mech-ai/runtime/2/component_evidence/component_37/images.json

{
  "schema": "component_image_evidence_v1",
  "component_id": "component_37",
  "selection_policy": "Post-functional-group part-level checking uses only all-face highlight images generated under functional_group_evidence/<group_id>/all_face_highlights. Initial extraction images and part_check reused images are excluded.",
  "target_part_image_plan": {
    "excluded": true,
    "reason": "Initial extraction or direct part image plans are not allowed in the post-functional-group part-level checking stage."
  },
  "target_part_check_evidence": {
    "component_id": "component_37",
    "instance_name": "电机与大臂外壳连接件1-1",
    "display_name": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
    "component_path": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
    "status": "ok",
    "message": "Part-check evidence was reused from the initial assembly extraction. No per-component B-rep extraction was executed.",
    "output_dir": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_37",
    "source_assembly_report_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\section_brep_report.json",
    "evidence_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\part_check_extractions\\component_37\\reused_part_check_evidence.json",
    "image_namespace": "part_check_extractions/component_37/reused_image_refs",
    "source_image_namespace": "extractions/primary_y/model_images",
    "reuse_policy": "Logical part-check evidence is separated in this manifest, but B-rep and images are filtered from the first extraction result.",
    "feature_graph": {
      "schema": "reused_component_feature_graph_subset_v1",
      "source": "initial_assembly_extraction.FeatureGraph",
      "features": [
        {
          "Id": "hole_group_8",
          "Type": "hole_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#2",
            "电机与大臂外壳连接件1-1:face#3",
            "电机与大臂外壳连接件1-1:face#27",
            "电机与大臂外壳连接件1-1:face#28"
          ],
          "Confidence": 0.74,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "fastener_hole_candidate",
            "port_or_pin_hole_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_hole_entry_location_in_model_images",
            "confirm_whether_entry_has_flat_pad_or_spotface",
            "confirm_whether_hole_is_internal_external_or_edge_near"
          ],
          "RequiredBrepChecks": [
            "entry_face_normal_vs_hole_axis_angle",
            "hole_throughness_or_blind_depth",
            "minimum_edge_clearance_to_neighbor_boundaries",
            "spotface_or_counterbore_detection",
            "hole_pattern_grouping_by_center_parameters"
          ],
          "Geometry": {
            "radius_mm": 3,
            "diameter_mm": 6,
            "axis": [
              -1,
              0,
              0
            ],
            "center_points_mm": [
              [
                -98.449,
                -115.223,
                4.4
              ],
              [
                -51.949,
                -68.723,
                4.4
              ],
              [
                -144.949,
                -68.723,
                4.4
              ],
              [
                -98.449,
                -22.223,
                4.4
              ]
            ],
            "entry_face_candidate_refs": [
              "电机和连接臂连接件-1:face#3",
              "小臂外壳1-1:face#12",
              "电机与大臂外壳连接件1-1:face#58",
              "电机与大臂外壳连接件1-1:face#25",
              "电机与大臂外壳连接件1-1:face#43",
              "电机与大臂外壳连接件3-1:face#38",
              "电机与大臂外壳连接件1-1:face#20",
              "电机与大臂外壳连接件3-1:face#36"
            ],
            "member_count": 4,
            "pattern_type": "radial_circular_hole_pattern",
            "grouping_basis": "same diameter, shared pattern plane, and center-parameter circular distribution",
            "pattern_plane_normal": [
              0,
              0,
              1
            ],
            "pattern_plane_t_mm": 4.4,
            "pattern_center_mm": [
              -98.449,
              -68.723,
              4.4
            ],
            "pattern_radius_mm": 46.5,
            "spacing_mm": 65.761
          }
        },
        {
          "Id": "hole_group_24",
          "Type": "hole_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#15",
            "电机与大臂外壳连接件1-1:face#17"
          ],
          "Confidence": 0.74,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "fastener_hole_candidate",
            "port_or_pin_hole_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_hole_entry_location_in_model_images",
            "confirm_whether_entry_has_flat_pad_or_spotface",
            "confirm_whether_hole_is_internal_external_or_edge_near"
          ],
          "RequiredBrepChecks": [
            "entry_face_normal_vs_hole_axis_angle",
            "hole_throughness_or_blind_depth",
            "minimum_edge_clearance_to_neighbor_boundaries",
            "spotface_or_counterbore_detection",
            "hole_pattern_grouping_by_center_parameters"
          ],
          "Geometry": {
            "radius_mm": 4,
            "diameter_mm": 8,
            "axis": [
              0,
              0,
              1
            ],
            "center_points_mm": [
              [
                -138.449,
                -68.723,
                44.4
              ],
              [
                -58.449,
                -68.723,
                44.4
              ]
            ],
            "entry_face_candidate_refs": [
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#64",
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#50",
              "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-3:face#10",
              "小臂关节装配2-1/GB／T70．1-2000内六角圆柱头螺钉M3×12-2:face#10"
            ],
            "member_count": 2,
            "pattern_type": "coplanar_parallel_hole_pair",
            "grouping_basis": "same diameter, parallel axes, shared axial parameter plane, and center-parameter distribution",
            "pattern_plane_normal": [
              0,
              0,
              1
            ],
            "pattern_plane_t_mm": 44.4,
            "pattern_center_mm": [
              -98.449,
              -68.723,
              44.4
            ],
            "spacing_mm": 80
          }
        },
        {
          "Id": "hole_group_40",
          "Type": "hole_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#35",
            "电机与大臂外壳连接件1-1:face#37",
            "电机与大臂外壳连接件1-1:face#39",
            "电机与大臂外壳连接件1-1:face#41"
          ],
          "Confidence": 0.74,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "fastener_hole_candidate",
            "port_or_pin_hole_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_hole_entry_location_in_model_images",
            "confirm_whether_entry_has_flat_pad_or_spotface",
            "confirm_whether_hole_is_internal_external_or_edge_near"
          ],
          "RequiredBrepChecks": [
            "entry_face_normal_vs_hole_axis_angle",
            "hole_throughness_or_blind_depth",
            "minimum_edge_clearance_to_neighbor_boundaries",
            "spotface_or_counterbore_detection",
            "hole_pattern_grouping_by_center_parameters"
          ],
          "Geometry": {
            "radius_mm": 1.75,
            "diameter_mm": 3.5,
            "axis": [
              -0,
              -1,
              -0
            ],
            "center_points_mm": [
              [
                -73.855,
                -74.723,
                35.529
              ],
              [
                -94.403,
                -74.723,
                23.666
              ],
              [
                -117.32,
                -74.723,
                29.807
              ],
              [
                -129.184,
                -74.723,
                50.354
              ]
            ],
            "entry_face_candidate_refs": [
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#401",
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#392",
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#387",
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#397",
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#382",
              "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#377"
            ],
            "member_count": 4,
            "pattern_type": "coplanar_parallel_hole_pattern",
            "grouping_basis": "same diameter, parallel axes, shared axial parameter plane, and center-parameter distribution",
            "pattern_plane_normal": [
              -0,
              -1,
              -0
            ],
            "pattern_plane_t_mm": 74.723,
            "pattern_center_mm": [
              -103.69,
              -74.723,
              34.839
            ],
            "spacing_mm": 23.726
          }
        },
        {
          "Id": "cylindrical_surface_group_3",
          "Type": "cylindrical_surface_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#8",
            "电机与大臂外壳连接件1-1:face#11"
          ],
          "Confidence": 0.7,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "outer_shell_candidate",
            "boss_or_side_cylindrical_surface_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_internal_or_external_side_from_images",
            "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
          ],
          "RequiredBrepChecks": [
            "internal_external_classification",
            "tool_access_direction_and_surrounding_wall_clearance",
            "surface_continuity_and_interruption"
          ],
          "Geometry": {
            "radius_mm": 55,
            "diameter_mm": 110,
            "axis": [
              -0,
              -0,
              -1
            ],
            "axis_point_mm": [
              -98.449,
              -68.723,
              54.4
            ],
            "total_area_mm2": 7890.17,
            "member_count": 2
          }
        },
        {
          "Id": "cylindrical_surface_group_4",
          "Type": "cylindrical_surface_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#14"
          ],
          "Confidence": 0.7,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "outer_shell_candidate",
            "boss_or_side_cylindrical_surface_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_internal_or_external_side_from_images",
            "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
          ],
          "RequiredBrepChecks": [
            "internal_external_classification",
            "tool_access_direction_and_surrounding_wall_clearance",
            "surface_continuity_and_interruption"
          ],
          "Geometry": {
            "radius_mm": 50,
            "diameter_mm": 100,
            "axis": [
              0,
              0,
              1
            ],
            "axis_point_mm": [
              -98.449,
              -68.723,
              -5.6
            ],
            "total_area_mm2": 6170.076,
            "member_count": 1
          }
        },
        {
          "Id": "cylindrical_surface_group_6",
          "Type": "cylindrical_surface_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#1"
          ],
          "Confidence": 0.7,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "outer_shell_candidate",
            "boss_or_side_cylindrical_surface_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_internal_or_external_side_from_images",
            "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
          ],
          "RequiredBrepChecks": [
            "internal_external_classification",
            "tool_access_direction_and_surrounding_wall_clearance",
            "surface_continuity_and_interruption"
          ],
          "Geometry": {
            "radius_mm": 40,
            "diameter_mm": 80,
            "axis": [
              0,
              0,
              1
            ],
            "axis_point_mm": [
              -98.449,
              -68.723,
              -5.6
            ],
            "total_area_mm2": 4711.558,
            "member_count": 1
          }
        },
        {
          "Id": "cylindrical_surface_group_9",
          "Type": "main_axis_cylindrical_surface_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#31"
          ],
          "Confidence": 0.7,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "bearing_or_hinge_seat_candidate",
            "internal_cylindrical_surface_candidate",
            "shell_arc_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_internal_or_external_side_from_images",
            "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
          ],
          "RequiredBrepChecks": [
            "internal_external_classification",
            "tool_access_direction_and_surrounding_wall_clearance",
            "surface_continuity_and_interruption"
          ],
          "Geometry": {
            "radius_mm": 35,
            "diameter_mm": 70,
            "axis": [
              -0,
              -1,
              -0
            ],
            "axis_point_mm": [
              -98.449,
              -76.723,
              54.4
            ],
            "total_area_mm2": 3339.392,
            "member_count": 1
          }
        },
        {
          "Id": "cylindrical_surface_group_16",
          "Type": "main_axis_cylindrical_surface_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#4",
            "电机与大臂外壳连接件1-1:face#7"
          ],
          "Confidence": 0.7,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "bearing_or_hinge_seat_candidate",
            "internal_cylindrical_surface_candidate",
            "shell_arc_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_internal_or_external_side_from_images",
            "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
          ],
          "RequiredBrepChecks": [
            "internal_external_classification",
            "tool_access_direction_and_surrounding_wall_clearance",
            "surface_continuity_and_interruption"
          ],
          "Geometry": {
            "radius_mm": 30,
            "diameter_mm": 60,
            "axis": [
              0,
              1,
              0
            ],
            "axis_point_mm": [
              -98.449,
              -123.723,
              54.4
            ],
            "total_area_mm2": 1696.46,
            "member_count": 2
          }
        },
        {
          "Id": "cylindrical_surface_group_23",
          "Type": "main_axis_cylindrical_surface_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#30"
          ],
          "Confidence": 0.7,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "bearing_or_hinge_seat_candidate",
            "internal_cylindrical_surface_candidate",
            "shell_arc_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_internal_or_external_side_from_images",
            "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
          ],
          "RequiredBrepChecks": [
            "internal_external_classification",
            "tool_access_direction_and_surrounding_wall_clearance",
            "surface_continuity_and_interruption"
          ],
          "Geometry": {
            "radius_mm": 32.5,
            "diameter_mm": 65,
            "axis": [
              0,
              -1,
              0
            ],
            "axis_point_mm": [
              -98.449,
              -25.723,
              54.4
            ],
            "total_area_mm2": 816.814,
            "member_count": 1
          }
        },
        {
          "Id": "cylindrical_surface_group_28",
          "Type": "main_axis_cylindrical_surface_group",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#33"
          ],
          "Confidence": 0.7,
          "Source": "brep_cylinder_grouping",
          "PossibleFunctions": [
            "bearing_or_hinge_seat_candidate",
            "internal_cylindrical_surface_candidate",
            "shell_arc_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_internal_or_external_side_from_images",
            "confirm_if_surface_looks_like_precision_seat_or_cast_shell"
          ],
          "RequiredBrepChecks": [
            "internal_external_classification",
            "tool_access_direction_and_surrounding_wall_clearance",
            "surface_continuity_and_interruption"
          ],
          "Geometry": {
            "radius_mm": 25,
            "diameter_mm": 50,
            "axis": [
              0,
              -1,
              0
            ],
            "axis_point_mm": [
              -98.449,
              -71.723,
              54.4
            ],
            "total_area_mm2": 392.699,
            "member_count": 1
          }
        },
        {
          "Id": "planar_surface_candidate_3",
          "Type": "planar_pad_step_or_face_candidate",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#10"
          ],
          "Confidence": 0.62,
          "Source": "brep_plane_face",
          "PossibleFunctions": [
            "mounting_pad_candidate",
            "step_face_candidate",
            "datum_or_machined_face_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_whether_face_is_visible_as_real_plane_or_projection",
            "confirm_if_face_contacts_other_parts_or appears as mounting pad"
          ],
          "RequiredBrepChecks": [
            "adjacency_to_nonmachined_regions",
            "contact_or_fit_evidence",
            "local_height_difference_to_surrounding_faces"
          ],
          "Geometry": {
            "area_mm2": 3343.356,
            "normal": [
              0,
              0,
              1
            ],
            "center_mm": [
              -98.449,
              -68.723,
              14.4
            ],
            "bbox_mm": [
              -138.449,
              -108.723,
              14.4,
              -58.449,
              -28.723,
              14.4
            ]
          }
        },
        {
          "Id": "planar_surface_candidate_5",
          "Type": "planar_pad_step_or_face_candidate",
          "ComponentName": "电机与大臂外壳连接件1-1",
          "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
          "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
          "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
          "FaceRefs": [
            "电机与大臂外壳连接件1-1:face#13"
          ],
          "Confidence": 0.62,
          "Source": "brep_plane_face",
          "PossibleFunctions": [
            "mounting_pad_candidate",
            "step_face_candidate",
            "datum_or_machined_face_candidate"
          ],
          "VisualObservationNeeds": [
            "confirm_whether_face_is_visible_as_real_plane_or_projection",
            "confirm_if_face_contacts_other_parts_or appears as mounting pad"
          ],
          "RequiredBrepChecks": [
            "adjacency_to_nonmachined_regions",
            "contact_or_fit_evidence",
            "local_height_difference_to_surrounding_faces"
          ],
          "Geometry": {
            "area_mm2": 2827.433,
            "normal": [
              0,
              0,
              -1
            ],
            "center_mm": [
              -98.449,
              -68.723,
              -5.6
            ],
            "bbox_mm": [
              -148.449,
              -118.723,
              -5.6,
              -48.449,
              -18.723,
              -5.6
            ]
          }
        }
      ],
      "relations": []
    },
    "faces": [
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 1,
        "FaceKind": "cylinder",
        "AreaMm2": 4711.558,
        "CenterMm": [
          -98.449,
          -68.723,
          4.4
        ],
        "BBoxMm": [
          -138.449,
          -108.723,
          -5.6,
          -58.449,
          -28.723,
          14.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -68.723,
          -5.6
        ],
        "Axis": [
          0,
          0,
          1
        ],
        "RadiusMm": 40,
        "DiameterMm": 80,
        "OrientationRole": "vertical_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 2,
        "FaceKind": "cylinder",
        "AreaMm2": 131.095,
        "CenterMm": [
          -98.449,
          -115.223,
          4.4
        ],
        "BBoxMm": [
          -101.449,
          -118.723,
          1.4,
          -95.449,
          -111.723,
          7.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -14.3,
          4.4
        ],
        "Axis": [
          0,
          -1,
          0
        ],
        "RadiusMm": 3,
        "DiameterMm": 6,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 3,
        "FaceKind": "cylinder",
        "AreaMm2": 131.098,
        "CenterMm": [
          -51.949,
          -68.723,
          4.4
        ],
        "BBoxMm": [
          -55.449,
          -71.723,
          1.4,
          -48.449,
          -65.723,
          7.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -13.716,
          -68.723,
          4.4
        ],
        "Axis": [
          -1,
          0,
          0
        ],
        "RadiusMm": 3,
        "DiameterMm": 6,
        "OrientationRole": "side_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 4,
        "FaceKind": "cylinder",
        "AreaMm2": 510.823,
        "CenterMm": [
          -98.449,
          -69.013,
          39.4
        ],
        "BBoxMm": [
          -128.449,
          -71.723,
          24.4,
          -68.449,
          -66.303,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -123.723,
          54.4
        ],
        "Axis": [
          0,
          1,
          0
        ],
        "RadiusMm": 30,
        "DiameterMm": 60,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_cylindrical_fit_surface",
        "ProcessConfidence": "medium_high",
        "ProcessBasis": "coaxial cylindrical fit candidate",
        "MachiningScope": "full_contact_face"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 5,
        "FaceKind": "plane",
        "AreaMm2": 1389.698,
        "CenterMm": [
          -58.449,
          -68.436,
          54.4
        ],
        "BBoxMm": [
          -73.449,
          -111.15,
          54.4,
          -43.449,
          -25.723,
          54.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          54.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 6,
        "FaceKind": "plane",
        "AreaMm2": 1389.698,
        "CenterMm": [
          -138.449,
          -68.436,
          54.4
        ],
        "BBoxMm": [
          -153.449,
          -111.15,
          54.4,
          -123.449,
          -25.723,
          54.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          54.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 7,
        "FaceKind": "cylinder",
        "AreaMm2": 1185.637,
        "CenterMm": [
          -98.449,
          -40.013,
          39.4
        ],
        "BBoxMm": [
          -128.449,
          -46.303,
          24.4,
          -68.449,
          -33.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -123.723,
          54.4
        ],
        "Axis": [
          0,
          1,
          0
        ],
        "RadiusMm": 30,
        "DiameterMm": 60,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 8,
        "FaceKind": "cylinder",
        "AreaMm2": 3945.085,
        "CenterMm": [
          -142.64,
          -69.178,
          34.4
        ],
        "BBoxMm": [
          -153.449,
          -112.634,
          14.4,
          -131.831,
          -25.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -68.723,
          54.4
        ],
        "Axis": [
          -0,
          -0,
          -1
        ],
        "RadiusMm": 55,
        "DiameterMm": 110,
        "OrientationRole": "vertical_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 9,
        "FaceKind": "plane",
        "AreaMm2": 504.456,
        "CenterMm": [
          -58.191,
          -68.723,
          14.4
        ],
        "BBoxMm": [
          -72.934,
          -111.723,
          14.4,
          -43.449,
          -25.723,
          14.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          14.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 10,
        "FaceKind": "plane",
        "AreaMm2": 3343.356,
        "CenterMm": [
          -98.449,
          -68.723,
          14.4
        ],
        "BBoxMm": [
          -138.449,
          -108.723,
          14.4,
          -58.449,
          -28.723,
          14.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          14.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "machined_surface_candidate",
        "ProcessConfidence": "medium",
        "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation",
        "MachiningScope": "contact_patch_unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 11,
        "FaceKind": "cylinder",
        "AreaMm2": 3945.085,
        "CenterMm": [
          -54.258,
          -69.178,
          34.4
        ],
        "BBoxMm": [
          -65.066,
          -112.634,
          14.4,
          -43.449,
          -25.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -68.723,
          54.4
        ],
        "Axis": [
          -0,
          -0,
          -1
        ],
        "RadiusMm": 55,
        "DiameterMm": 110,
        "OrientationRole": "vertical_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 12,
        "FaceKind": "plane",
        "AreaMm2": 504.456,
        "CenterMm": [
          -138.706,
          -68.723,
          14.4
        ],
        "BBoxMm": [
          -153.449,
          -111.723,
          14.4,
          -123.964,
          -25.723,
          14.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          14.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 13,
        "FaceKind": "plane",
        "AreaMm2": 2827.433,
        "CenterMm": [
          -98.449,
          -68.723,
          -5.6
        ],
        "BBoxMm": [
          -148.449,
          -118.723,
          -5.6,
          -48.449,
          -18.723,
          -5.6
        ],
        "Normal": [
          0,
          0,
          -1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          -5.6
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "downward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 14,
        "FaceKind": "cylinder",
        "AreaMm2": 6170.076,
        "CenterMm": [
          -98.449,
          -68.723,
          4.4
        ],
        "BBoxMm": [
          -148.449,
          -118.723,
          -5.6,
          -48.449,
          -18.723,
          14.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -68.723,
          -5.6
        ],
        "Axis": [
          0,
          0,
          1
        ],
        "RadiusMm": 50,
        "DiameterMm": 100,
        "OrientationRole": "vertical_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 15,
        "FaceKind": "cylinder",
        "AreaMm2": 502.655,
        "CenterMm": [
          -138.449,
          -68.723,
          44.4
        ],
        "BBoxMm": [
          -142.449,
          -72.723,
          34.4,
          -134.449,
          -64.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -138.449,
          -68.723,
          34.4
        ],
        "Axis": [
          0,
          0,
          1
        ],
        "RadiusMm": 4,
        "DiameterMm": 8,
        "OrientationRole": "vertical_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 16,
        "FaceKind": "plane",
        "AreaMm2": 50.265,
        "CenterMm": [
          -138.449,
          -68.723,
          34.4
        ],
        "BBoxMm": [
          -142.449,
          -72.723,
          34.4,
          -134.449,
          -64.723,
          34.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -138.449,
          -68.723,
          34.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 17,
        "FaceKind": "cylinder",
        "AreaMm2": 502.655,
        "CenterMm": [
          -58.449,
          -68.723,
          44.4
        ],
        "BBoxMm": [
          -62.449,
          -72.723,
          34.4,
          -54.449,
          -64.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -58.449,
          -68.723,
          34.4
        ],
        "Axis": [
          0,
          0,
          1
        ],
        "RadiusMm": 4,
        "DiameterMm": 8,
        "OrientationRole": "vertical_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 18,
        "FaceKind": "plane",
        "AreaMm2": 50.265,
        "CenterMm": [
          -58.449,
          -68.723,
          34.4
        ],
        "BBoxMm": [
          -62.449,
          -72.723,
          34.4,
          -54.449,
          -64.723,
          34.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -58.449,
          -68.723,
          34.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 19,
        "FaceKind": "plane",
        "AreaMm2": 986.283,
        "CenterMm": [
          -98.449,
          -66.303,
          34.4
        ],
        "BBoxMm": [
          -128.449,
          -66.303,
          14.4,
          -68.449,
          -66.303,
          54.4
        ],
        "Normal": [
          -0,
          -1,
          0
        ],
        "RootPointMm": [
          -68.449,
          -66.303,
          59.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 20,
        "FaceKind": "plane",
        "AreaMm2": 800,
        "CenterMm": [
          -68.449,
          -56.303,
          34.4
        ],
        "BBoxMm": [
          -68.449,
          -66.303,
          14.4,
          -68.449,
          -46.303,
          54.4
        ],
        "Normal": [
          1,
          0,
          0
        ],
        "RootPointMm": [
          -68.449,
          -66.303,
          59.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 21,
        "FaceKind": "plane",
        "AreaMm2": 986.283,
        "CenterMm": [
          -98.449,
          -46.303,
          34.4
        ],
        "BBoxMm": [
          -128.449,
          -46.303,
          14.4,
          -68.449,
          -46.303,
          54.4
        ],
        "Normal": [
          0,
          1,
          0
        ],
        "RootPointMm": [
          -68.449,
          -46.303,
          59.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 22,
        "FaceKind": "plane",
        "AreaMm2": 800,
        "CenterMm": [
          -128.449,
          -56.303,
          34.4
        ],
        "BBoxMm": [
          -128.449,
          -66.303,
          14.4,
          -128.449,
          -46.303,
          54.4
        ],
        "Normal": [
          -1,
          0,
          0
        ],
        "RootPointMm": [
          -128.449,
          -66.303,
          59.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 23,
        "FaceKind": "plane",
        "AreaMm2": 241.684,
        "CenterMm": [
          -98.449,
          -22.223,
          14.4
        ],
        "BBoxMm": [
          -123.964,
          -25.723,
          14.4,
          -72.934,
          -18.723,
          14.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          14.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 24,
        "FaceKind": "plane",
        "AreaMm2": 1084.275,
        "CenterMm": [
          -98.449,
          -25.723,
          34.4
        ],
        "BBoxMm": [
          -132.742,
          -25.723,
          14.4,
          -64.156,
          -25.723,
          54.4
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -149.974,
          -25.723,
          -90.685
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 25,
        "FaceKind": "plane",
        "AreaMm2": 825.816,
        "CenterMm": [
          -98.449,
          -111.723,
          30.9
        ],
        "BBoxMm": [
          -132.742,
          -111.723,
          14.4,
          -64.156,
          -111.723,
          47.4
        ],
        "Normal": [
          0,
          1,
          0
        ],
        "RootPointMm": [
          -135.237,
          -111.723,
          -62.182
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 26,
        "FaceKind": "plane",
        "AreaMm2": 241.684,
        "CenterMm": [
          -98.449,
          -115.223,
          14.4
        ],
        "BBoxMm": [
          -123.964,
          -118.723,
          14.4,
          -72.934,
          -111.723,
          14.4
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -98.449,
          -68.723,
          14.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 27,
        "FaceKind": "cylinder",
        "AreaMm2": 131.095,
        "CenterMm": [
          -144.949,
          -68.723,
          4.4
        ],
        "BBoxMm": [
          -148.449,
          -71.723,
          1.4,
          -141.449,
          -65.723,
          7.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -13.716,
          -68.723,
          4.4
        ],
        "Axis": [
          -1,
          0,
          0
        ],
        "RadiusMm": 3,
        "DiameterMm": 6,
        "OrientationRole": "side_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 28,
        "FaceKind": "cylinder",
        "AreaMm2": 131.098,
        "CenterMm": [
          -98.449,
          -22.223,
          4.4
        ],
        "BBoxMm": [
          -101.449,
          -25.723,
          1.4,
          -95.449,
          -18.723,
          7.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -14.3,
          4.4
        ],
        "Axis": [
          0,
          -1,
          0
        ],
        "RadiusMm": 3,
        "DiameterMm": 6,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 29,
        "FaceKind": "plane",
        "AreaMm2": 245.437,
        "CenterMm": [
          -98.449,
          -33.723,
          38.15
        ],
        "BBoxMm": [
          -130.949,
          -33.723,
          21.9,
          -65.949,
          -33.723,
          54.4
        ],
        "Normal": [
          0,
          1,
          0
        ],
        "RootPointMm": [
          -98.449,
          -33.723,
          54.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "machined_surface_candidate",
        "ProcessConfidence": "medium",
        "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation",
        "MachiningScope": "contact_patch_unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 30,
        "FaceKind": "cylinder",
        "AreaMm2": 816.814,
        "CenterMm": [
          -98.449,
          -29.723,
          38.15
        ],
        "BBoxMm": [
          -130.949,
          -33.723,
          21.9,
          -65.949,
          -25.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -25.723,
          54.4
        ],
        "Axis": [
          0,
          -1,
          0
        ],
        "RadiusMm": 32.5,
        "DiameterMm": 65,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 31,
        "FaceKind": "cylinder",
        "AreaMm2": 3339.392,
        "CenterMm": [
          -98.449,
          -94.678,
          36.9
        ],
        "BBoxMm": [
          -133.449,
          -112.634,
          19.4,
          -63.449,
          -76.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -76.723,
          54.4
        ],
        "Axis": [
          -0,
          -1,
          -0
        ],
        "RadiusMm": 35,
        "DiameterMm": 70,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_cylindrical_fit_surface",
        "ProcessConfidence": "medium_high",
        "ProcessBasis": "coaxial cylindrical fit candidate",
        "MachiningScope": "full_contact_face"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 32,
        "FaceKind": "plane",
        "AreaMm2": 903.993,
        "CenterMm": [
          -98.449,
          -76.723,
          36.9
        ],
        "BBoxMm": [
          -133.449,
          -76.723,
          19.4,
          -63.449,
          -76.723,
          54.4
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -98.449,
          -76.723,
          54.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 33,
        "FaceKind": "cylinder",
        "AreaMm2": 392.699,
        "CenterMm": [
          -98.449,
          -74.223,
          41.9
        ],
        "BBoxMm": [
          -123.449,
          -76.723,
          29.4,
          -73.449,
          -71.723,
          54.4
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -98.449,
          -71.723,
          54.4
        ],
        "Axis": [
          0,
          -1,
          0
        ],
        "RadiusMm": 25,
        "DiameterMm": 50,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_cylindrical_fit_surface",
        "ProcessConfidence": "medium_high",
        "ProcessBasis": "coaxial cylindrical fit candidate",
        "MachiningScope": "full_contact_face"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 34,
        "FaceKind": "plane",
        "AreaMm2": 431.969,
        "CenterMm": [
          -98.449,
          -71.723,
          39.4
        ],
        "BBoxMm": [
          -128.449,
          -71.723,
          24.4,
          -68.449,
          -71.723,
          54.4
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -98.449,
          -71.723,
          54.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "machined_surface_candidate",
        "ProcessConfidence": "medium",
        "ProcessBasis": "planar_mating_face: contact is evidence, but process role needs tolerance/PMI or functional confirmation",
        "MachiningScope": "contact_patch_unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 35,
        "FaceKind": "cylinder",
        "AreaMm2": 43.982,
        "CenterMm": [
          -73.855,
          -74.723,
          35.529
        ],
        "BBoxMm": [
          -75.605,
          -76.723,
          33.779,
          -72.105,
          -72.723,
          37.279
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -73.855,
          -72.723,
          35.529
        ],
        "Axis": [
          -0,
          -1,
          -0
        ],
        "RadiusMm": 1.75,
        "DiameterMm": 3.5,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 36,
        "FaceKind": "plane",
        "AreaMm2": 9.621,
        "CenterMm": [
          -73.855,
          -72.723,
          35.529
        ],
        "BBoxMm": [
          -75.605,
          -72.723,
          33.779,
          -72.105,
          -72.723,
          37.279
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -73.855,
          -72.723,
          35.529
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 37,
        "FaceKind": "cylinder",
        "AreaMm2": 43.982,
        "CenterMm": [
          -94.403,
          -74.723,
          23.666
        ],
        "BBoxMm": [
          -96.153,
          -76.723,
          21.916,
          -92.653,
          -72.723,
          25.416
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -94.403,
          -72.723,
          23.666
        ],
        "Axis": [
          -0,
          -1,
          -0
        ],
        "RadiusMm": 1.75,
        "DiameterMm": 3.5,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 38,
        "FaceKind": "plane",
        "AreaMm2": 9.621,
        "CenterMm": [
          -94.403,
          -72.723,
          23.666
        ],
        "BBoxMm": [
          -96.153,
          -72.723,
          21.916,
          -92.653,
          -72.723,
          25.416
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -94.403,
          -72.723,
          23.666
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 39,
        "FaceKind": "cylinder",
        "AreaMm2": 43.982,
        "CenterMm": [
          -117.32,
          -74.723,
          29.807
        ],
        "BBoxMm": [
          -119.07,
          -76.723,
          28.057,
          -115.57,
          -72.723,
          31.557
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -117.32,
          -72.723,
          29.807
        ],
        "Axis": [
          -0,
          -1,
          -0
        ],
        "RadiusMm": 1.75,
        "DiameterMm": 3.5,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 40,
        "FaceKind": "plane",
        "AreaMm2": 9.621,
        "CenterMm": [
          -117.32,
          -72.723,
          29.807
        ],
        "BBoxMm": [
          -119.07,
          -72.723,
          28.057,
          -115.57,
          -72.723,
          31.557
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -117.32,
          -72.723,
          29.807
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 41,
        "FaceKind": "cylinder",
        "AreaMm2": 43.982,
        "CenterMm": [
          -129.184,
          -74.723,
          50.354
        ],
        "BBoxMm": [
          -130.934,
          -76.723,
          48.604,
          -127.434,
          -72.723,
          52.104
        ],
        "Normal": [],
        "RootPointMm": [],
        "AxisPointMm": [
          -129.184,
          -72.723,
          50.354
        ],
        "Axis": [
          -0,
          -1,
          -0
        ],
        "RadiusMm": 1.75,
        "DiameterMm": 3.5,
        "OrientationRole": "shaft_axis_cylindrical_face",
        "FunctionalRole": "cylindrical_feature",
        "SurfaceProcessRole": "machined_feature_candidate",
        "ProcessConfidence": "low",
        "ProcessBasis": "cylindrical hole/boss feature is often produced by machining, but functional precision role is not confirmed",
        "MachiningScope": "feature_surface"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 42,
        "FaceKind": "plane",
        "AreaMm2": 9.621,
        "CenterMm": [
          -129.184,
          -72.723,
          50.354
        ],
        "BBoxMm": [
          -130.934,
          -72.723,
          48.604,
          -127.434,
          -72.723,
          52.104
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -129.184,
          -72.723,
          50.354
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 43,
        "FaceKind": "plane",
        "AreaMm2": 50.317,
        "CenterMm": [
          -55.449,
          -68.723,
          4.4
        ],
        "BBoxMm": [
          -55.449,
          -74.223,
          -0.363,
          -55.449,
          -63.223,
          9.164
        ],
        "Normal": [
          -1,
          0,
          0
        ],
        "RootPointMm": [
          -55.449,
          -68.723,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 44,
        "FaceKind": "plane",
        "AreaMm2": 50.317,
        "CenterMm": [
          -141.449,
          -68.723,
          4.4
        ],
        "BBoxMm": [
          -141.449,
          -74.223,
          -0.363,
          -141.449,
          -63.223,
          9.164
        ],
        "Normal": [
          -1,
          0,
          0
        ],
        "RootPointMm": [
          -141.449,
          -68.723,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 45,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -139.759,
          -72.848,
          6.782
        ],
        "BBoxMm": [
          -141.449,
          -74.223,
          4.4,
          -138.069,
          -71.473,
          9.164
        ],
        "Normal": [
          0,
          0.866,
          -0.5
        ],
        "RootPointMm": [
          -156,
          -74.223,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 46,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -139.759,
          -72.848,
          2.019
        ],
        "BBoxMm": [
          -141.449,
          -74.223,
          -0.363,
          -138.069,
          -71.473,
          4.4
        ],
        "Normal": [
          0,
          0.866,
          0.5
        ],
        "RootPointMm": [
          -156,
          -71.473,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 47,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -139.902,
          -68.723,
          -0.363
        ],
        "BBoxMm": [
          -141.449,
          -71.473,
          -0.363,
          -138.354,
          -65.973,
          -0.363
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -156,
          -65.973,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 48,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -139.759,
          -64.598,
          2.019
        ],
        "BBoxMm": [
          -141.449,
          -65.973,
          -0.363,
          -138.069,
          -63.223,
          4.4
        ],
        "Normal": [
          -0,
          -0.866,
          0.5
        ],
        "RootPointMm": [
          -156,
          -63.223,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 49,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -139.759,
          -64.598,
          6.782
        ],
        "BBoxMm": [
          -141.449,
          -65.973,
          4.4,
          -138.069,
          -63.223,
          9.164
        ],
        "Normal": [
          -0,
          -0.866,
          -0.5
        ],
        "RootPointMm": [
          -156,
          -65.973,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 50,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -139.902,
          -68.723,
          9.164
        ],
        "BBoxMm": [
          -141.449,
          -71.473,
          9.164,
          -138.354,
          -65.973,
          9.164
        ],
        "Normal": [
          -0,
          -0,
          -1
        ],
        "RootPointMm": [
          -156,
          -71.473,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "downward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 51,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -56.996,
          -68.723,
          9.164
        ],
        "BBoxMm": [
          -58.543,
          -71.473,
          9.164,
          -55.449,
          -65.973,
          9.164
        ],
        "Normal": [
          -0,
          -0,
          -1
        ],
        "RootPointMm": [
          -156,
          -71.473,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "downward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 52,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -57.139,
          -72.848,
          2.019
        ],
        "BBoxMm": [
          -58.829,
          -74.223,
          -0.363,
          -55.449,
          -71.473,
          4.4
        ],
        "Normal": [
          0,
          0.866,
          0.5
        ],
        "RootPointMm": [
          -156,
          -71.473,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 53,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -57.139,
          -72.848,
          6.782
        ],
        "BBoxMm": [
          -58.829,
          -74.223,
          4.4,
          -55.449,
          -71.473,
          9.164
        ],
        "Normal": [
          0,
          0.866,
          -0.5
        ],
        "RootPointMm": [
          -156,
          -74.223,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 54,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -57.139,
          -64.598,
          6.782
        ],
        "BBoxMm": [
          -58.829,
          -65.973,
          4.4,
          -55.449,
          -63.223,
          9.164
        ],
        "Normal": [
          -0,
          -0.866,
          -0.5
        ],
        "RootPointMm": [
          -156,
          -65.973,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 55,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -57.139,
          -64.598,
          2.019
        ],
        "BBoxMm": [
          -58.829,
          -65.973,
          -0.363,
          -55.449,
          -63.223,
          4.4
        ],
        "Normal": [
          -0,
          -0.866,
          0.5
        ],
        "RootPointMm": [
          -156,
          -63.223,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 56,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -56.996,
          -68.723,
          -0.363
        ],
        "BBoxMm": [
          -58.543,
          -71.473,
          -0.363,
          -55.449,
          -65.973,
          -0.363
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -156,
          -65.973,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 57,
        "FaceKind": "plane",
        "AreaMm2": 50.317,
        "CenterMm": [
          -98.449,
          -25.723,
          4.4
        ],
        "BBoxMm": [
          -103.949,
          -25.723,
          -0.363,
          -92.949,
          -25.723,
          9.164
        ],
        "Normal": [
          0,
          1,
          0
        ],
        "RootPointMm": [
          -98.449,
          -25.723,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 58,
        "FaceKind": "plane",
        "AreaMm2": 50.317,
        "CenterMm": [
          -98.449,
          -111.723,
          4.4
        ],
        "BBoxMm": [
          -103.949,
          -111.723,
          -0.363,
          -92.949,
          -111.723,
          9.164
        ],
        "Normal": [
          0,
          1,
          0
        ],
        "RootPointMm": [
          -98.449,
          -111.723,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 59,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -94.324,
          -110.033,
          6.782
        ],
        "BBoxMm": [
          -95.699,
          -111.723,
          4.4,
          -92.949,
          -108.343,
          9.164
        ],
        "Normal": [
          -0.866,
          0,
          -0.5
        ],
        "RootPointMm": [
          -92.949,
          -126.275,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 60,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -98.449,
          -110.176,
          9.164
        ],
        "BBoxMm": [
          -101.199,
          -111.723,
          9.164,
          -95.699,
          -108.629,
          9.164
        ],
        "Normal": [
          0,
          0,
          -1
        ],
        "RootPointMm": [
          -95.699,
          -126.275,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "downward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 61,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -102.574,
          -110.033,
          6.782
        ],
        "BBoxMm": [
          -103.949,
          -111.723,
          4.4,
          -101.199,
          -108.343,
          9.164
        ],
        "Normal": [
          0.866,
          -0,
          -0.5
        ],
        "RootPointMm": [
          -101.199,
          -126.275,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 62,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -102.574,
          -110.033,
          2.019
        ],
        "BBoxMm": [
          -103.949,
          -111.723,
          -0.363,
          -101.199,
          -108.343,
          4.4
        ],
        "Normal": [
          0.866,
          -0,
          0.5
        ],
        "RootPointMm": [
          -103.949,
          -126.275,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 63,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -98.449,
          -110.176,
          -0.363
        ],
        "BBoxMm": [
          -101.199,
          -111.723,
          -0.363,
          -95.699,
          -108.629,
          -0.363
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -101.199,
          -126.275,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 64,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -94.324,
          -110.033,
          2.019
        ],
        "BBoxMm": [
          -95.699,
          -111.723,
          -0.363,
          -92.949,
          -108.343,
          4.4
        ],
        "Normal": [
          -0.866,
          0,
          0.5
        ],
        "RootPointMm": [
          -95.699,
          -126.275,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 65,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -94.324,
          -27.413,
          2.019
        ],
        "BBoxMm": [
          -95.699,
          -29.103,
          -0.363,
          -92.949,
          -25.723,
          4.4
        ],
        "Normal": [
          -0.866,
          0,
          0.5
        ],
        "RootPointMm": [
          -95.699,
          -126.275,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 66,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -98.449,
          -27.271,
          -0.363
        ],
        "BBoxMm": [
          -101.199,
          -28.818,
          -0.363,
          -95.699,
          -25.723,
          -0.363
        ],
        "Normal": [
          0,
          0,
          1
        ],
        "RootPointMm": [
          -101.199,
          -126.275,
          -0.363
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "upward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 67,
        "FaceKind": "plane",
        "AreaMm2": 16.673,
        "CenterMm": [
          -98.449,
          -27.271,
          9.164
        ],
        "BBoxMm": [
          -101.199,
          -28.818,
          9.164,
          -95.699,
          -25.723,
          9.164
        ],
        "Normal": [
          0,
          0,
          -1
        ],
        "RootPointMm": [
          -95.699,
          -126.275,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "downward_facing_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 68,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -94.324,
          -27.413,
          6.782
        ],
        "BBoxMm": [
          -95.699,
          -29.103,
          4.4,
          -92.949,
          -25.723,
          9.164
        ],
        "Normal": [
          -0.866,
          0,
          -0.5
        ],
        "RootPointMm": [
          -92.949,
          -126.275,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 69,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -102.574,
          -27.413,
          2.019
        ],
        "BBoxMm": [
          -103.949,
          -29.103,
          -0.363,
          -101.199,
          -25.723,
          4.4
        ],
        "Normal": [
          0.866,
          -0,
          0.5
        ],
        "RootPointMm": [
          -103.949,
          -126.275,
          4.4
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 70,
        "FaceKind": "plane",
        "AreaMm2": 17.717,
        "CenterMm": [
          -102.574,
          -27.413,
          6.782
        ],
        "BBoxMm": [
          -103.949,
          -29.103,
          4.4,
          -101.199,
          -25.723,
          9.164
        ],
        "Normal": [
          0.866,
          -0,
          -0.5
        ],
        "RootPointMm": [
          -101.199,
          -126.275,
          9.164
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 71,
        "FaceKind": "plane",
        "AreaMm2": 133.712,
        "CenterMm": [
          -115.146,
          -97.459,
          19.02
        ],
        "BBoxMm": [
          -115.146,
          -104.695,
          14.4,
          -115.146,
          -90.223,
          23.64
        ],
        "Normal": [
          -1,
          -0,
          -0
        ],
        "RootPointMm": [
          -115.146,
          -90.223,
          -22.6
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 72,
        "FaceKind": "plane",
        "AreaMm2": 212.905,
        "CenterMm": [
          -98.452,
          -90.223,
          19.02
        ],
        "BBoxMm": [
          -115.146,
          -90.223,
          14.4,
          -81.757,
          -90.223,
          23.64
        ],
        "Normal": [
          0,
          1,
          0
        ],
        "RootPointMm": [
          -115.146,
          -90.223,
          -22.6
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 73,
        "FaceKind": "plane",
        "AreaMm2": 133.669,
        "CenterMm": [
          -81.757,
          -97.459,
          19.019
        ],
        "BBoxMm": [
          -81.757,
          -104.695,
          14.4,
          -81.757,
          -90.223,
          23.637
        ],
        "Normal": [
          1,
          0,
          0
        ],
        "RootPointMm": [
          -81.757,
          -90.223,
          -22.6
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "side_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      },
      {
        "ComponentName": "电机与大臂外壳连接件1-1",
        "ComponentDisplayName": "电机与大臂外壳连接件1-1 (电机与大臂外壳连接件1)",
        "ComponentPath": "D:\\Desktop\\新建文件夹\\毕设\\建模\\小臂肘关节装配\\电机与大臂外壳连接件1.SLDPRT",
        "ComponentFileName": "电机与大臂外壳连接件1.SLDPRT",
        "ComponentCategory": "unknown",
        "FaceIndex": 74,
        "FaceKind": "plane",
        "AreaMm2": 212.905,
        "CenterMm": [
          -98.452,
          -104.695,
          19.02
        ],
        "BBoxMm": [
          -115.146,
          -104.695,
          14.4,
          -81.757,
          -104.695,
          23.64
        ],
        "Normal": [
          0,
          -1,
          0
        ],
        "RootPointMm": [
          -115.146,
          -104.695,
          -22.6
        ],
        "AxisPointMm": [],
        "Axis": [],
        "RadiusMm": 0,
        "DiameterMm": 0,
        "OrientationRole": "axial_end_face",
        "FunctionalRole": "planar_feature",
        "SurfaceProcessRole": "unknown_process_surface",
        "ProcessConfidence": "low",
        "ProcessBasis": "no contact, fit, support, sealing, locating, tolerance or PMI evidence",
        "MachiningScope": "unknown"
      }
    ],
    "counts": {
      "features": 12,
      "faces": 74,
      "image_views": 7
    },
    "image_policy": "All initial extraction images and part_check reused images are excluded from the post-functional-group part-level checking stage. Use available_target_images with image_kind=functional_group_all_face_highlight only."
  },
  "target_context_image_plans": [],
  "available_target_images": [
    {
      "evidence_name": "extractions/primary_y/model_images/component_highlights/component_37/best_oblique.jpg",
      "image_kind": "assembly_component_highlight_view",
      "evidence_family": "assembly_component_position",
      "evidence_purpose": "component_position_and_whole_component_function",
      "position_visibility": "unobstructed",
      "view_name": "highlight_component_37_best_oblique",
      "requested_view": "best_oblique",
      "highlight_plan_id": "assembly_context_highlight_component_37",
      "highlight_component_id": "component_37",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [],
      "physical_interface_id": "",
      "source_contact_ids": [],
      "interface_axis_mm": [],
      "interface_center_mm": [],
      "interface_bbox_mm": [],
      "interface_analysis_priority": 0,
      "interface_confidence_tier": "",
      "interface_evidence_purpose": "",
      "trimmed_patch_verified": false,
      "interface_verification_status": "",
      "interface_verification_methods": [],
      "interface_verification_sample_hits": 0,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "",
      "actual_assembly_position": false,
      "not_actual_clearance": false,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_37\\best_oblique.jpg"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1",
      "highlight_component_id": "component_6",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/CSG-20-50-2A-GR-MHC_b-1:face#64",
        "电机与大臂外壳连接件1-1:face#31"
      ],
      "physical_interface_id": "physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_CSG_20_160_2A_SP_C_8_WG1044040_MHC_1_CSG_20_50_2A_GR_MHC_b_1_face_64__电机与大臂外壳连接件1_1_face_31"
      ],
      "interface_axis_mm": [
        -0,
        1,
        -0
      ],
      "interface_center_mm": [
        -98.449,
        -90.0755,
        45.65
      ],
      "interface_bbox_mm": [
        -147.523,
        -112.634,
        5.326,
        -49.375,
        -76.723,
        103.474
      ],
      "interface_analysis_priority": 47.26,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        -0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1\\assembled_oblique.jpg"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "highlight_component_id": "component_35",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#408",
        "电机与大臂外壳连接件1-1:face#4"
      ],
      "physical_interface_id": "physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_408__电机与大臂外壳连接件1_1_face_4"
      ],
      "interface_axis_mm": [
        -0,
        1,
        0
      ],
      "interface_center_mm": [
        -90.949,
        -68.368,
        46.9
      ],
      "interface_bbox_mm": [
        -128.449,
        -71.723,
        24.4,
        -68.449,
        -64.023,
        84.4
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "highlight_component_id": "component_35",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#412",
        "电机与大臂外壳连接件1-1:face#4"
      ],
      "physical_interface_id": "physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_412__电机与大臂外壳连接件1_1_face_4"
      ],
      "interface_axis_mm": [
        -0,
        1,
        0
      ],
      "interface_center_mm": [
        -105.949,
        -68.368,
        46.9
      ],
      "interface_bbox_mm": [
        -128.449,
        -71.723,
        24.4,
        -68.449,
        -64.023,
        84.4
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        -0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "highlight_component_id": "component_2",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6",
        "电机与大臂外壳连接件1-1:face#31"
      ],
      "physical_interface_id": "physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件1_1_face_31"
      ],
      "interface_axis_mm": [
        -0,
        1,
        -0
      ],
      "interface_center_mm": [
        -98.449,
        -86.9505,
        45.65
      ],
      "interface_bbox_mm": [
        -146.26,
        -112.634,
        6.59,
        -50.638,
        -76.723,
        102.211
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        -0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "highlight_component_id": "component_2",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24",
        "电机与大臂外壳连接件1-1:face#33"
      ],
      "physical_interface_id": "physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件1_1_face_33"
      ],
      "interface_axis_mm": [
        -0,
        1,
        -0
      ],
      "interface_center_mm": [
        -98.449,
        -74.223,
        48.15
      ],
      "interface_bbox_mm": [
        -132.599,
        -76.723,
        20.25,
        -64.298,
        -71.723,
        88.551
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        -0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "highlight_component_id": "component_35",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#148",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#174",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#194",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#410",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#116",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#432",
        "电机与大臂外壳连接件1-1:face#10",
        "电机与大臂外壳连接件1-1:face#34",
        "电机与大臂外壳连接件1-1:face#29"
      ],
      "physical_interface_id": "physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_148__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_174__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_194__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_410__电机与大臂外壳连接件1_1_face_34",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_116__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_432__电机与大臂外壳连接件1_1_face_29"
      ],
      "interface_axis_mm": [],
      "interface_center_mm": [
        -98.43233333333332,
        -59.422999999999995,
        25.145833333333332
      ],
      "interface_bbox_mm": [
        -138.449,
        -108.723,
        14.4,
        -58.449,
        -28.723,
        84.1
      ],
      "interface_analysis_priority": 35.4,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_interface_confirmed",
      "interface_verification_methods": [
        "planar_tessellated_trimmed_domain_intersection"
      ],
      "interface_verification_sample_hits": 6,
      "interface_verification_min_distance_mm": 26005.1772,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/component_highlights/component_37/best_oblique.jpg",
      "image_kind": "assembly_component_highlight_view",
      "evidence_family": "assembly_component_position",
      "evidence_purpose": "component_position_and_whole_component_function",
      "position_visibility": "unobstructed",
      "view_name": "highlight_component_37_best_oblique",
      "requested_view": "best_oblique",
      "highlight_plan_id": "assembly_context_highlight_component_37",
      "highlight_component_id": "component_37",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [],
      "physical_interface_id": "",
      "source_contact_ids": [],
      "interface_axis_mm": [],
      "interface_center_mm": [],
      "interface_bbox_mm": [],
      "interface_analysis_priority": 0,
      "interface_confidence_tier": "",
      "interface_evidence_purpose": "",
      "trimmed_patch_verified": false,
      "interface_verification_status": "",
      "interface_verification_methods": [],
      "interface_verification_sample_hits": 0,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "",
      "actual_assembly_position": false,
      "not_actual_clearance": false,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\component_highlights\\component_37\\best_oblique.jpg",
      "evidence_source": "reused_initial_assembly_extraction",
      "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1",
      "highlight_component_id": "component_6",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/CSG-20-160-2A-SP_C_8_WG1044040-MHC-1/CSG-20-50-2A-GR-MHC_b-1:face#64",
        "电机与大臂外壳连接件1-1:face#31"
      ],
      "physical_interface_id": "physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_CSG_20_160_2A_SP_C_8_WG1044040_MHC_1_CSG_20_50_2A_GR_MHC_b_1_face_64__电机与大臂外壳连接件1_1_face_31"
      ],
      "interface_axis_mm": [
        -0,
        1,
        -0
      ],
      "interface_center_mm": [
        -98.449,
        -90.0755,
        45.65
      ],
      "interface_bbox_mm": [
        -147.523,
        -112.634,
        5.326,
        -49.375,
        -76.723,
        103.474
      ],
      "interface_analysis_priority": 47.26,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        -0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_001_CSG_20_50_2A_GR_MHC_b__电机与大臂外壳连接件1\\assembled_oblique.jpg",
      "evidence_source": "reused_initial_assembly_extraction",
      "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "highlight_component_id": "component_35",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#408",
        "电机与大臂外壳连接件1-1:face#4"
      ],
      "physical_interface_id": "physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_408__电机与大臂外壳连接件1_1_face_4"
      ],
      "interface_axis_mm": [
        -0,
        1,
        0
      ],
      "interface_center_mm": [
        -90.949,
        -68.368,
        46.9
      ],
      "interface_bbox_mm": [
        -128.449,
        -71.723,
        24.4,
        -68.449,
        -64.023,
        84.4
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_004_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg",
      "evidence_source": "reused_initial_assembly_extraction",
      "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "highlight_component_id": "component_35",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#412",
        "电机与大臂外壳连接件1-1:face#4"
      ],
      "physical_interface_id": "physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_412__电机与大臂外壳连接件1_1_face_4"
      ],
      "interface_axis_mm": [
        -0,
        1,
        0
      ],
      "interface_center_mm": [
        -105.949,
        -68.368,
        46.9
      ],
      "interface_bbox_mm": [
        -128.449,
        -71.723,
        24.4,
        -68.449,
        -64.023,
        84.4
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        -0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_005_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg",
      "evidence_source": "reused_initial_assembly_extraction",
      "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "highlight_component_id": "component_2",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#6",
        "电机与大臂外壳连接件1-1:face#31"
      ],
      "physical_interface_id": "physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_6__电机与大臂外壳连接件1_1_face_31"
      ],
      "interface_axis_mm": [
        -0,
        1,
        -0
      ],
      "interface_center_mm": [
        -98.449,
        -86.9505,
        45.65
      ],
      "interface_bbox_mm": [
        -146.26,
        -112.634,
        6.59,
        -50.638,
        -76.723,
        102.211
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        -0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_008_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg",
      "evidence_source": "reused_initial_assembly_extraction",
      "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "highlight_component_id": "component_2",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/小臂电机减速器连接法兰-1:face#24",
        "电机与大臂外壳连接件1-1:face#33"
      ],
      "physical_interface_id": "physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_小臂电机减速器连接法兰_1_face_24__电机与大臂外壳连接件1_1_face_33"
      ],
      "interface_axis_mm": [
        -0,
        1,
        -0
      ],
      "interface_center_mm": [
        -98.449,
        -74.223,
        48.15
      ],
      "interface_bbox_mm": [
        -132.599,
        -76.723,
        20.25,
        -64.298,
        -71.723,
        88.551
      ],
      "interface_analysis_priority": 47.2,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_cylindrical_domain_confirmed",
      "interface_verification_methods": [
        "cylindrical_trimmed_face_2mm_slice_angular_intersection"
      ],
      "interface_verification_sample_hits": 1,
      "interface_verification_min_distance_mm": 0,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        -0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_009_小臂电机减速器连接法兰__电机与大臂外壳连接件1\\assembled_oblique.jpg",
      "evidence_source": "reused_initial_assembly_extraction",
      "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output"
    },
    {
      "evidence_name": "extractions/primary_y/model_images/physical_interfaces/physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1/assembled_oblique.jpg",
      "image_kind": "assembly_physical_interface_view",
      "evidence_family": "assembly_physical_interface",
      "evidence_purpose": "contact_and_fit_function_analysis",
      "position_visibility": "interface_isolated",
      "view_name": "interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1_assembled_oblique",
      "requested_view": "assembled_oblique",
      "highlight_plan_id": "physical_interface_highlight_physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "highlight_component_id": "component_35",
      "highlight_feature_id": "",
      "highlight_feature_type": "",
      "highlight_face_refs": [
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#148",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#174",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#194",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#410",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#116",
        "小臂关节装配2-1/EC60fl-150W-V2.stp-1:face#432",
        "电机与大臂外壳连接件1-1:face#10",
        "电机与大臂外壳连接件1-1:face#34",
        "电机与大臂外壳连接件1-1:face#29"
      ],
      "physical_interface_id": "physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1",
      "source_contact_ids": [
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_148__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_174__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_194__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_410__电机与大臂外壳连接件1_1_face_34",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_116__电机与大臂外壳连接件1_1_face_10",
        "contact_小臂关节装配2_1_EC60fl_150W_V2_stp_1_face_432__电机与大臂外壳连接件1_1_face_29"
      ],
      "interface_axis_mm": [],
      "interface_center_mm": [
        -98.43233333333332,
        -59.422999999999995,
        25.145833333333332
      ],
      "interface_bbox_mm": [
        -138.449,
        -108.723,
        14.4,
        -58.449,
        -28.723,
        84.1
      ],
      "interface_analysis_priority": 35.4,
      "interface_confidence_tier": "high",
      "interface_evidence_purpose": "physical_interface_function_analysis",
      "trimmed_patch_verified": true,
      "interface_verification_status": "trimmed_interface_confirmed",
      "interface_verification_methods": [
        "planar_tessellated_trimmed_domain_intersection"
      ],
      "interface_verification_sample_hits": 6,
      "interface_verification_min_distance_mm": 26005.1772,
      "interface_display_mode": "actual_assembly_position_with_native_selected_interface_faces",
      "actual_assembly_position": true,
      "not_actual_clearance": true,
      "highlight_view_direction_mm": [
        0.5773502691896258,
        0.5773502691896258,
        -0.5773502691896258
      ],
      "highlight_blocking_face_refs": [],
      "output_path": "D:\\CSharpProjects\\agent4\\runtime\\2\\extractions\\primary_y\\model_images\\physical_interfaces\\physical_interface_003_EC60fl_150W_V2_stp__电机与大臂外壳连接件1\\assembled_oblique.jpg",
      "evidence_source": "reused_initial_assembly_extraction",
      "path_policy": "logical part-check evidence is separated under part_check_extractions, while the image file is reused from the initial extraction output"
    }
  ]
}