臂外壳连接件3_1_face_5" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -105.949, -58.198, 61.900000000000006 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -33.723, 84.4 ], "interface_analysis_priority": 48.3, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 2, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ -0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1", "highlight_component_id": "component_6", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/CSG-20-50-2A-GR-MHC_b-1:face#64", "电机与大臂外壳连接件1-1:face#31" ], "physical_interface_id": "physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_CSG_20_160_2A_SP_C_8_WG1044040_MHC_1_CSG_20_50_2A_GR_MHC_b_1_face_64__电机与大臂外壳连接件1_1_face_31" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -90.0755, 45.65 ], "interface_bbox_mm": [ -147.523, -112.634, 5.326, -49.375, -76.723, 103.474 ], "interface_analysis_priority": 47.26, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_002_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_002_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_002_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件3", "highlight_component_id": "component_6", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/CSG-20-50-2A-GR-MHC_b-1:face#64", "电机与大臂外壳连接件3-1:face#9" ], "physical_interface_id": "physical_interface_002_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_CSG_20_160_2A_SP_C_8_WG1044040_MHC_1_CSG_20_50_2A_GR_MHC_b_1_face_64__电机与大臂外壳连接件3_1_face_9" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -90.0755, 63.150000000000006 ], "interface_bbox_mm": [ -147.523, -112.634, 5.326, -49.375, -76.723, 103.474 ], "interface_analysis_priority": 47.26, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_002_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件3\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#408", "电机与大臂外壳连接件1-1:face#4" ], "physical_interface_id": "physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_408__电机与大臂外壳连接件1_1_face_4" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -90.949, -68.368, 46.9 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -64.023, 84.4 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#412", "电机与大臂外壳连接件1-1:face#4" ], "physical_interface_id": "physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_412__电机与大臂外壳连接件1_1_face_4" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -105.949, -68.368, 46.9 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -64.023, 84.4 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ -0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6", "电机与大臂外壳连接件1-1:face#31" ], "physical_interface_id": "physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件1_1_face_31" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -86.9505, 45.65 ], "interface_bbox_mm": [ -146.26, -112.634, 6.59, -50.638, -76.723, 102.211 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24", "电机与大臂外壳连接件1-1:face#33" ], "physical_interface_id": "physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件1_1_face_33" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -74.223, 48.15 ], "interface_bbox_mm": [ -132.599, -76.723, 20.25, -64.298, -71.723, 88.551 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6", "电机与大臂外壳连接件3-1:face#9" ], "physical_interface_id": "physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件3_1_face_9" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -86.9505, 63.150000000000006 ], "interface_bbox_mm": [ -146.26, -112.634, 6.59, -50.638, -76.723, 102.211 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_010_小臂电机减速器连接法兰__电机与大臂外壳连接件3\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "highlight_component_id": "component_2", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24", "电机与大臂外壳连接件3-1:face#14" ], "physical_interface_id": "physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件3_1_face_14" ], "interface_axis_mm": [ -0, 1, -0 ], "interface_center_mm": [ -98.449, -74.223, 60.650000000000006 ], "interface_bbox_mm": [ -132.599, -76.723, 20.25, -64.298, -71.723, 88.551 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_011_小臂电机减速器连接法兰__电机与大臂外壳连接件3\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#148", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#174", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#194", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#410", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#116", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#432", "电机与大臂外壳连接件1-1:face#10", "电机与大臂外壳连接件1-1:face#34", "电机与大臂外壳连接件1-1:face#29" ], "physical_interface_id": "physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_148__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_174__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_194__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_410__电机与大臂外壳连接件1_1_face_34", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_116__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_432__电机与大臂外壳连接件1_1_face_29" ], "interface_axis_mm": [], "interface_center_mm": [ -98.43233333333332, -59.422999999999995, 25.145833333333332 ], "interface_bbox_mm": [ -138.449, -108.723, 14.4, -58.449, -28.723, 84.1 ], "interface_analysis_priority": 35.4, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_interface_confirmed", "interface_verification_methods": [ "planar_tessellated_trimmed_domain_intersection" ], "interface_verification_sample_hits": 6, "interface_verification_min_distance_mm": 26005.1772, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/component_contexts/component_39/best_oblique.jpg", "image_kind": "assembly_component_context_isolate_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "occluded_context", "view_name": "context_component_39_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "internal_context_group_1_component_39_target_component_39", "highlight_component_id": "component_39", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ -0.5773502691896258, -0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_contexts\\component_39\\best_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/component_contexts/component_38/best_oblique.jpg", "image_kind": "assembly_component_context_isolate_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "occluded_context", "view_name": "context_component_38_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "internal_context_group_26_component_6_target_component_38", "highlight_component_id": "component_38", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_contexts\\component_38\\best_oblique.jpg" }, { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_37/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_37_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_37", "highlight_component_id": "component_37", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_37\\best_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/component_highlights/component_38/best_oblique.jpg", "image_kind": "assembly_component_highlight_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "unobstructed", "view_name": "highlight_component_38_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "assembly_context_highlight_component_38", "highlight_component_id": "component_38", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_38\\best_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#408", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#424", "电机与大臂外壳连接件3-1:face#5" ], "physical_interface_id": "physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_408__电机与大臂外壳连接件3_1_face_5", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_424__电机与大臂外壳连接件3_1_face_5" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -90.949, -58.198, 61.900000000000006 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -33.723, 84.4 ], "interface_analysis_priority": 48.3, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 2, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_006_EC60fl_150W_V2_stp__电机与大臂外壳连接件3\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#412", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#425", "电机与大臂外壳连接件3-1:face#5" ], "physical_interface_id": "physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_412__电机与大臂外壳连接件3_1_face_5", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_425__电机与大臂外壳连接件3_1_face_5" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -105.949, -58.198, 61.900000000000006 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -33.723, 84.4 ], "interface_analysis_priority": 48.3, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 2, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ -0.5773502691896258, 0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_007_EC60fl_150W_V2_stp__电机与大臂外壳连接件3\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#408", "电机与大臂外壳连接件1-1:face#4" ], "physical_interface_id": "physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_408__电机与大臂外壳连接件1_1_face_4" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -90.949, -68.368, 46.9 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -64.023, 84.4 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#412", "电机与大臂外壳连接件1-1:face#4" ], "physical_interface_id": "physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_412__电机与大臂外壳连接件1_1_face_4" ], "interface_axis_mm": [ -0, 1, 0 ], "interface_center_mm": [ -105.949, -68.368, 46.9 ], "interface_bbox_mm": [ -128.449, -71.723, 24.4, -68.449, -64.023, 84.4 ], "interface_analysis_priority": 47.2, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_cylindrical_domain_confirmed", "interface_verification_methods": [ "cylindrical_trimmed_face_2mm_slice_angular_intersection" ], "interface_verification_sample_hits": 1, "interface_verification_min_distance_mm": 0, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ -0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg", "image_kind": "assembly_physical_interface_view", "evidence_family": "assembly_physical_interface", "evidence_purpose": "contact_and_fit_function_analysis", "position_visibility": "interface_isolated", "view_name": "interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique", "requested_view": "assembled_oblique", "highlight_plan_id": "physical_interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "highlight_component_id": "component_35", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [ "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#148", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#174", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#194", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#410", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#116", "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#432", "电机与大臂外壳连接件1-1:face#10", "电机与大臂外壳连接件1-1:face#34", "电机与大臂外壳连接件1-1:face#29" ], "physical_interface_id": "physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1", "source_contact_ids": [ "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_148__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_174__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_194__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_410__电机与大臂外壳连接件1_1_face_34", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_116__电机与大臂外壳连接件1_1_face_10", "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_432__电机与大臂外壳连接件1_1_face_29" ], "interface_axis_mm": [], "interface_center_mm": [ -98.43233333333332, -59.422999999999995, 25.145833333333332 ], "interface_bbox_mm": [ -138.449, -108.723, 14.4, -58.449, -28.723, 84.1 ], "interface_analysis_priority": 35.4, "interface_confidence_tier": "high", "interface_evidence_purpose": "physical_interface_function_analysis", "trimmed_patch_verified": true, "interface_verification_status": "trimmed_interface_confirmed", "interface_verification_methods": [ "planar_tessellated_trimmed_domain_intersection" ], "interface_verification_sample_hits": 6, "interface_verification_min_distance_mm": 26005.1772, "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces", "actual_assembly_position": true, "not_actual_clearance": true, "highlight_view_direction_mm": [ 0.5773502691896258, 0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/component_contexts/component_39/best_oblique.jpg", "image_kind": "assembly_component_context_isolate_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "occluded_context", "view_name": "context_component_39_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "internal_context_group_1_component_39_target_component_39", "highlight_component_id": "component_39", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ -0.5773502691896258, -0.5773502691896258, 0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_contexts\\component_39\\best_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" }, { "evidence_name": "extractions/primary_y/model_images/component_contexts/component_38/best_oblique.jpg", "image_kind": "assembly_component_context_isolate_view", "evidence_family": "assembly_component_position", "evidence_purpose": "component_position_and_whole_component_function", "position_visibility": "occluded_context", "view_name": "context_component_38_best_oblique", "requested_view": "best_oblique", "highlight_plan_id": "internal_context_group_26_component_6_target_component_38", "highlight_component_id": "component_38", "highlight_feature_id": "", "highlight_feature_type": "", "highlight_face_refs": [], "physical_interface_id": "", "source_contact_ids": [], "interface_axis_mm": [], "interface_center_mm": [], "interface_bbox_mm": [], "interface_analysis_priority": 0, "interface_confidence_tier": "", "interface_evidence_purpose": "", "trimmed_patch_verified": false, "interface_verification_status": "", "interface_verification_methods": [], "interface_verification_sample_hits": 0, "interface_verification_min_distance_mm": 0, "interface_display_mode": "", "actual_assembly_position": false, "not_actual_clearance": false, "highlight_view_direction_mm": [ 0.5773502691896258, -0.5773502691896258, -0.5773502691896258 ], "highlight_blocking_face_refs": [], "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_contexts\\component_38\\best_oblique.jpg", "evidence_source": "reused_initial_assembly_extraction", "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output" } ] }